Zonestar.ini

# Zonestar print profiles

# based on https://github.com/slic3r/slic3r-profiles/pull/19 by @ZONESTAR3D and the prusaslicer one

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Zonestar
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.2
# Where to get the updates from?
config_update_url = 
# https://github.com/ZONESTAR3D/Slicing-Guide/tree/master/PrusaSlicer/Profiles

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:Z5]
name = Zonestar Z5
variants = 0.4
technology = FFF
bed_model = bed_220.stl
bed_texture = 220_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar

[printer_model:Z6]
name = Zonestar Z6
variants = 0.4
technology = FFF
bed_model = bed_150.stl
bed_texture = 150_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar

[printer_model:Z5X]
name = Zonestar Z5X
variants = 0.4
technology = FFF
bed_model = bed_310.stl
bed_texture = 310_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar

[printer_model:Z8]
name = Zonestar Z8
variants = 0.4
technology = FFF
bed_model = bed_310.stl
bed_texture = 310_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar

[printer_model:Z9]
name = Zonestar Z9
variants = 0.4
technology = FFF
bed_model = bed_310.stl
bed_texture = 310_texture.svg
default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar

###################
####   print   ####
###################

[print:*common*]
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 4
bottom_solid_min_thickness = 0
bridge_acceleration = 0
bridge_angle = 0
bridge_flow_ratio = 100%
bridge_speed = 60
brim_separation = 0
brim_width = 4
clip_multipart_objects = 1
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.45
extrusion_spacing =
perimeter_extrusion_spacing =
external_perimeter_extrusion_spacing =
first_layer_extrusion_spacing =
infill_extrusion_spacing =
solid_infill_extrusion_spacing =
top_infill_extrusion_spacing =
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_acceleration = 0
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.45
first_layer_height = 0.3
first_layer_speed = 15
first_layer_min_speed = 0
first_layer_infill_speed = 100%
first_layer_speed_over_raft = 25
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 20
gcode_comments = 0
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions = 
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
inherits = 
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 0
mmu_segmented_region_max_width = 0
notes = 
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {printer_model}_{input_filename_base}.gcode
overhangs_width_speed = 75%
overhangs_width = 75%
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 50
perimeters = 3
post_process = 
print_settings_id = 
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0.0125
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 6
skirt_height = 1
skirts = 0
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 15
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 20
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.35
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
bridge_type = nozzle
bridge_overlap_min = 80%
bridge_overlap = 95%
thin_walls = 0
threads = 4
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 15
top_solid_layers = 5
top_solid_min_thickness = 0
travel_speed = 100
travel_speed_z = 0
wipe_tower = 0
xy_size_compensation = 0
compatible_printers_condition = nozzle_diameter[0]==0.4 and num_extruders==1

[print:0.20mm @Zonestar MULTI]
inherits = *common*
wipe_tower = 1
wipe_tower_x = 125
wipe_tower_y = 195
compatible_printers_condition = nozzle_diameter[0]==0.4 and num_extruders>1


[print:0.20mm @Zonestar SINGLE]
inherits = *common*

###################
#### filament  ####
###################
[filament:Generic ABS @Zonestar]
bed_temperature = 100
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_minimal_purge_on_wipe_tower = 50
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_type = ABS
filament_unloading_speed = 40
filament_unloading_speed_start = 60
filament_vendor = Generic
first_layer_bed_temperature = 100
first_layer_temperature = 245
max_fan_speed = 0
min_fan_speed = 0
min_print_speed = 15
slowdown_below_layer_time = 25
temperature = 245

[filament:Generic PETG @Zonestar]
bed_temperature = 70
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_diameter = 1.75
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 50
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_type = PETG
filament_unloading_speed = 40
filament_unloading_speed_start = 60
filament_vendor = Generic
first_layer_bed_temperature = 70
first_layer_temperature = 210
full_fan_speed_layer = 0
max_fan_speed = 100
min_fan_speed = 50
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; Filament gcode\n"
temperature = 210

[filament:Generic PLA @Zonestar]
bed_temperature = 60
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 50
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_toolchange_delay = 0
filament_type = PLA
filament_unloading_speed = 40
filament_unloading_speed_start = 60
filament_vendor = Generic
filament_wipe = nil
first_layer_bed_temperature = 60
first_layer_temperature = 200
full_fan_speed_layer = 5
max_fan_speed = 100
min_fan_speed = 50
min_print_speed = 10
slowdown_below_layer_time = 5
temperature = 200

[filament:Generic TPU @Zonestar]
bed_temperature = 50
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_diameter = 1.75
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 3
filament_minimal_purge_on_wipe_tower = 50
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_toolchange_delay = 0
filament_type = FLEX
filament_unloading_speed = 30
filament_unloading_speed_start = 30
filament_vendor = Generic
first_layer_bed_temperature = 50
first_layer_temperature = 225
full_fan_speed_layer = 0
max_fan_speed = 100
min_fan_speed = 50
min_print_speed = 10
slowdown_below_layer_time = 5
temperature = 225

