diff --git a/examples/chef/devices/rootnode_thermostat_bm3fb8dhYi.matter b/examples/chef/devices/rootnode_thermostat_bm3fb8dhYi.matter
index 282bc79e226418..086a3db0aa36c8 100644
--- a/examples/chef/devices/rootnode_thermostat_bm3fb8dhYi.matter
+++ b/examples/chef/devices/rootnode_thermostat_bm3fb8dhYi.matter
@@ -218,14 +218,6 @@ server cluster Scenes = 5 {
command GetSceneMembership(GetSceneMembershipRequest): GetSceneMembershipResponse = 6;
}
-server cluster Alarms = 9 {
- readonly attribute command_id generatedCommandList[] = 65528;
- readonly attribute command_id acceptedCommandList[] = 65529;
- readonly attribute attrib_id attributeList[] = 65531;
- readonly attribute bitmap32 featureMap = 65532;
- readonly attribute int16u clusterRevision = 65533;
-}
-
server cluster Descriptor = 29 {
struct DeviceType {
devtype_id type = 0;
@@ -1855,14 +1847,6 @@ endpoint 1 {
ram attribute clusterRevision default = 3;
}
- server cluster Alarms {
- callback attribute generatedCommandList;
- callback attribute acceptedCommandList;
- callback attribute attributeList;
- ram attribute featureMap;
- ram attribute clusterRevision default = 1;
- }
-
server cluster Descriptor {
callback attribute deviceList;
callback attribute serverList;
diff --git a/src/app/zap-templates/zcl/data-model/silabs/general.xml b/src/app/zap-templates/zcl/data-model/silabs/general.xml
index a44c64a6debc8d..d384934248d8eb 100644
--- a/src/app/zap-templates/zcl/data-model/silabs/general.xml
+++ b/src/app/zap-templates/zcl/data-model/silabs/general.xml
@@ -89,91 +89,6 @@ limitations under the License.
-
- Power Configuration
- General
- Attributes for determining more detailed information about a device's power source(s), and for configuring under/over voltage alarms.
- 0x0001
- POWER_CONFIG_CLUSTER
- true
- true
-
- mains voltage
- mains frequency
- mains alarm mask
- mains voltage min threshold
- mains voltage max threshold
- mains voltage dwell trip
- battery voltage
- battery percentage remaining
- battery manufacturer
- battery size
- battery ahr rating
- battery quantity
- battery rated voltage
- battery alarm mask
- battery voltage min threshold
- battery voltage threshold 1
- battery voltage threshold 2
- battery voltage threshold 3
- battery percentage min threshold
- battery percentage threshold 1
- battery percentage threshold 2
- battery percentage threshold 3
- battery alarm state
- battery 2 voltage
- battery 2 percentage remaining
- battery 2 manufacturer
- battery 2 size
- battery 2 ahr rating
- battery 2 quantity
- battery 2 rated voltage
- battery 2 alarm mask
- battery 2 voltage min threshold
- battery 2 voltage threshold 1
- battery 2 voltage threshold 2
- battery 2 voltage threshold 3
- battery 2 percentage min threshold
- battery 2 percentage threshold 1
- battery 2 percentage threshold 2
- battery 2 percentage threshold 3
- battery 2 alarm state
- battery 3 voltage
- battery 3 percentage remaining
- battery 3 manufacturer
- battery 3 size
- battery 3 ahr rating
- battery 3 quantity
- battery 3 rated voltage
- battery 3 alarm mask
- battery 3 voltage min threshold
- battery 3 voltage threshold 1
- battery 3 voltage threshold 2
- battery 3 voltage threshold 3
- battery 3 percentage min threshold
- battery 3 percentage threshold 1
- battery 3 percentage threshold 2
- battery 3 percentage threshold 3
- battery 3 alarm state
-
-
- Device Temperature Configuration
- General
- Attributes for determining information about a device's internal temperature, and for configuring under/over temperature alarms.
- 0x0002
- DEVICE_TEMP_CLUSTER
- true
- true
- current temperature
- min temp experienced
- max temp experienced
- over temp total dwell
- device temp alarm mask
- low temp threshold
- high temp threshold
- low temp dwell trip point
- high temp dwell trip point
-
Groups
General
@@ -365,74 +280,6 @@ limitations under the License.
