pellet stove with channeled air - flumenfire 12 -ca

[sanya238]

tool is working with flumenfire with channeled air (2 air channel on backside - they have additional fan).
In this stove in serial socket connected expansion board - I055
But this board have serial connector too (without 5v)
I connected GND and serial to expansion board, and 5v to main board.
Work excellent, but strange fume temp - 10 and flame power only 38%.

[sanya238]

And more - new format for sensor
mqtt:
sensor:
- state_topic: "micronova/pong"
name: "pellet stove"
qos: 0
icon: mdi:power
- state_topic: "micronova/ambtemp"
name: "pellet stove ambient temp"
unit_of_measurement: "ºC"
icon: mdi:thermometer
qos: 0
- state_topic: "micronova/state"
name: "pellet stove power state"
qos: 0
icon: mdi:fire-alert
- state_topic: "micronova/fumetemp"
name: "pellet stove flame temp"
qos: 0
unit_of_measurement: "ºC"
icon: mdi:thermometer
- state_topic: "micronova/flamepower"
name: "Pellet stove flame power"
qos: 0
unit_of_measurement: "%"
icon: mdi:fire

[philibertc]

Hello,
I seem to have missed this discussion, I apologize for that.
Is there anything new?
I will update the readme for the new MQTT configuration.

Bests,
philibertc