###################
####  printer  ####
###################
[printer:*common*]
printer_technology = FFF
before_layer_gcode = 
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_retraction = 35
default_filament_profile = 
default_print_profile = 
deretract_speed = 
end_gcode = 
extra_loading_move = -2
gcode_flavor = marlin2
high_current_on_filament_swap = 0
host_type = octoprint
layer_gcode = 
machine_limits_usage = ignore
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 1500
machine_max_acceleration_retracting = 1500
machine_max_acceleration_travel = 1500
machine_max_acceleration_x = 9000
machine_max_acceleration_y = 9000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 0.2
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_layer_height = 0.3
min_layer_height = 0.1
nozzle_diameter = 0.4
pause_print_gcode = 
remaining_times = 0
retract_speed = 40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 0
wipe = 0
z_offset = 0

[printer:Zonestar Z5+M2 HOTEND]
inherits = *common*
printer_model = Z5
printer_variant = 0.4
bed_shape = 0x0,220x0,220x220,0x220
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar MULTI
deretract_speed = 30,30
before_layer_gcode = G92 E0
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #FF0000;#00FF00
extruder_offset = 0x0,0x0
max_layer_height = 0.3,0.3
max_print_height = 220
min_layer_height = 0.15,0.15
nozzle_diameter = 0.4,0.4
retract_before_travel = 6,6
retract_before_wipe = 50%,50%
retract_layer_change = 0,0
retract_length = 10,10
retract_length_toolchange = 0,0
retract_lift = 0.5,0.5
retract_lift_above = 0,0
retract_lift_below = 0,0
retract_restart_extra = 0,0
retract_restart_extra_toolchange = 0,0
retract_speed = 30,30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 1
wipe = 1,1


[printer:Zonestar Z6]
inherits = *common*
printer_model = Z6
printer_variant = 0.4
bed_shape = 0x0,150x0,150x150,0x150
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar SINGLE
deretract_speed = 30
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #00FF00
extruder_offset = 0x0
min_layer_height = 0.1
max_layer_height = 0.3
max_print_height = 150
nozzle_diameter = 0.4
retract_before_travel = 2
retract_before_wipe = 30%
retract_layer_change = 0
retract_length = 8
retract_length_toolchange = 0
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y100 E8 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 0
wipe = 1

[printer:Zonestar Z5X]
inherits = *common*
printer_model = Z5X
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar SINGLE
deretract_speed = 30
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #00FF00
extruder_offset = 0x0
min_layer_height = 0.1
max_layer_height = 0.3
max_print_height = 400
nozzle_diameter = 0.4
retract_before_travel = 2
retract_before_wipe = 30%
retract_layer_change = 0
retract_length = 8
retract_length_toolchange = 0
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 0
wipe = 1

#Z8 with different types of hotend
[printer:Zonestar Z8+M3 HOTEND]
inherits = *common*
printer_model = Z8
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar MULTI
deretract_speed = 30,30,30
before_layer_gcode = G92 E0
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #FF0000;#00FF00;#0000FF
extruder_offset = 0x0,0x0,0x0
max_layer_height = 0.3,0.3,0.3
max_print_height = 400
min_layer_height = 0.15,0.15,0.15
nozzle_diameter = 0.4,0.4,0.4
retract_before_travel = 6,6,6
retract_before_wipe = 50%,50%,50%
retract_layer_change = 0,0,0
retract_length = 12,12,12
retract_length_toolchange = 0,0,0
retract_lift = 0.5,0.5,0.5
retract_lift_above = 0,0,0
retract_lift_below = 0,0,0
retract_restart_extra = 0,0,0
retract_restart_extra_toolchange = 0,0,0
retract_speed = 30,30,30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 1
wipe = 1,1,1
layer_gcode = G92 E0

[printer:Zonestar Z8+M4 HOTEND]
inherits = *common*
printer_model = Z8
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar MULTI
deretract_speed = 30,30,30,30
before_layer_gcode = G92 E0
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
extruder_offset = 0x0,0x0,0x0,0x0
max_layer_height = 0.3,0.3,0.3,0.3
max_print_height = 400
min_layer_height = 0.15,0.15,0.15,0.15
nozzle_diameter = 0.4,0.4,0.4,0.4
retract_before_travel = 8,8,8,8
retract_before_wipe = 50%,50%,50%,50%
retract_layer_change = 0,0,0,0
retract_length = 12,12,12,12
retract_length_toolchange = 0,0,0,0
retract_lift = 0.5,0.5,0.5,0.5
retract_lift_above = 0,0,0,0
retract_lift_below = 0,0,0,0
retract_restart_extra = 0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0
retract_speed = 30,30,30,30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 1
wipe = 1,1,1,1
layer_gcode = G92 E0

