Skip to content

Latest commit

 

History

History
112 lines (99 loc) · 4.01 KB

README.md

File metadata and controls

112 lines (99 loc) · 4.01 KB

With FW 3.12.0 we introduced the Thermal model see here. This have been finetuned for the stock Prusa MK3/S and may cause issues with 3rd party hotends.

This README is a guide for the community and the 3rd party companies to prepare/compile/build their own firmware.

Thanks to E3D and the some REVO community members see here and here we have been able to provide the source code to build the E3D REVO firmware.

There are other 3rd party hotends which the community uses.

Steps to add a new 3rd party hotend:

  1. Make a copy of the /Firmware/variant/1_75mm_MK3S-EINSy10a-E3Dv6full.h with a new name 1_75mm_MK3S-EINSy10a-<3rd party hotend:16>.h
  • Example for the E3D REVO HF 60W: /Firmware/variant/1_75mm_MK3S-EINSy10a-E3DREVO_HF_60W.h
  1. Open the new variant file.
  2. Search for #define NOZZLE_TYPE
  3. Change "E3Dv6full" to "<3rd party hotend:16>"
...
#define NOZZLE_TYPE "E3Dv6full"
...
  • Example
...
#define NOZZLE_TYPE "E3DREVO_HF_60W"
...
  1. Search #define CUSTOM_MENDEL_NAME
  2. Change "Prusa i3 MK3S" to "Prusa i3 MK3S-<Short description:2>"
  • CUSTOM_MENDEL_NAME string cannot exceed 16 chars in total!
...
#define CUSTOM_MENDEL_NAME "Prusa i3 MK3S"
...
  • Example
...
#define CUSTOM_MENDEL_NAME "Prusa i3 MK3S-RH"
...

...
#define CUSTOM_MENDEL_NAME "Prusa MK3S-RHF60"
...
  1. Add new PID values for the new Hotend type.
  • Search for // Define PID constants for extruder
  • Change extruder to new hotend name <3rd party hotend:16> and update the new hotend PID default values
// Define PID constants for extruder
#define  DEFAULT_Kp 16.13
#define  DEFAULT_Ki 1.1625
#define  DEFAULT_Kd 56.23
#endif

Example:

...
// Define PID constants for E3D REVO HF 60W
#define  DEFAULT_Kp 23.23
#define  DEFAULT_Ki 1.1
#define  DEFAULT_Kd 55.25
#endif
...
  1. Prepare for new 3rd party hotend TM value file
  • Search for #include "temp_model/e3d_v6.h"
  • Change the e3d_v6.h to <3rd party hotend:16>.h
  • Change below the E3D_V6 to <3rd party hotend:16>
...
#include "temp_model/e3d_v6.h"
#define TEMP_MODEL_DEFAULT E3D_V6 // Default E3D v6 model parameters
...

Example:

...
#include "temp_model/e3d_REVO_HF_60W.h"
#define TEMP_MODEL_DEFAULT E3D_REVO_HF_60W // Default E3D REVO HF 60W model parameters
...
  1. Save and close the new variant file
  2. Copy/paste Firmware/temp_model/e3d_v6.h as Firmware/temp_model/<3rd party hotend:16>.h
  • Example: Firmware/temp_model/e3d_REVO_HF_60W.h
  1. Open the new file Firmware/temp_model/<3rd party hotend:16>.h
  2. Search E3D_V6 and replace it with what you have used in #defined TEMP_MODEL_DEFAULT
  • Example
#pragma once

#define TEMP_MODEL_E3D_REVO_HF_60W_VER 1      // model parameters version

#define TEMP_MODEL_E3D_REVO_HF_60W_P 60.      // heater power (W)
#define TEMP_MODEL_E3D_REVO_HF_60W_U -0.0014  // linear temperature coefficient (W/K/power)
#define TEMP_MODEL_E3D_REVO_HF_60W_V 1.05     // linear temperature intercept (W/power)

#define TEMP_MODEL_E3D_REVO_HF_60W_C 8.77     // initial guess for heatblock capacitance (J/K)
#define TEMP_MODEL_E3D_REVO_HF_60W_R 25.3     // initial guess for heatblock resistance (K/W)

#define TEMP_MODEL_E3D_REVO_HF_60W_fS 0.15    // sim. 1st order IIR filter factor (f=100/27)
#define TEMP_MODEL_E3D_REVO_HF_60W_LAG 270    // sim. response lag (ms, 0-2160)

#define TEMP_MODEL_E3D_REVO_HF_60W_W 1.2      // Default warning threshold (K/s)
#define TEMP_MODEL_E3D_REVO_HF_60W_E 1.74     // Default error threshold (K/s)

// fall-back resistance vector (R0-15)
#define TEMP_MODEL_E3D_REVO_HF_60W_Rv {TEMP_MODEL_E3D_REVO_HF_60W_R, 23.9, 22.5, 19.6, 19.0, 18.3, 17.7, 17.1, 16.8, 16.5, 16.3, 16.0, 15.9, 15.7, 15.6, 15.4}