Running Speed and Cadence

• The BLE-Running-Speed-and-Cadence demonstrating Bluetooth® SIG Running Speed and Cadence Profile 1.0 example, based on STM32CubeWBA v1.3.1

Hardware Needed

• This example runs on STM32WBAxx devices.
• Connect the Nucleo Board to your PC with a USB cable type A to mini-B to ST-LINK connector (USB_STLINK).

User's Guide

1. Run this Bluetooth® Low Energy Running Speed and Cadence project where the STM32WBA will advertise

2. Use the ANDROID/IOS ST BLE Sensor application or ST BLE Toolbox application to connect with this Bluetooth® Low Energy Running Speed and Cadence Profile 1.0 (RSC_XX where XX is the 2 last digit of the Bluetooth® Device Address)

   Scan on ANDROID/IOS:

   

   After Connection and Selecting the Running Speed and Cadence Service on ANDROID/IOS you will see the following Characteristics:

   

3. Use terminal programs like Tera Term to see the logs of each board via the onboard ST-Link. (115200/8/1/n)

   

Troubleshooting

Caution : Issues and the pull-requests are not supported to submit problems or suggestions related to the software delivered in this repository. The BLE-Running-Speed-and-Cadence example is being delivered as-is, and not necessarily supported by ST.

For any other question related to the product, the hardware performance or characteristics, the tools, the environment, you can submit it to the ST Community on the STM32 MCUs related page.