-
- Alarms
- General
- Attributes and commands for sending notifications and configuring alarm functionality.
- 0x0009
- ALARM_CLUSTER
- true
- true
- alarm count
-
-
- Command description for ResetAlarm
-
-
-
-
-
-
- Command description for ResetAllAlarms
-
-
-
-
- Command description for GetAlarm
-
-
-
-
- Command description for ResetAlarmLog
-
-
-
-
- Command description for Alarm
-
-
-
-
-
-
- Command description for GetAlarmResponse
-
-
-
-
-
-
-
-
- Time
- General
- Attributes and commands that provide a basic interface to a real-time clock.
- 0x000A
- TIME_CLUSTER
- true
- true
-
- time
- time status
- time zone
- dst start
- dst end
- dst shift
- standard time
- local time
- last set time
- valid until time
-
Binary Input (Basic)
General
diff --git a/src/app/zap-templates/zcl/data-model/silabs/ha.xml b/src/app/zap-templates/zcl/data-model/silabs/ha.xml
index 58fe67cbca289a..f9a9598533f43c 100644
--- a/src/app/zap-templates/zcl/data-model/silabs/ha.xml
+++ b/src/app/zap-templates/zcl/data-model/silabs/ha.xml
@@ -26,25 +26,6 @@ limitations under the License.
-
- Shade Configuration
- Closures
- Attributes and commands for configuring a shade.
- 0x0100
- SHADE_CONFIG_CLUSTER
- true
- true
- physical closed limit
-
- motor step size
-
- status
-
- closed limit
-
- mode
-
-
Fan Control
HVAC
@@ -108,23 +89,6 @@ limitations under the License.
-
- Dehumidification Control
- HVAC
- An interface for controlling dehumidification.
- 0x0203
- DEHUMID_CONTROL_CLUSTER
- true
- true
- relative humidity
- dehumidification cooling
- RH dehumidification setpoint
- relative humidity mode
- dehumidification lockout
- dehumidification hysteresis
- dehumidification max cool
- relative humidity display
-
Thermostat User Interface Configuration
HVAC
@@ -480,546 +444,6 @@ limitations under the License.
-
- Carbon Monoxide Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the measurement of carbon monoxide concentration and reporting concentration measurements.
- 0x040C
- CARBON_MONOXIDE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Carbon Dioxide Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the carbon diaoxide concentration and reporting concentration measurements.
- 0x040D
- CARBON_DIOXIDE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Ethylene Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Ethylene concentration and reporting concentration measurements.
- 0x040E
- ETHYLENE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Ethylene Oxide Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Ethylene Oxide concentration and reporting concentration measurements.
- 0x040F
- ETHYLENE_OXIDE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Hydrogen Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Hydrogen concentration and reporting concentration measurements.
- 0x0410
- HYDROGEN_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Hydrogen Sulphide Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Hydrogen Sulphide concentration and reporting concentration measurements.
- 0x0411
- HYDROGEN_SULPHIDE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Nitric Oxide Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Nitric Oxide concentration and reporting concentration measurements.
- 0x0412
- NITRIC_OXIDE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Nitrogen Dioxide Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Nitrogen Dioxide concentration and reporting concentration measurements.
- 0x0413
- NITROGEN_DIOXIDE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Oxygen Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Oxygen concentration and reporting concentration measurements.
- 0x0414
- OXYGEN_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Ozone Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Ozone concentration and reporting concentration measurements.
- 0x0415
- OZONE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Sulfur Dioxide Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Sulphur Dioxide concentration and reporting concentration measurements.
- 0x0416
- SULFUR_DIOXIDE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Dissolved Oxygen Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Dissolved Oxygen concentration and reporting concentration measurements.
- 0x0417
- DISSOLVED_OXYGEN_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Bromate Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Bromate concentration, and reporting concentration measurements.
- 0x0418
- BROMATE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Chloramines Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Chloramines concentration and reporting concentration measurements.
- 0x0419
- CHLORAMINES_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Chlorine Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Chlorine concentration and reporting concentration measurements.
- 0x041A
- CHLORINE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Fecal coliform and E. Coli Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Fecal coliform and E. Coli concentration and reporting concentration measurements.
