Auto merge of #132746 - flip1995:clippy-subtree-update, r=Manishearth

Clippy subtree update

r? `@Manishearth`

Cargo.lock

@@ -2861,7 +2861,6 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "679341d22c78c6c649893cbd6c3278dcbe9fc4faa62fea3a9296ae2b50c14625"
 dependencies = [
  "bitflags 2.6.0",
- "getopts",
  "memchr",
  "pulldown-cmark-escape 0.11.0",
  "unicase",

src/tools/clippy/.github/workflows/clippy_dev.yml

@@ -1,17 +1,8 @@
 name: Clippy Dev Test
 
 on:
-  push:
-    branches:
-      - auto
-      - try
+  merge_group:
   pull_request:
-    # Only run on paths, that get checked by the clippy_dev tool
-    paths:
-    - 'CHANGELOG.md'
-    - 'README.md'
-    - '**.stderr'
-    - '**.rs'
 
 env:
   RUST_BACKTRACE: 1
@@ -47,28 +38,21 @@ jobs:
         cargo check
         git reset --hard HEAD
 
-  # These jobs doesn't actually test anything, but they're only used to tell
-  # bors the build completed, as there is no practical way to detect when a
-  # workflow is successful listening to webhooks only.
-  #
-  # ALL THE PREVIOUS JOBS NEED TO BE ADDED TO THE `needs` SECTION OF THIS JOB!
-
-  end-success:
-    name: bors dev test finished
-    if: github.event.pusher.name == 'bors' && success()
-    runs-on: ubuntu-latest
-    needs: [clippy_dev]
-
-    steps:
-      - name: Mark the job as successful
-        run: exit 0
-
-  end-failure:
-    name: bors dev test finished
-    if: github.event.pusher.name == 'bors' && (failure() || cancelled())
+  conclusion_dev:
+    needs: [ clippy_dev ]
+    # We need to ensure this job does *not* get skipped if its dependencies fail,
+    # because a skipped job is considered a success by GitHub. So we have to
+    # overwrite `if:`. We use `!cancelled()` to ensure the job does still not get run
+    # when the workflow is canceled manually.
+    #
+    # ALL THE PREVIOUS JOBS NEED TO BE ADDED TO THE `needs` SECTION OF THIS JOB!
+    if: ${{ !cancelled() }}
     runs-on: ubuntu-latest
-    needs: [clippy_dev]
-
     steps:
-      - name: Mark the job as a failure
-        run: exit 1
+      # Manually check the status of all dependencies. `if: failure()` does not work.
+      - name: Conclusion
+        run: |
+          # Print the dependent jobs to see them in the CI log
+          jq -C <<< '${{ toJson(needs) }}'
+          # Check if all jobs that we depend on (in the needs array) were successful.
+          jq --exit-status 'all(.result == "success")' <<< '${{ toJson(needs) }}'

src/tools/clippy/.github/workflows/clippy_bors.yml → src/tools/clippy/.github/workflows/clippy_mq.yml

@@ -1,10 +1,7 @@
-name: Clippy Test (bors)
+name: Clippy Test (merge queue)
 
 on:
-  push:
-    branches:
-      - auto
-      - try
+  merge_group:
 
 env:
   RUST_BACKTRACE: 1
@@ -13,11 +10,6 @@ env:
   CARGO_INCREMENTAL: 0
   RUSTFLAGS: -D warnings
 
-concurrency:
-  # For a given workflow, if we push to the same branch, cancel all previous builds on that branch.
-  group: "${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}"
-  cancel-in-progress: true
-
 defaults:
   run:
     shell: bash
@@ -218,28 +210,21 @@ jobs:
       env:
         INTEGRATION: ${{ matrix.integration }}
 