[printer:Zonestar Z8+E4 HOTEND]
inherits = *common*
printer_model = Z8
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar MULTI
deretract_speed = 30,30,30,30
before_layer_gcode = G92 E0
end_gcode = G92 E0\nG1 E-45 F2100 ;pull out filament\nG28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
extruder_offset = 0x0,0x0,0x0,0x0
max_layer_height = 0.3,0.3,0.3,0.3
max_print_height = 400
min_layer_height = 0.1,0.1,0.1,0.1
nozzle_diameter = 0.4,0.4,0.4,0.4
retract_before_travel = 4,4,4,4
retract_before_wipe = 30%,30%,30%,30%
retract_layer_change = 0,0,0,0
retract_length = 8,8,8,8
retract_length_toolchange = 0,0,0,0
retract_lift = 0.5,0.5,0.5,0.5
retract_lift_above = 0,0,0,0
retract_lift_below = 0,0,0,0
retract_restart_extra = 0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
retract_speed = 30,30,30,30
toolchange_gcode = G92 E0\nG1 E-5 F1200;pull filament-1\nG92 E0\nG1 E-75 F2400;pull filament-2\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E25 F2400; push filament-1\nG92 E0\nG1 E20 F1200; pushfilament-2\nG92 E0\nG1 E30 F1800; pushfilament-2\nG92 E0\nG1 E4 F600; push filament-3\nG92 E0
use_relative_e_distances = 1
wipe = 1,1,1,1
layer_gcode = G92 E0

[printer:Zonestar Z8+DDE]
inherits = *common*
printer_model = Z8
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic TPU @Zonestar
default_print_profile = 0.20mm @Zonestar SINGLE
deretract_speed = 30
end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #00FF00
extruder_offset = 0x0
max_layer_height = 0.3
max_print_height = 400
min_layer_height = 0.1
nozzle_diameter = 0.4
retract_before_travel = 2
retract_before_wipe = 30%
retract_layer_change = 0
retract_length = 8
retract_length_toolchange = 0
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 0
wipe = 1

[printer:Zonestar Z8+One Color]
inherits = *common*
printer_model = Z8
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar SINGLE
deretract_speed = 30
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #00FF00
extruder_offset = 0x0
max_layer_height = 0.3
max_print_height = 400
min_layer_height = 0.1
nozzle_diameter = 0.4
retract_before_travel = 4
retract_before_wipe = 50%
retract_layer_change = 0
retract_length = 12
retract_length_toolchange = 0
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\n;prime nozzle on the side of hotbed\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 0
wipe = 1

#Z9 with different types of hotend
[printer:Zonestar Z9+M3 HOTEND]
inherits = *common*
printer_model = Z9
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar MULTI
deretract_speed = 30,30,30
before_layer_gcode = G92 E0
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #FF0000;#00FF00;#0000FF
extruder_offset = 0x0,0x0,0x0
max_layer_height = 0.3,0.3,0.3
max_print_height = 400
min_layer_height = 0.15,0.15,0.15
nozzle_diameter = 0.4,0.4,0.4
retract_before_travel = 6,6,6
retract_before_wipe = 50%,50%,50%
retract_layer_change = 0,0,0
retract_length = 12,12,12
retract_length_toolchange = 0,0,0
retract_lift = 0.5,0.5,0.5
retract_lift_above = 0,0,0
retract_lift_below = 0,0,0
retract_restart_extra = 0,0,0
retract_restart_extra_toolchange = 0,0,0
retract_speed = 30,30,30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 1
wipe = 1,1,1
layer_gcode = G92 E0

[printer:Zonestar Z9+M4 HOTEND]
inherits = *common*
printer_model = Z9
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar MULTI
deretract_speed = 30,30,30,30
before_layer_gcode = G92 E0
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
extruder_offset = 0x0,0x0,0x0,0x0
max_layer_height = 0.3,0.3,0.3,0.3
max_print_height = 400
min_layer_height = 0.15,0.15,0.15,0.15
nozzle_diameter = 0.4,0.4,0.4,0.4
retract_before_travel = 8,8,8,8
retract_before_wipe = 50%,50%,50%,50%
retract_layer_change = 0,0,0,0
retract_length = 12,12,12,12
retract_length_toolchange = 0,0,0,0
retract_lift = 0.5,0.5,0.5,0.5
retract_lift_above = 0,0,0,0
retract_lift_below = 0,0,0,0
retract_restart_extra = 0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0
retract_speed = 30,30,30,30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 1
wipe = 1,1,1,1
layer_gcode = G92 E0

