diff --git a/examples/lighting-app/bouffalolab/README.md b/examples/lighting-app/bouffalolab/README.md
index 49dd7fb8236452..db48724b5dd858 100644
--- a/examples/lighting-app/bouffalolab/README.md
+++ b/examples/lighting-app/bouffalolab/README.md
@@ -62,7 +62,7 @@ Mac OS.
sudo bash scripts/setup.sh
```
- Please execute following command export `BOUFFALOLAB_SDK_ROOT` before
+ Please execute following command to export `BOUFFALOLAB_SDK_ROOT` before
building.
```
@@ -74,36 +74,27 @@ Mac OS.
The following steps take examples for BL602 develop board `BL602-IoT-Matter-V1`
and BL706 develop board `XT-ZB6-DevKit`.
-- Build lighting app
+- Build lighting app with UART baudrate 2000000
```
./scripts/build/build_examples.py --target bouffalolab-bl602-iot-matter-v1-light build
./scripts/build/build_examples.py --target bouffalolab-xt-zb6-devkit-light build
```
-- UART baudrate is 2000000 by default; for baudrate 115200, please build
- target name with `-115200` appended
+- Build lighting app with UART baudrate 115200
- ```shell
+ ```
./scripts/build/build_examples.py --target bouffalolab-bl602-iot-matter-v1-light-115200 build
./scripts/build/build_examples.py --target bouffalolab-xt-zb6-devkit-light-115200 build
```
-- Build target name with `-rpc` appended for rpc enabled as following
- commands.
+- Build lighting app with RPC enabled and UART baudrate 115200.
- ```shell
+ ```
./scripts/build/build_examples.py --target bouffalolab-bl602-iot-matter-v1-light-rpc build
./scripts/build/build_examples.py --target bouffalolab-xt-zb6-devkit-light-rpc build
```
-- For multiple build options ,such as UART baudrate 115200 + rpc, please try
-
- ```shell
- ./scripts/build/build_examples.py --target bouffalolab-bl602-iot-matter-v1-light-rpc-115200 build
- ./scripts/build/build_examples.py --target bouffalolab-xt-zb6-devkit-light-rpc-115200 build
- ```
-
## Download image
- Using script `*.flash.py`.
@@ -113,9 +104,11 @@ and BL706 develop board `XT-ZB6-DevKit`.
`chip-bl702-lighting-example.flash.py` will generate under build output
folder for BL602 or BL702 building.
- > Note, different build options will generate different output folder.
-
- > Note, make sure terminal is under Matter build environment.
+ > Note 1, `*.flash.py` should be ran under Matter build environment; if
+ > python module `bflb_iot_tool` is not found, please try to do
+ > `source scripts/bootstrap.sh` or install as
+ > `pip3 install bflb-iot-tool`.
Note 2, different build options will
+ > generate different output folder.
Download operation steps as below, please check `help` option of script for
more detail.
@@ -154,7 +147,8 @@ and BL706 develop board `XT-ZB6-DevKit`.
> Note, better to append --erase option to download image for BL602
> develop board at first time.
-- Using `Bouffalo Lab` GUI flash tool`BLDevCube`
+- Using `Bouffalo Lab` GUI flash tool `BLDevCube`, please download on
+ [this page](https://dev.bouffalolab.com/download).
- Hold BOOT pin and reset chip, put the board in download mode.
- Select `DTS` file;
- Select Partition Table under
@@ -168,7 +162,7 @@ and BL706 develop board `XT-ZB6-DevKit`.
## Run the example
- You can open the serial console. For example, if the device is at
- `/dev/ttyACM0`:
+ `/dev/ttyACM0` with UART baudrate 2000000 built:
```shell
picocom -b 2000000 /dev/ttyACM0
@@ -182,11 +176,10 @@ and BL706 develop board `XT-ZB6-DevKit`.
- To do factory reset, press BOOT button over 4 seconds, release BOOT button
after led blink stopped.
-## Test with chip-tool
+## Test Commission and Control with chip-tool
Please follow [chip_tool_guide](../../../docs/guides/chip_tool_guide.md) and
-[guide](../../chip-tool/README.md) to build and use Matter official test
-chip-tool.
+[guide](../../chip-tool/README.md) to build and use chip-tool for test.
### Prerequisite for Thread Protocol
@@ -202,7 +195,7 @@ router to get Thread network credential.
sudo ot-ctl dataset active -x
```
-#### Commissioning over BLE
+### Commissioning over BLE
- Reset the board or factory reset the board
@@ -222,10 +215,10 @@ sudo ot-ctl dataset active -x
```
> ``, which is node ID assigned to device within chip-tool
- > fabric
> ``, Wi-Fi network SSID
> ``,
- > Wi-FI network password
> ``, Thread
- > network credential which running `sudo ot-ctl dataset active -x` command
- > on border router to get.
+ > fabric
``, Wi-Fi network SSID
``, Wi-FI
+ > network password
``, Thread network
+ > credential which running `sudo ot-ctl dataset active -x` command on border
+ > router to get.
### Cluster control
@@ -263,7 +256,7 @@ After successful commissioning, cluster commands available to control the board.
./chip-tool identify identify 10 1
```
-## OTA software upgrade with ota-provider-app
+## Test OTA software upgrade with ota-provider-app
Please take [guide](../../ota-provider-app/linux/README.md) for more detail on
ota-provider-app build and usage.
@@ -309,13 +302,14 @@ ota-provider-app build and usage.
### Start ota software upgrade
-- BLE commission BL702 lighting if not commissioned.
+- BLE commission BL602/BL702 lighting if not commissioned.
- Start OTA software upgrade process
```shell
./chip-tool otasoftwareupdaterequestor announce-ota-provider 1 0 0 0 0
```
- where `` is node id of BL702 lighting app.
-- After OTA software upgrade gets done, BL702 will get reboot automatically.
+ where `` is node id of BL602/BL702 lighting app.
+- After OTA software upgrade gets done, BL602/BL702 will get reboot
+ automatically.
## Run RPC Console
diff --git a/scripts/requirements.bouffalolab.txt b/scripts/requirements.bouffalolab.txt
index ceda55f866c282..87fa5c49ab96e5 100644
--- a/scripts/requirements.bouffalolab.txt
+++ b/scripts/requirements.bouffalolab.txt
@@ -1 +1 @@
-bflb-iot-tool>=1.8.0 ; platform_machine != 'aarch64' and sys_platform == 'linux'
\ No newline at end of file
+bflb-iot-tool>=1.8.0