- 0x041B
- FECAL_COLIFORM_AND_E_COLI_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Fluoride Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Fluoride concentration and reporting concentration measurements.
- 0x041C
- FLUORIDE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Haloacetic Acids Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Haloacetic Acids concentration and reporting concentration measurements.
- 0x041D
- HALOACETIC_ACIDS_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Total Trihalomethanes Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Total Trihalomethanes concentration and reporting concentration measurements.
- 0x041E
- TOTAL_TRIHALOMETHANES_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Total Coliform Bacteria Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Total Coliform Bacteria concentration and reporting concentration measurements.
- 0x041F
- TOTAL_COLIFORM_BACTERIA_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Turbidity Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Turbidity concentration and reporting concentration measurements.
- 0x0420
- TURBIDITY_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Copper Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Copper concentration and reporting concentration measurements.
- 0x0421
- COPPER_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Lead Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Lead concentration and reporting concentration measurements.
- 0x0422
- LEAD_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Manganese Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Manganese concentration and reporting concentration measurements.
- 0x0423
- MANGANESE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Sulfate Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Sulfate concentration and reporting concentration measurements.
- 0x0424
- SULFATE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Bromodichloromethane Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Bromodichloromethane concentration and reporting concentration measurements.
- 0x0425
- BROMODICHLOROMETHANE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Bromoform Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Bromoform concentration and reporting concentration measurements.
- 0x0426
- BROMOFORM_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Chlorodibromomethane Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Chlorodibromomethane concentration and reporting concentration measurements.
- 0x0427
- CHLORODIBROMOMETHANE_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Chloroform Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Chloroform concentration and reporting concentration measurements.
- 0x0428
- CHLOROFORM_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
-
- Sodium Concentration Measurement
- Measurement & Sensing
- Attributes and commands for configuring the Sodium concentration and reporting concentration measurements.
- 0x0429
- SODIUM_CONCENTRATION_MEASUREMENT_CLUSTER
- true
- true
-
- measured value
-
- min measured value
-
- max measured value
-
- tolerance
-
-
Barrier Control
Closures
@@ -1050,420 +474,6 @@ limitations under the License.
-
- Appliance Control
- General
- This cluster provides an interface to remotely control and to program household appliances.
- 0x001B
- APPLIANCE_CONTROL_CLUSTER
- true
- true
- start time
- finish time
- remaining time
-
-
- This basic message is used to remotely control and to program household appliances.
-
-
-
-
-
- This basic message is used to retrieve Household Appliances status.
-
-
-
-
- This basic message is used to set appliance functions, i.e. information regarding the execution of an appliance cycle. Condition parameters such as start time or finish time information could be provided through this command.
-
-
-
-
-
-
-
- This command shall be used to resume the normal behavior of a household appliance being in pause mode after receiving a Overload Pause command.
-
-
-
-
- This command shall be used to pause the household appliance as a consequence of an imminent overload event.
-
-
-
-
- This basic message is used to send warnings the household appliance as a consequence of a possible overload event, or the notification of the end of the warning state.
-
-
-
-
-
- This command shall be used to return household appliance status, according to Appliance Status Values and Remote Enable Flags Values.
-
-
-
-
-
-
-
-
- This command shall be used to return household appliance status, automatically when appliance status changes.
-
-
-
-
-
-
-
-
- Power Profile
- General
- This cluster provides an interface for transferring power profile information from a device (e.g. Whitegood) to a controller (e.g. the Home Gateway). The Power Profile transferred can be solicited by client side (request command) or can be notified directly from the device (server side).
- 0x001A
- POWER_PROFILE_CLUSTER
- true
- true
- total profile num
- multiple scheduling
- energy formatting
- energy remote
- schedule mode
-
-
- The PowerProfileRequest Command is generated by a device supporting the client side of the Power Profile cluster in order to request the Power Profile of a server device.
-
-
-
-
-
- The PowerProfileStateRequest Command is generated in order to retrieve the identifiers of current Power Profiles.
-
-
-
-
- The GetPowerProfilePriceResponse command allows a device (client) to communicate the cost associated to the selected Power Profile to another device (server) requesting it.
