diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9eb085f359ce3f..21740e2b8f0781 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -544,6 +544,7 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned int length)
 int dwc3_event_buffers_setup(struct dwc3 *dwc)
 {
 	struct dwc3_event_buffer	*evt;
+	u32				reg;
 
 	if (!dwc->ev_buf)
 		return 0;
@@ -556,8 +557,10 @@ int dwc3_event_buffers_setup(struct dwc3 *dwc)
 			upper_32_bits(evt->dma));
 	dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0),
 			DWC3_GEVNTSIZ_SIZE(evt->length));
-	dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
 
+	/* Clear any stale event */
+	reg = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+	dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), reg);
 	return 0;
 }
 
@@ -584,7 +587,10 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc)
 	dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), 0);
 	dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), DWC3_GEVNTSIZ_INTMASK
 			| DWC3_GEVNTSIZ_SIZE(0));
-	dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0);
+
+	/* Clear any stale event */
+	reg = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
+	dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), reg);
 }
 
 static void dwc3_core_num_eps(struct dwc3 *dwc)
@@ -2499,7 +2505,11 @@ static int dwc3_runtime_resume(struct device *dev)
 
 	switch (dwc->current_dr_role) {
 	case DWC3_GCTL_PRTCAP_DEVICE:
-		dwc3_gadget_process_pending_events(dwc);
+		if (dwc->pending_events) {
+			pm_runtime_put(dwc->dev);
+			dwc->pending_events = false;
+			enable_irq(dwc->irq_gadget);
+		}
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
 	default:
@@ -2552,7 +2562,7 @@ static int dwc3_suspend(struct device *dev)
 static int dwc3_resume(struct device *dev)
 {
 	struct dwc3	*dwc = dev_get_drvdata(dev);
-	int		ret;
+	int		ret = 0;
 
 	pinctrl_pm_select_default_state(dev);
 
@@ -2560,14 +2570,12 @@ static int dwc3_resume(struct device *dev)
 	pm_runtime_set_active(dev);
 
 	ret = dwc3_resume_common(dwc, PMSG_RESUME);
-	if (ret) {
+	if (ret)
 		pm_runtime_set_suspended(dev);
-		return ret;
-	}
 
 	pm_runtime_enable(dev);
 
-	return 0;
+	return ret;
 }
 
 static void dwc3_complete(struct device *dev)
@@ -2589,6 +2597,12 @@ static void dwc3_complete(struct device *dev)
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
 	.complete = dwc3_complete,
+
+	/*
+	 * Runtime suspend halts the controller on disconnection. It relies on
+	 * platforms with custom connection notification to start the controller
+	 * again.
+	 */
 	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
 			dwc3_runtime_idle)
 };
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c71240e8f7c7da..9c508e0c5cdf54 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -1675,7 +1675,6 @@ static inline void dwc3_otg_host_init(struct dwc3 *dwc)
 #if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
 int dwc3_gadget_suspend(struct dwc3 *dwc);
 int dwc3_gadget_resume(struct dwc3 *dwc);
-void dwc3_gadget_process_pending_events(struct dwc3 *dwc);
 #else
 static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
@@ -1687,9 +1686,6 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc)
 	return 0;
 }
 
-static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
-{
-}
 #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
 
 #if IS_ENABLED(CONFIG_USB_DWC3_ULPI)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 291bc549935bb1..10178e5eda5a3f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -4728,14 +4728,3 @@ int dwc3_gadget_resume(struct dwc3 *dwc)
 
 	return dwc3_gadget_soft_connect(dwc);
 }
-
-void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
-{
-	if (dwc->pending_events) {
-		dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf);
-		dwc3_thread_interrupt(dwc->irq_gadget, dwc->ev_buf);
-		pm_runtime_put(dwc->dev);
-		dwc->pending_events = false;
-		enable_irq(dwc->irq_gadget);
-	}
-}
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index cf6478f97f4a3d..a6f46364be65f0 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1696,6 +1696,7 @@ int usb_gadget_register_driver_owner(struct usb_gadget_driver *driver,
 	driver->driver.bus = &gadget_bus_type;
 	driver->driver.owner = owner;
 	driver->driver.mod_name = mod_name;
+	driver->driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
 	ret = driver_register(&driver->driver);
 	if (ret) {
 		pr_warn("%s: driver registration failed: %d\n",
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 91dccd25a55142..7e538194a0a4e2 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -79,6 +79,7 @@
 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI		0x1142
 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI			0x1242
 #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI			0x2142
+#define PCI_DEVICE_ID_ASMEDIA_3042_XHCI			0x3042
 #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI			0x3242
 
 #define PCI_DEVICE_ID_CADENCE				0x17CD
@@ -451,6 +452,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
 		xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
 
+	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+	    pdev->device == PCI_DEVICE_ID_ASMEDIA_3042_XHCI)
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+
 	if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
 		xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
 
