gPhoto-WebCam

Uses gphoto to create a virtual webcamera

A gambas project that is really just a skin.

You will need gphoto2, v4l2loopback and gambas.

Also, I expect that your user is setup as SuperUser (sudo)

Directions

gphoto2 v4l2loopback gambas3

Check your distros for how to install

Open gambas and then complile.

or use one of the prebuilt files. a deb (Ubuntu not tested) and rpm (fedora)

Plug in your camera via USB if it is supported the name will appear in the form.

If you haven't perminatly set up v4l2loopback, complete step 2. Otherwise skip to step 5.

Goto the v4l2loopback tab
Type your password (not saved)
Click Reset loopback devices This will add 2 devices. One for OBS one named after your camera.
Switch to the Webcam tab
If your camera is not an Canon M50 uncheck the box.
Select the output device
Click on the 'Start'

If you have any problems, try reseting your camera and stopping and Starting the Webcam app

Note: If you close the App the webcam will stop.

This is the first alpha version. I plan to support mutiple cameras and background removal / replacement

You can't reset v4l2loopback when the webcam is active

You will need to run reset v4l2loopback each time as it is not perminant