TruePosition GPSDO monitor

Simple monitor device for trueposition gpsdo.

Tested only with version 12.1.1 of firmware/bootloader.

What does it do?

It boots up GPSDO by sending PROCEED command to bootloader. And it monitors status of antenna, 10mhz and 1hz signal, and actual device state.

LCD display shows current GPS time and date converted to UTC, temperature, and state.

If abnormal state is detected symbol is displayed next to current date.

After pressing button (long > 8sec), survey mode is entered. LCD displays survey time left.

Name		Name	Last commit message	Last commit date
Latest commit History 4 Commits
lib		lib
.gdbinit		.gdbinit
.gitignore		.gitignore
LiquidCrystal_I2C.c		LiquidCrystal_I2C.c
LiquidCrystal_I2C.h		LiquidCrystal_I2C.h
Makefile		Makefile
README.md		README.md
bsp_i2c.c		bsp_i2c.c
bsp_i2c.h		bsp_i2c.h
bsp_uart.c		bsp_uart.c
bsp_uart.h		bsp_uart.h
button.c		button.c
button.h		button.h
config.h		config.h
delay.c		delay.c
delay.h		delay.h
exti.c		exti.c
exti.h		exti.h
fifo.c		fifo.c
fifo.h		fifo.h
gpio.c		gpio.c
gpio.h		gpio.h
gps.c		gps.c
gps.h		gps.h
i2c.c		i2c.c
i2c.h		i2c.h
i2c_soft.c		i2c_soft.c
main.c		main.c
openocd.cfg		openocd.cfg
platform.h		platform.h
syscall.c		syscall.c
system_stm32f10x.c		system_stm32f10x.c
systime.c		systime.c
systime.h		systime.h
uart1.c		uart1.c
uart1.h		uart1.h
ui.c		ui.c
ui.h		ui.h
utils.c		utils.c
utils.h		utils.h