README.md

Garo Wallbox (EVSE) - HomeAssistant Integration

This is a custom component to allow control of Garo Wallboxes in HomeAssistant.

Support Development

• ☕  Buy me a coffee

Installation

Install using HACS (recomended)

If you do not have HACS installed yet visit https://hacs.xyz for installation instructions. In HACS go to the Integrations section hit the big + at the bottom right and search for Garo Wallbox.

Install manually

Clone or copy this repository and copy the folder 'custom_components/garo_wallbox' into '/custom_components/garo_wallbox'

Configuration

Once installed the Garo Wallbox integration can be configured via the Home Assistant integration interface where you can enter the IP address of the device.

Services

Set the mode of the EVSE

Service: garo_wallbox.set_mode

Parameter	Description	Example
entity_id	Name of the entity to change	sensor.garage_charger
mode	The new mode available modes: On, Off, Schema	On

Set the charge limit

Service: garo_wallbox.set_current_limit

Parameter	Description	Example
entity_id	Name of the entity to change	sensor.garage_charger
limit	The new limit in Ampare	10