[printer:Zonestar Z9+E4 HOTEND]
inherits = *common*
printer_model = Z9
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar MULTI
deretract_speed = 30,30,30,30
before_layer_gcode = G92 E0
end_gcode = G92 E0\nG1 E-45 F2100 ;pull out filament\nG28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
extruder_offset = 0x0,0x0,0x0,0x0
max_layer_height = 0.3,0.3,0.3,0.3
max_print_height = 400
min_layer_height = 0.1,0.1,0.1,0.1
nozzle_diameter = 0.4,0.4,0.4,0.4
retract_before_travel = 4,4,4,4
retract_before_wipe = 30%,30%,30%,30%
retract_layer_change = 0,0,0,0
retract_length = 8,8,8,8
retract_length_toolchange = 0,0,0,0
retract_lift = 0.5,0.5,0.5,0.5
retract_lift_above = 0,0,0,0
retract_lift_below = 0,0,0,0
retract_restart_extra = 0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0
retract_speed = 30,30,30,30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime start point\nG1 Z0.3 F3000 ; get ready to prime\n;===Pre-load filament start\nM117 Preload Extruder #1\nT0\nG0 X5 Y50 F3000\nG1 Y250 E15 F1200\nG0 X5.5 F3000\nG1 Y50 E15 F1200\nG0 X6 F3000\nG1 Y250 E15 F1200\nG0 X6.5 F3000\nG1 Y50 E15 F1200\nG0 X7 F3000\nG1 Y250 E15 F1200\nG0 X7.5 F3000\nG1 Y50 E15 F1200\nG0 X8 F3000\nG1 E-80 F2400\nM400\nM117 Preload Extruder #2\nT1\nG0 X8 Y50 F3000\nG1 Y250 E15 F1200\nG0 X8.5 F3000\nG1 Y50 E15 F1200\nG0 X9 F3000\nG1 Y250 E15 F1200\nG0 X9.5 F3000\nG1 Y50 E15 F1200\nG0 X10 F3000\nG1 Y250 E15 F1200\nG0 X10.5 F3000\nG1 Y50 E15 F1200\nG0 X11 F3000\nG1 E-80 F2400\nM400\nM117 Preload Extruder #3\nT2\nG0 X11 Y50 F3000\nG1 Y250 E15 F1200\nG0 X11.5 F3000\nG1 Y50 E15 F1200\nG0 X12 F3000\nG1 Y250 E15 F1200\nG0 X12.5 F3000\nG1 Y50 E15 F600\nG0 X13 F3000\nG1 Y250 E15 F1200\nG0 X13.5 F3000\nG1 Y50 E15 F1200\nG0 X14 F3000\nG1 E-80 F2400\nM400\nM117 Preload Extruder #3\nT3\nG0 X14 Y50 F3000\nG1 Y250 E15 F1200\nG0 X14.5 F3000\nG1 Y50 E15 F1200\nG0 X15 F3000\nG1 Y250 E15 F1200\nG0 X15.5 F3000\nG1 Y50 E15 F1200\nG0 X16 F3000\nG1 Y250 E15 F1200\nG0 X16.5 F3000\nG1 Y50 E15 F1200\nG0 X17 F3000\nG0 Y155 F4800\n;===Pre-load filament end
toolchange_gcode = G92 E0\nG1 E-5 F1200;pull filament-1\nG92 E0\nG1 E-75 F2400;pull filament-2\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E25 F2400; push filament-1\nG92 E0\nG1 E20 F1200; pushfilament-2\nG92 E0\nG1 E30 F1800; pushfilament-2\nG92 E0\nG1 E4 F600; push filament-3\nG92 E0
use_relative_e_distances = 1
wipe = 1,1,1,1
layer_gcode = G92 E0

[printer:Zonestar Z9+DDE]
inherits = *common*
printer_model = Z9
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic TPU @Zonestar
default_print_profile = 0.20mm @Zonestar SINGLE
deretract_speed = 30
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #00FF00
extruder_offset = 0x0
max_layer_height = 0.3
max_print_height = 400
min_layer_height = 0.1
nozzle_diameter = 0.4
retract_before_travel = 2
retract_before_wipe = 30%
retract_layer_change = 0
retract_length = 8
retract_length_toolchange = 0
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 0
wipe = 1

[printer:Zonestar Z9+One Color]
inherits = *common*
printer_model = Z9
printer_variant = 0.4
bed_shape = 0x0,310x0,310x310,0x310
default_filament_profile = Generic PLA @Zonestar
default_print_profile = 0.20mm @Zonestar SINGLE
deretract_speed = 30
end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
extruder_colour = #00FF00
extruder_offset = 0x0
max_layer_height = 0.3
max_print_height = 400
min_layer_height = 0.1
nozzle_diameter = 0.4
retract_before_travel = 4
retract_before_wipe = 50%
retract_layer_change = 0
retract_length = 12
retract_length_toolchange = 0
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\n;prime nozzle on the side of hotbed\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
use_relative_e_distances = 0
wipe = 1