-
-
-
-
-
-
-
-
- The GetOverallSchedulePriceResponse command allows a device (client) to communicate the overall cost associated to all Power Profiles scheduled to another device (server) requesting it.
-
-
-
-
-
-
-
- The EnergyPhasesScheduleNotification Command is generated by a device supporting the client side of the Power Profile cluster in order to schedule the start of the selected Power Profile and its phases.
-
-
-
-
-
-
-
- This command is generated by the client side of Power Profile cluster as a reply to the EnergyPhasesScheduleRequest command.
-
-
-
-
-
-
-
- The PowerProfileScheduleConstraintsRequest Command is generated by a device supporting the client side of the Power Profile cluster in order to request the constraints -if set- of Power Profile of a client device, in order to set the proper boundaries for the scheduling when calculating the schedules.
-
-
-
-
-
- The EnergyPhasesScheduleStateRequest Command is generated by a device supporting the client side of the Power Profile cluster to check the states of the scheduling of a power profile, which is supported in the device implementing the server side of Power Profile cluster.
-
-
-
-
-
- The Get Power Profile Price Extended Response command allows a device (client) to communicate the cost associated to all Power Profiles scheduled to another device (server) requesting it according to the specific options contained in the Get Power Profile Price Extended Response.
-
-
-
-
-
-
-
-
- The PowerProfileNotification Command is generated by a device supporting the server side of the Power Profile cluster in order to send the information of the specific parameters (such as Peak power and others) belonging to each phase.
-
-
-
-
-
-
-
-
- This command is generated by the server side of Power Profile cluster as a reply to the PowerProfileRequest command.
-
-
-
-
-
-
-
-
- The PowerProfileStateResponse command allows a device (server) to communicate its current Power Profile(s) to another device (client) that previously requested them.
-
-
-
-
-
-
- The GetPowerProfilePrice Command is generated by the server (e.g. White goods) in order to retrieve the cost associated to a specific Power profile.
-
-
-
-
-
- The PowerProfileStateNotification Command is generated by the server (e.g. White goods) in order to update the state of the power profile and the current energy phase.
-
-
-
-
-
-
- The GetOverallSchedulePrice Command is generated by the server (e.g. White goods) in order to retrieve the overall cost associated to all the Power Profiles scheduled by the scheduler (the device supporting the Power Profile cluster client side) for the next 24 hours.
-
-
-
-
- The EnergyPhasesScheduleRequest Command is generated by the server (e.g. White goods) in order to retrieve from the scheduler (e.g. Home Gateway) the schedule (if available) associated to the specific Power Profile carried in the payload.
-
-
-
-
-
- The EnergyPhasesScheduleStateResponse Command is generated by the server (e.g. White goods) in order to reply to a EnergyPhasesScheduleStateRequest command about the scheduling states that are set in the server side.
-
-
-
-
-
-
-
- The EnergyPhasesScheduleStateNotification Command is generated by the server (e.g. White goods) in order to notify (un-solicited command) a client side about the scheduling states that are set in the server side.
-
-
-
-
-
-
-
- The PowerProfileScheduleConstraintsNotification Command is generated by a device supporting the server side of the Power Profile cluster to notify the client side of this cluster about the imposed constraints and let the scheduler (i.e. the entity supporting the Power Profile cluster client side) to set the proper boundaries for the scheduling.
-
-
-
-
-
-
-
- The PowerProfileScheduleConstraintsResponse Command is generated by a device supporting the server side of the Power Profile cluster to reply to a client side of this cluster which sent a PowerProfileScheduleConstraintsRequest.
-
-
-
-
-
-
-
- The Get Power Profile Price Extended command is generated by the server (e.g., White Goods) in order to retrieve the cost associated to a specific Power profile considering specific conditions described in the option field (e.g., a specific time).
-
-
-
-
-
-
-
- Poll Control
- General
- This cluster provides a mechanism for the management of an end device's MAC Data Poll rate. For the purposes of this cluster, the term "poll" always refers to the sending of a MAC Data Poll from the end device to the end device's parent.