-  # These jobs doesn't actually test anything, but they're only used to tell
-  # bors the build completed, as there is no practical way to detect when a
-  # workflow is successful listening to webhooks only.
-  #
-  # ALL THE PREVIOUS JOBS NEED TO BE ADDED TO THE `needs` SECTION OF THIS JOB!
-
-  end-success:
-    name: bors test finished
-    if: github.event.pusher.name == 'bors' && success()
+  conclusion:
+    needs: [ changelog, base, metadata_collection, integration_build, integration ]
+    # We need to ensure this job does *not* get skipped if its dependencies fail,
+    # because a skipped job is considered a success by GitHub. So we have to
+    # overwrite `if:`. We use `!cancelled()` to ensure the job does still not get run
+    # when the workflow is canceled manually.
+    #
+    # ALL THE PREVIOUS JOBS NEED TO BE ADDED TO THE `needs` SECTION OF THIS JOB!
+    if: ${{ !cancelled() }}
     runs-on: ubuntu-latest
-    needs: [changelog, base, metadata_collection, integration_build, integration]
-
-    steps:
-      - name: Mark the job as successful
-        run: exit 0
-
-  end-failure:
-    name: bors test finished
-    if: github.event.pusher.name == 'bors' && (failure() || cancelled())
-    runs-on: ubuntu-latest
-    needs: [changelog, base, metadata_collection, integration_build, integration]
-
     steps:
-      - name: Mark the job as a failure
-        run: exit 1
+      # Manually check the status of all dependencies. `if: failure()` does not work.
+      - name: Conclusion
+        run: |
+          # Print the dependent jobs to see them in the CI log
+          jq -C <<< '${{ toJson(needs) }}'
+          # Check if all jobs that we depend on (in the needs array) were successful.
+          jq --exit-status 'all(.result == "success")' <<< '${{ toJson(needs) }}'

src/tools/clippy/.github/workflows/clippy.yml → src/tools/clippy/.github/workflows/clippy_pr.yml

@@ -1,24 +1,7 @@
 name: Clippy Test
 
 on:
-  push:
-    # Ignore bors branches, since they are covered by `clippy_bors.yml`
-    branches-ignore:
-      - auto
-      - try
-    # Don't run Clippy tests, when only text files were modified
-    paths-ignore:
-    - 'COPYRIGHT'
-    - 'LICENSE-*'
-    - '**.md'
-    - '**.txt'
   pull_request:
-    # Don't run Clippy tests, when only text files were modified
-    paths-ignore:
-    - 'COPYRIGHT'
-    - 'LICENSE-*'
-    - '**.md'
-    - '**.txt'
 
 env:
   RUST_BACKTRACE: 1
@@ -35,7 +18,7 @@ concurrency:
 
 jobs:
   base:
-    # NOTE: If you modify this job, make sure you copy the changes to clippy_bors.yml
+    # NOTE: If you modify this job, make sure you copy the changes to clippy_mq.yml
     runs-on: ubuntu-latest
 
     steps:
@@ -73,3 +56,24 @@ jobs:
       run: .github/driver.sh
       env:
         OS: ${{ runner.os }}
+
+  # We need to have the "conclusion" job also on PR CI, to make it possible
+  # to add PRs to a merge queue.
+  conclusion:
+    needs: [ base ]
+    # We need to ensure this job does *not* get skipped if its dependencies fail,
+    # because a skipped job is considered a success by GitHub. So we have to
+    # overwrite `if:`. We use `!cancelled()` to ensure the job does still not get run
+    # when the workflow is canceled manually.
+    #
+    # ALL THE PREVIOUS JOBS NEED TO BE ADDED TO THE `needs` SECTION OF THIS JOB!
+    if: ${{ !cancelled() }}
+    runs-on: ubuntu-latest
+    steps:
+      # Manually check the status of all dependencies. `if: failure()` does not work.
+      - name: Conclusion
+        run: |
+          # Print the dependent jobs to see them in the CI log
+          jq -C <<< '${{ toJson(needs) }}'
+          # Check if all jobs that we depend on (in the needs array) were successful.
+          jq --exit-status 'all(.result == "success")' <<< '${{ toJson(needs) }}'

src/tools/clippy/.github/workflows/deploy.yml

@@ -52,7 +52,7 @@ jobs:
       run: cargo generate-lockfile
 
     - name: Cache
-      uses: Swatinem/rust-cache@v2.7.0
+      uses: Swatinem/rust-cache@v2
       with:
         save-if: ${{ github.ref == 'refs/heads/master' }}
 

src/tools/clippy/.github/workflows/remark.yml

@@ -1,13 +1,8 @@
 name: Remark
 
 on:
-  push:
-    branches:
-      - auto
-      - try
+  merge_group:
   pull_request:
-    paths:
-    - '**.md'
 
 jobs:
   remark:
@@ -45,28 +40,21 @@ jobs:
     - name: Build mdbook
       run: mdbook build book
 
