Volume up and down commands get lost after restart

[mikosoft83]

I configured up and down commands, I got the switches, they worked. Then I turned off my computer,, turned it on again and both MQTT switches stopped working and in the Command list on the computer they are gone. This happened on two computers already (both different hardware wise).

[sleevezipper]

Hi! Thanks for creating an issue. Can you still find the commands in the config files?

[blackice1580]

I can confirm that the commands are still in the "configured-commands.json" when this happens

[Drumada]

I am running into the same issue, but it seems to apply to any media related commands at all. When I check configured-commands.json, any of my media related commands are missing. At first I thought I was inputting them incorrectly or somehow forgetting to save them as I lost them on a few different reboots. However I can easily re-create this by doing the following:

Adding a media related command to HASS Workstation
Verifying it appears in Home Assistant (and is functional)
Killing hass-workstation-service.exe from task manager
Restarting Hass Workstation Service

The missing commands are still present in Home Assistant as switches with no easy way to delete them, but I assume this is an issue with HA and MQTT discovery and is not related to Hass Workstation. I only figured id mention it to help paint a complete picture of its behavior.

[dennis84de]

I'm having the same problem. The configurations for the media commands dispear when the service is started. I also tested this with killing the process and starting it again.

For now I added Key-commands for the switches I use (Mute and PlayPause).

[sleevezipper]

Hi! Thanks for creating an issue. I messed something up somewhere. It's working again and will be in the next release (which will be today).