- 0x0020
- POLL_CONTROL_CLUSTER
- true
- true
-
- check-in interval
- long poll interval
- short poll interval
- fast poll timeout
- check in interval min
- long poll interval min
- fast poll timeout max
-
-
- The Poll Control Cluster server sends out a Check-in command to the devices to which it is paired based on the server's Check-in Interval attribute.
-
-
-
-
- The Check-in Response is sent in response to the receipt of a Check-in command.
-
-
-
-
-
-
- The Fast Poll Stop command is used to stop the fast poll mode initiated by the Check-in response.
-
-
-
-
- The Set Long Poll Interval command is used to set the read only Long Poll Interval Attribute.
-
-
-
-
-
- The Set Short Poll Interval command is used to set the read only Short Poll Interval Attribute.
-
-
-
-
-
- Appliance Identification
- Home Automation
- Attributes and commands for determining basic information about a device and setting user device information.
- 0x0B00
- APPLIANCE_IDENTIFICATION_CLUSTER
- true
- true
- basic identification
- company name
- company id
- brand name
- brand id
- model
- part number
- product revision
- software revision
- product type name
- product type id
- ceced specification version
-
-
-
- Meter Identification
- Home Automation
- This cluster provides Attributes and commands for determining advanced information about utility metering device.
- 0x0B01
- METER_IDENTIFICATION_CLUSTER
- true
- true
-
- company name
- meter type id
- data quality id
- customer name
- model
- part number
- product revision
- software revision
- utility name
- pod
- available power
- power threshold
-
-
- Appliance Events and Alert
- Home Automation
- Attributes and commands for transmitting or notifying the occurrence of an event, such as "temperature reached" and of an alert such as alarm, fault or warning.
- 0x0B02
- APPLIANCE_EVENTS_AND_ALERT_CLUSTER
- true
- true
-
-
- This basic message is used to retrieve Household Appliance current alerts.
-
-
-
-
- This message is used to return household appliance current alerts.
-
-
-
-
-
-
- This message is used to notify the current modification of warning and/or fault conditions.
-
-
-
-
-
-
- This message is used to notify an event occurred during the normal working of the appliance.
-
-
-
-
-
-
- Appliance Statistics
- Home Automation
-
- This cluster provides a mechanism for the transmitting appliance statistics to a collection unit (gateway). The statistics can be in format of data logs. In case of statistic information that will not fit the single ZigBee payload, the Partition cluster should be used.
-
- 0x0B03
- APPLIANCE_STATISTICS_CLUSTER
- true
- true
- log max size
- log queue max size
-
-
- The Appliance Statistics Cluster server occasionally sends out a Log Notification command to the devices to which it needs to log information related to statistics (e.g., home gateways) which implement the client side of Appliance Statistics Cluster.
-
-
-
-
-
-
-
-
- The Appliance Statistics Cluster server sends out a Log Response command to respond to a Log Request command generated by the client side of the Appliance Statistics cluster.
-
-
-
-
-
-
-
-
- The Log Queue Response command is generated as a response to a LogQueueRequest command in order to notify the client side of the Appliance statistics cluster about the logs stored in the server side (queue) that can be retrieved by the client side of this cluster through a LogRequest command.
-
-
-
-
-
-
- The Appliance Statistics Cluster server sends out a Statistic Available command to notify the client side of the Appliance Statistics cluster that there are statistics that can be retrieved by using the Log Request command.
-
-
-
-
-
-
- The Log request command is sent from a device supporting the client side of the Appliance Statistics cluster (e.g., Home Gateway) to retrieve the log from the device supporting the server side (e.g., appliance).
-
-
-
-
-
- The Log Queue Request command is send from a device supporting the client side of the Appliance Statistics cluster (e.g. Home Gateway) to retrieve the information about the logs inserted in the queue, from the device supporting the server side (e.g. appliance).
-
-
-
Electrical Measurement
Home Automation
diff --git a/src/app/zap-templates/zcl/data-model/silabs/types.xml b/src/app/zap-templates/zcl/data-model/silabs/types.xml
index 2647817d2da415..aabddbc6742a64 100644
--- a/src/app/zap-templates/zcl/data-model/silabs/types.xml
+++ b/src/app/zap-templates/zcl/data-model/silabs/types.xml
@@ -402,27 +402,6 @@ limitations under the License.
-
-
-