Skip to content

Latest commit

 

History

History
59 lines (45 loc) · 5.88 KB

documentation.md

File metadata and controls

59 lines (45 loc) · 5.88 KB
Raw

Documentation

This guide explains the arguments of the program's command. You can always type --help or -h to see the arguments.

Application modes

DeepVOG works with four modes (fit, infer, table, tui). You can only specify EXACTLY one mode by using one of the below arguments. Program will not proceed if more than one arguments from belows is entered.

  • --fit: Fit an eyeball model from a video. It accept two arguments. (1) Path of the video of which you want to fit an eyeball model. (2) Path of the .json file that you want to save your fitted model.
  • --infer: Infer gaze directions from a video based on a fitted eyeball model. It accepts three arguments. (1) Path of the video of which you want to infer the gaze direction. (2) Path of the .json file of which you stored your fitted eyeball model previously with --fit argument. (3) Path of the gaze results that you want to save.
  • --table: Fit or infer videos from a csv file. It accepts one argument (1) Path of the csv file. The content of csv file must follow a format, see section Input/output format.

Camera intrinsic parameters and others

Although the default camera intrinsic parameters are given, they vary largely across different cameras. it is very important that you specify the correct values according to the camera that you used to record the videos, otherwise the gaze results would be different. The camera intrinsic parameters can be found in their production manual which is usually available online in the provider's website.

  • -f or --flen: Focal length of your camera in mm. Default: 6.
  • -g or --gpu: GPU device number. Default: 0.
  • -vs or --vidshape: Original and uncropped video shape of your camera output, height and width in pixel. Default: (240,320).
  • -s or --sensor: Sensor size of your camera digital sensor, height and width in mm. Default: (3.6,4.8).
  • -b or --batchsize: Batch size of video frames for gaze inference. It is recommended to be at least 32. Default: 512.
  • -v or --visualize: Path of the video you want to store your visualization. Default: "" (no visualization to save). This function is not yet available with --table mode.
  • -m or --heatmap: Showing heatmap in the saved visualization video. This function is not yet available with --table mode.
  • --skip_existed: Flag for skipping the operation in --table mode if the output file already exists. No argument is accepted.
  • --skip_errors: Flag for skipping the operation in --table mode and continue the next video if error is encountered. No argument is accepted.
  • --log_errors: Path that stores your logged error messages when you skip the error by --skip_errors in --table mode.
  • --no_gaze: Flag for enabling only pupil segmentation in infer mode, without gaze estimation. In this mode, eyeball model path will be ignored (model fitting is not needed). Output result will not contain any gaze information but pupil centre coordinates. No argument is accepted.

Input/output format

CSV table

With --table argument, you enter the "table" mode of DeepVOG, that you can batch fit/infer multiple videos without giving command one by one. The CSV table must follow the format below:

    operation, fit_vid,             infer_vid,              eyeball_model,      result,                   with_gaze
    fit      , /PATH/fit_vid1.mp4,  /PATH/infer_vid1.mp4,   /PATH/model1.json,  /PATH/output_result1.csv, 0
    infer    , /PATH/fit_vid2.mp4,  /PATH/infer_vid2.mp4,   /PATH/model2.json,  /PATH/output_result2.csv, 1
    both     , /PATH/fit_vid3.mp4,  /PATH/infer_vid3.mp4,   /PATH/model3.json,  /PATH/output_result3.csv, 0
    fit      , /PATH/fit_vid4.mp4,  /PATH/infer_vid4.mp4,   /PATH/model4.json,  /PATH/output_result4.csv, 1
    ...
  1. Delimitor is comma. Leading/trailing spaces do not matter since they will be ignored.
  2. The column titles must follow the same order and texts as above, i.e. operation, fit_vid, infer_vid, eyeball_model, result.
  3. In the operation column, it contains three options fit, infer or both.
    • fit: Fit eyeball model from the video specified in fit_vid, and save the model to the path specified in eyeball_model. Columns infer_vid and result will be ignored.
    • infer: Load the eyeball model from the path specified in eyeball_model, infer the gaze from the video specified in infer_vid and save the gaze estimation results to the path specified in result. Column fit_vid will be ignored.
    • both: First calling fit operation, then calling infer. Equivalent to having fit and infer operations separately in two rows.
  4. In the with_gaze column, you can input either 0 or 1 for infer operation. For fit operation, the value will be ignored. 1 means enabling gaze estimation, requiring fitting an eyeball model from the path in eyeball_model column. 0 means disabling gaze estimation and performing only pupil segmentations. Paths in eyeball_model column will be ignored.

Output results

Gaze estimation result is saved in a .csv file, which contains the following information:

  1. Pupil centre coordinates on the 2D image plane (pupil2D_x, pupil2D_y) in pixel.

  2. Angular eye movement in horizontal/yaw (gaze_x) and in vertical/pitch (gaze_y) in degree.

  3. Pupil segmentation confidence: The higher the value, the more confidence the result is. Recommended threshold > 0.96 for high accuracy.

  4. Consistence: Whether "Consistent Pupil Estimate" is applied during the gaze estimation, a feature from Swirski and Dodgson (2013). 1 means the eyeball model is used to estimate the gaze, 0 means the gaze direction is obtained by pure unprojection (which is unreliable). It is recommended to filter out gaze direction estimates that has consistence equal to 0.

As a result, your .csv output will store 6 columns of data: pupil2D_x, pupil2D_y, gaze_x, gaze_y, confidence, consistence