Push to production

documentation/asciidoc/accessories/audio/getting_started.adoc

@@ -12,8 +12,7 @@ A random pre-recorded five-second audio clip will be played when the button is p
 
 For this project, any small passive speaker should be sufficient. We're using one available https://shop.pimoroni.com/products/3-speaker-4-3w?variant=380549926[here], which handles 5W of power at 4Ω. We have also used an illuminated momentary push button, and a laser-cut box to house all the components; but both are entirely optional. This example will work just using the Codec Zero's on-board button, which is pre-wired to GPIO 27. (Alternatively, you can use any momentary push button, such as those available https://shop.pimoroni.com/products/mini-arcade-buttons?variant=40377171274[here].)
 
-image::images/wiring.jpg[width="80%"]
-//Note - BRIAN TO ADD LABELS TO THIS PHOTO - GPIO 27, +5V, and Ground x2.
+image::images/Chatterbox_Labels.png[width="80%"]
 
 Use a small flat-head screwdriver to attach your speaker to the screw terminals. For the additional push button, solder the button wires directly to the Codec Zero pads as indicated, using GPIO pin 27 and Ground for the switch, and +3.3V and Ground for the LED, if necessary.