-  # These jobs doesn't actually test anything, but they're only used to tell
-  # bors the build completed, as there is no practical way to detect when a
-  # workflow is successful listening to webhooks only.
-  #
-  # ALL THE PREVIOUS JOBS NEED TO BE ADDED TO THE `needs` SECTION OF THIS JOB!
-
-  end-success:
-    name: bors remark test finished
-    if: github.event.pusher.name == 'bors' && success()
-    runs-on: ubuntu-latest
-    needs: [remark]
-
-    steps:
-      - name: Mark the job as successful
-        run: exit 0
-
-  end-failure:
-    name: bors remark test finished
-    if: github.event.pusher.name == 'bors' && (failure() || cancelled())
+  conclusion_remark:
+    needs: [ remark ]
+    # We need to ensure this job does *not* get skipped if its dependencies fail,
+    # because a skipped job is considered a success by GitHub. So we have to
+    # overwrite `if:`. We use `!cancelled()` to ensure the job does still not get run
+    # when the workflow is canceled manually.
+    #
+    # ALL THE PREVIOUS JOBS NEED TO BE ADDED TO THE `needs` SECTION OF THIS JOB!
+    if: ${{ !cancelled() }}
     runs-on: ubuntu-latest
-    needs: [remark]
-
     steps:
-      - name: Mark the job as a failure
-        run: exit 1
+      # Manually check the status of all dependencies. `if: failure()` does not work.
+      - name: Conclusion
+        run: |
+          # Print the dependent jobs to see them in the CI log
+          jq -C <<< '${{ toJson(needs) }}'
+          # Check if all jobs that we depend on (in the needs array) were successful.
+          jq --exit-status 'all(.result == "success")' <<< '${{ toJson(needs) }}'

