install_on_cubieboard.md

Install YunoHost on CubieBoard

Find other ways to install YunoHost here.

Requirements

• CubieBoard 1, 2 or CubieTruck.
• A micro-SD card: 8GB capacity (or more) and class10 speed rate are highly recommended
• An other computer to read this guide and access to your Cubieboard
• A screen and a keyboard are recommended to control your Cubieboard if a problem occurs
• A reasonable ISP, preferably with a good and unlimited upstream bandwidth
• The YunoHost Cubieboard image, available here (to unzip):
  • For Cubieboard 2

---

Installation steps

1. Copy image to the SD card

Before putting SD card on Cubieboard create repository nginx:

mkdir media/cubieboard/var/log/ngnix

2. Plug & boot

4. Post-install

---

Recommended after post-installation

• Connect via SSH: root@expemple.tld (password: yunohost)
• Change root password: passwd root or use SSH authentication via key
• Upgrade system: apt-get update && apt-get dist-upgrade && cubian-update

---

Create a YunoHost image for Cubieboard 1, 2 or 3

• Scripts for Cubian
• A Cubieboard Debian 7 image compatible with YunoHost:
  • Cubian
  • For Cubieboard 2 and 3
  • Cubieez

---

If you need help during one of these steps, do not hesitate to use our support tools.