Updates en/README.md

Auto commit by GitBook Editor

Author: Anonymous

en/README.md

@@ -6,8 +6,8 @@
 
 **Key Features:**
 
-* Full setup/configuration of ArduPilot and PX4 Pro powered vehicles.
-* Flight support for vehicles running PX4 and ArduPilot (or any other autopilot that communicates using the MAVLink protocol).
+* Full setup/configuration.
+* Flight support.
 * Mission planning for autonomous flight.
 * Flight map display showing vehicle position, flight track, waypoints and vehicle instruments.
 * Video streaming with instrument display overlays.

en/getting_started/quick_start.md

@@ -1,22 +1,23 @@
 # QGroundControl Quick Start
 
-Getting *QGroundControl* up and running is quick and easy:
+Getting _QGroundControl_ up and running is quick and easy:
 
 1. [Download and install](../getting_started/download_and_install.md) the application.
-1. Start *QGroundControl*. 
-1. Attach your vehicle to the ground station device via USB, through a telemetry radio, or over WiFi. *QGroundControl* should detect your vehicle and connect to it automatically.
+2. Start _QGroundControl_. 
+3. Attach your vehicle to the ground  device via USB, through a telemetry radio, or over WiFi. _QGroundControl_ should detect your vehicle and connect to it automatically.
 
-That's it! If the vehicle is ready to fly,  *QGroundControl* should display [Fly View](../FlyView/FlyView.md) as shown below (otherwise it will open [Setup View](../SetupView/SetupView.md)).
+That's it! If the vehicle is ready to fly,  _QGroundControl_ should display [Fly View](../FlyView/FlyView.md) as shown below \(otherwise it will open [Setup View](../SetupView/SetupView.md)\).
 
 ![](../../images/quickstart/fly_view_connected_vehicle.jpg)
 
-A good way to become familiar with *QGroundControl* is to start experimenting:
+A good way to become familiar with _QGroundControl_ is to start experimenting:
 
-- Use the [toolbar](../toolbar/toolbar.md) to switch between the main views:
-  - [Settings](../SettingsView/SettingsView.md): Configure the *QGroundControl* application.
-  - [Setup](../SetupView/SetupView.md): Configure and tune your vehicle.
-  - [Plan](../PlanView/PlanView.md): Create autonomous missions.
-  - [Fly](../FlyView/FlyView.md): Monitor you vehicle(s) while flying, including streaming video.
-- Click the *Status icons* on the toolbar to find out the status of the connected vehicle. 
+* Use the [toolbar](../toolbar/toolbar.md) to switch between the main views:
+  * [Settings](../SettingsView/SettingsView.md): Configure the _QGroundControl_ application.
+  * [Setup](../SetupView/SetupView.md): Configure and tune your vehicle.
+  * [Plan](../PlanView/PlanView.md): Create autonomous missions.
+  * [Fly](../FlyView/FlyView.md): Monitor you vehicle\(s\) while flying, including streaming video.
+* Click the _Status icons_ on the toolbar to find out the status of the connected vehicle. 
 
 While the UI is fairly intuitive, this documentation can also be referenced to find out more.
+