src/tools/clippy/CHANGELOG.md

@@ -5331,6 +5331,7 @@ Released 2018-09-13
 [`almost_complete_range`]: https://rust-lang.github.io/rust-clippy/master/index.html#almost_complete_range
 [`almost_swapped`]: https://rust-lang.github.io/rust-clippy/master/index.html#almost_swapped
 [`approx_constant`]: https://rust-lang.github.io/rust-clippy/master/index.html#approx_constant
+[`arbitrary_source_item_ordering`]: https://rust-lang.github.io/rust-clippy/master/index.html#arbitrary_source_item_ordering
 [`arc_with_non_send_sync`]: https://rust-lang.github.io/rust-clippy/master/index.html#arc_with_non_send_sync
 [`arithmetic_side_effects`]: https://rust-lang.github.io/rust-clippy/master/index.html#arithmetic_side_effects
 [`as_conversions`]: https://rust-lang.github.io/rust-clippy/master/index.html#as_conversions
@@ -5689,13 +5690,15 @@ Released 2018-09-13
 [`manual_unwrap_or_default`]: https://rust-lang.github.io/rust-clippy/master/index.html#manual_unwrap_or_default
 [`manual_while_let_some`]: https://rust-lang.github.io/rust-clippy/master/index.html#manual_while_let_some
 [`many_single_char_names`]: https://rust-lang.github.io/rust-clippy/master/index.html#many_single_char_names
+[`map_all_any_identity`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_all_any_identity
 [`map_clone`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_clone
 [`map_collect_result_unit`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_collect_result_unit
 [`map_entry`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_entry
 [`map_err_ignore`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_err_ignore
 [`map_flatten`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_flatten
 [`map_identity`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_identity
 [`map_unwrap_or`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_unwrap_or
+[`map_with_unused_argument_over_ranges`]: https://rust-lang.github.io/rust-clippy/master/index.html#map_with_unused_argument_over_ranges
 [`match_as_ref`]: https://rust-lang.github.io/rust-clippy/master/index.html#match_as_ref
 [`match_bool`]: https://rust-lang.github.io/rust-clippy/master/index.html#match_bool
 [`match_like_matches_macro`]: https://rust-lang.github.io/rust-clippy/master/index.html#match_like_matches_macro
@@ -5761,6 +5764,7 @@ Released 2018-09-13
 [`mutex_integer`]: https://rust-lang.github.io/rust-clippy/master/index.html#mutex_integer
 [`naive_bytecount`]: https://rust-lang.github.io/rust-clippy/master/index.html#naive_bytecount
 [`needless_arbitrary_self_type`]: https://rust-lang.github.io/rust-clippy/master/index.html#needless_arbitrary_self_type
+[`needless_as_bytes`]: https://rust-lang.github.io/rust-clippy/master/index.html#needless_as_bytes
 [`needless_bitwise_bool`]: https://rust-lang.github.io/rust-clippy/master/index.html#needless_bitwise_bool
 [`needless_bool`]: https://rust-lang.github.io/rust-clippy/master/index.html#needless_bool
 [`needless_bool_assign`]: https://rust-lang.github.io/rust-clippy/master/index.html#needless_bool_assign
@@ -6205,19 +6209,22 @@ Released 2018-09-13
 [`max-trait-bounds`]: https://doc.rust-lang.org/clippy/lint_configuration.html#max-trait-bounds
 [`min-ident-chars-threshold`]: https://doc.rust-lang.org/clippy/lint_configuration.html#min-ident-chars-threshold
 [`missing-docs-in-crate-items`]: https://doc.rust-lang.org/clippy/lint_configuration.html#missing-docs-in-crate-items
+[`module-item-order-groupings`]: https://doc.rust-lang.org/clippy/lint_configuration.html#module-item-order-groupings
 [`msrv`]: https://doc.rust-lang.org/clippy/lint_configuration.html#msrv
 [`pass-by-value-size-limit`]: https://doc.rust-lang.org/clippy/lint_configuration.html#pass-by-value-size-limit
 [`pub-underscore-fields-behavior`]: https://doc.rust-lang.org/clippy/lint_configuration.html#pub-underscore-fields-behavior
 [`semicolon-inside-block-ignore-singleline`]: https://doc.rust-lang.org/clippy/lint_configuration.html#semicolon-inside-block-ignore-singleline
 [`semicolon-outside-block-ignore-multiline`]: https://doc.rust-lang.org/clippy/lint_configuration.html#semicolon-outside-block-ignore-multiline
 [`single-char-binding-names-threshold`]: https://doc.rust-lang.org/clippy/lint_configuration.html#single-char-binding-names-threshold
+[`source-item-ordering`]: https://doc.rust-lang.org/clippy/lint_configuration.html#source-item-ordering
 [`stack-size-threshold`]: https://doc.rust-lang.org/clippy/lint_configuration.html#stack-size-threshold
 [`standard-macro-braces`]: https://doc.rust-lang.org/clippy/lint_configuration.html#standard-macro-braces
 [`struct-field-name-threshold`]: https://doc.rust-lang.org/clippy/lint_configuration.html#struct-field-name-threshold
 [`suppress-restriction-lint-in-const`]: https://doc.rust-lang.org/clippy/lint_configuration.html#suppress-restriction-lint-in-const
 [`too-large-for-stack`]: https://doc.rust-lang.org/clippy/lint_configuration.html#too-large-for-stack
 [`too-many-arguments-threshold`]: https://doc.rust-lang.org/clippy/lint_configuration.html#too-many-arguments-threshold
 [`too-many-lines-threshold`]: https://doc.rust-lang.org/clippy/lint_configuration.html#too-many-lines-threshold
+[`trait-assoc-item-kinds-order`]: https://doc.rust-lang.org/clippy/lint_configuration.html#trait-assoc-item-kinds-order
 [`trivial-copy-size-limit`]: https://doc.rust-lang.org/clippy/lint_configuration.html#trivial-copy-size-limit
 [`type-complexity-threshold`]: https://doc.rust-lang.org/clippy/lint_configuration.html#type-complexity-threshold
 [`unnecessary-box-size`]: https://doc.rust-lang.org/clippy/lint_configuration.html#unnecessary-box-size