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 50b86d531701de..6497c4e81e951a 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -331,3 +331,15 @@ config USB_ONBOARD_DEV
 	  this config will enable the driver and it will automatically
 	  match the state of the USB subsystem. If this driver is a
 	  module it will be called onboard_usb_dev.
+
+config USB_ONBOARD_DEV_USB5744
+	bool "Onboard USB Microchip usb5744 hub with SMBus support"
+	depends on (USB_ONBOARD_DEV && I2C=y) || (USB_ONBOARD_DEV=m && I2C=m)
+	help
+	  Say Y here if you want to support onboard USB Microchip usb5744
+	  hub that requires SMBus initialization.
+
+	  This options enables usb5744 i2c default initialization sequence
+	  during hub start-up configuration stage. It is must to enable this
+	  option on AMD Kria KR260 Robotics Starter Kit as this hub is
+	  connected to USB-SD converter which mounts the root filesystem.
diff --git a/drivers/usb/misc/onboard_usb_dev.c b/drivers/usb/misc/onboard_usb_dev.c
index 560591e02d6a4e..75dfdca04ff1c2 100644
--- a/drivers/usb/misc/onboard_usb_dev.c
+++ b/drivers/usb/misc/onboard_usb_dev.c
@@ -311,7 +311,7 @@ static void onboard_dev_attach_usb_driver(struct work_struct *work)
 
 static int onboard_dev_5744_i2c_init(struct i2c_client *client)
 {
-#if IS_ENABLED(CONFIG_I2C)
+#if IS_ENABLED(CONFIG_USB_ONBOARD_DEV_USB5744)
 	struct device *dev = &client->dev;
 	int ret;
 
@@ -394,9 +394,11 @@ static int onboard_dev_probe(struct platform_device *pdev)
 
 	i2c_node = of_parse_phandle(pdev->dev.of_node, "i2c-bus", 0);
 	if (i2c_node) {
-		struct i2c_client *client;
+		struct i2c_client *client = NULL;
 
+#if IS_ENABLED(CONFIG_USB_ONBOARD_DEV_USB5744)
 		client = of_find_i2c_device_by_node(i2c_node);
+#endif
 		of_node_put(i2c_node);
 
 		if (!client) {
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 4a9859e03f6b4c..6aebc736a80c66 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -34,8 +34,6 @@
 #define YUREX_BUF_SIZE		8
 #define YUREX_WRITE_TIMEOUT	(HZ*2)
 
-#define MAX_S64_STRLEN 20 /* {-}922337203685477580{7,8} */
-
 /* table of devices that work with this driver */
 static struct usb_device_id yurex_table[] = {
 	{ USB_DEVICE(YUREX_VENDOR_ID, YUREX_PRODUCT_ID) },
@@ -402,8 +400,9 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count,
 			  loff_t *ppos)
 {
 	struct usb_yurex *dev;
-	int len = 0;
-	char in_buffer[MAX_S64_STRLEN];
+	int len;
+	char in_buffer[20];
+	unsigned long flags;
 
 	dev = file->private_data;
 
@@ -413,16 +412,14 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count,
 		return -ENODEV;
 	}
 
-	if (WARN_ON_ONCE(dev->bbu > S64_MAX || dev->bbu < S64_MIN)) {
-		mutex_unlock(&dev->io_mutex);
-		return -EIO;
-	}
-
-	spin_lock_irq(&dev->lock);
-	scnprintf(in_buffer, MAX_S64_STRLEN, "%lld\n", dev->bbu);
-	spin_unlock_irq(&dev->lock);
+	spin_lock_irqsave(&dev->lock, flags);
+	len = snprintf(in_buffer, 20, "%lld\n", dev->bbu);
+	spin_unlock_irqrestore(&dev->lock, flags);
 	mutex_unlock(&dev->io_mutex);
 
+	if (WARN_ON_ONCE(len >= sizeof(in_buffer)))
+		return -EIO;
+
 	return simple_read_from_buffer(buffer, count, ppos, in_buffer, len);
 }
 
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index fd68204374f2ce..e5ad23d86833d5 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2423,6 +2423,17 @@ UNUSUAL_DEV(  0xc251, 0x4003, 0x0100, 0x0100,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NOT_LOCKABLE),
 
+/*
+ * Reported by Icenowy Zheng <uwu@icenowy.me>
+ * This is an interface for vendor-specific cryptic commands instead
+ * of real USB storage device.
+ */
+UNUSUAL_DEV(  0xe5b7, 0x0811, 0x0100, 0x0100,
+		"ZhuHai JieLi Technology",
+		"JieLi BR21",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_DEVICE),
+
 /* Reported by Andrew Simmons <andrew.simmons@gmail.com> */
 UNUSUAL_DEV(  0xed06, 0x4500, 0x0001, 0x0001,
 		"DataStor",
diff --git a/net/9p/Kconfig b/net/9p/Kconfig
index 63f988f0c9e8e7..ee967fd25312cb 100644
--- a/net/9p/Kconfig
+++ b/net/9p/Kconfig
@@ -43,6 +43,8 @@ config NET_9P_XEN
 config NET_9P_USBG
 	bool "9P USB Gadget Transport"
 	depends on USB_GADGET=y || USB_GADGET=NET_9P
+	select CONFIGFS_FS
+	select USB_LIBCOMPOSITE
 	help
 	  This builds support for a transport for 9pfs over
 	  usb gadget.