src/tools/clippy/CONTRIBUTING.md

@@ -21,7 +21,6 @@ All contributors are expected to follow the [Rust Code of Conduct].
     - [Rust Analyzer](#rust-analyzer)
   - [How Clippy works](#how-clippy-works)
   - [Issue and PR triage](#issue-and-pr-triage)
-  - [Bors and Homu](#bors-and-homu)
   - [Contributions](#contributions)
   - [License](#license)
 
@@ -213,26 +212,13 @@ We have prioritization labels and a sync-blocker label, which are described belo
 Or rather: before the sync this should be addressed,
 e.g. by removing a lint again, so it doesn't hit beta/stable.
 
-## Bors and Homu
-
-We use a bot powered by [Homu][homu] to help automate testing and landing of pull
-requests in Clippy. The bot's username is @bors.
-
-You can find the Clippy bors queue [here][homu_queue].
-
-If you have @bors permissions, you can find an overview of the available
-commands [here][homu_instructions].
-
 [triage]: https://forge.rust-lang.org/release/triage-procedure.html
 [l-crash]: https://github.com/rust-lang/rust-clippy/labels/L-crash
 [l-bug]: https://github.com/rust-lang/rust-clippy/labels/L-bug
 [p-low]: https://github.com/rust-lang/rust-clippy/labels/P-low
 [p-medium]: https://github.com/rust-lang/rust-clippy/labels/P-medium
 [p-high]: https://github.com/rust-lang/rust-clippy/labels/P-high
 [l-sync-blocker]: https://github.com/rust-lang/rust-clippy/labels/L-sync-blocker
-[homu]: https://github.com/rust-lang/homu
-[homu_instructions]: https://bors.rust-lang.org/
-[homu_queue]: https://bors.rust-lang.org/queue/clippy
 
 ## Contributions
 
@@ -244,7 +230,7 @@ All PRs should include a `changelog` entry with a short comment explaining the c
 "what do you believe is important from an outsider's perspective?" Often, PRs are only related to a single property of a
 lint, and then it's good to mention that one. Otherwise, it's better to include too much detail than too little.
 
-Clippy's [changelog] is created from these comments. Every release, someone gets all commits from bors with a
+Clippy's [changelog] is created from these comments. Every release, someone gets all merge commits with a
 `changelog: XYZ` entry and combines them into the changelog. This is a manual process.
 
 Examples:

src/tools/clippy/Cargo.toml

@@ -39,7 +39,7 @@ toml = "0.7.3"
 walkdir = "2.3"
 filetime = "0.2.9"
 itertools = "0.12"
-pulldown-cmark = "0.11"
+pulldown-cmark = { version = "0.11", default-features = false, features = ["html"] }
 rinja = { version = "0.3", default-features = false, features = ["config"] }
 
 # UI test dependencies

src/tools/clippy/README.md

@@ -1,11 +1,10 @@
 # Clippy
 
-[![Clippy Test](https://github.com/rust-lang/rust-clippy/workflows/Clippy%20Test%20(bors)/badge.svg?branch=auto&event=push)](https://github.com/rust-lang/rust-clippy/actions?query=workflow%3A%22Clippy+Test+(bors)%22+event%3Apush+branch%3Aauto)
 [![License: MIT OR Apache-2.0](https://img.shields.io/crates/l/clippy.svg)](#license)
 
 A collection of lints to catch common mistakes and improve your [Rust](https://github.com/rust-lang/rust) code.
 
-[There are over 700 lints included in this crate!](https://rust-lang.github.io/rust-clippy/master/index.html)
+[There are over 750 lints included in this crate!](https://rust-lang.github.io/rust-clippy/master/index.html)
 
 Lints are divided into categories, each with a default [lint level](https://doc.rust-lang.org/rustc/lints/levels.html).
 You can choose how much Clippy is supposed to ~~annoy~~ help you by changing the lint level by category.