SPLiT SIP Phone Learning Tool

Status of the project

This project is currently not maintained, works only on Python 2.x which is EOL. Adoptions of the project are more than welcome, if you are interested, please contact me.

SPLiT is a very simple, not performant, insecure, and non fully RFC compliant SIP stateless proxy, DHCP, TFTP and HTTP server.

There are a lot of very good SIP proxies out there, don't try to use SPLiT in a production/working environment.

SPLiT is developed with hackability in mind, the main target is to reproduce SIP issues, or training / learning purpose.

Main features

SIP Registrar with challenge authentication
SIP Stateless Proxy or Redirect server mode
SIP UDP only suppport
SIP custom headers
Embedded SIP Multicast Plug&Play provisioining server
Embedded DHCP server with 66 and 67 options support
Embedded HTTP server
Embedded TFTP server
Self contained and portable: tested on OS-X, Linux, Windows
TKinter GUI interface

Installation

You need the Python 2.7 (Python 3 isn't supported yet) interpreter already installed, you can find on the Python website
Download the last release archive file from https://github.com/pbertera/SPLiT/releases and save in your computer
Run the script from a terminal (or a cmd.exe prompt in Windows)

Usage

In order to run SPLiT you need Python installed, (tested on 2.7.8 only at the moment), you can start the server from command line:

pietro$ python SPLiT.py -d -i 172.16.18.14 -P protected
2015-03-06 15:38:00,155 INFO Starting proxy at Fri, 06 Mar 2015 15:38:00 
2015-03-06 15:38:00,155 DEBUG Using the Record-Route header: Record-Route: <sip:172.16.18.14:5060;lr>
2015-03-06 15:38:00,155 DEBUG Using the top Via header: Via: SIP/2.0/UDP 172.16.18.14:5060
2015-03-06 15:38:00,156 DEBUG Writing SIP messages in sip.log log file
2015-03-06 15:38:00,156 DEBUG Authentication password: protected
2015-03-06 15:38:00,156 DEBUG Logfile: None
2015-03-06 15:38:00,157 INFO Starting serving SIP requests on 172.16.18.14:5060, press CTRL-C for exit.

On windows (in a cmd.exe prompt):

c:\Python27\Python.exe  SPLiT.py -d -i 172.16.18.14 -P protected
2015-03-06 15:38:00,155 INFO Starting proxy at Fri, 06 Mar 2015 15:38:00 
2015-03-06 15:38:00,155 DEBUG Using the Record-Route header: Record-Route: <sip:172.16.18.14:5060;lr>
2015-03-06 15:38:00,155 DEBUG Using the top Via header: Via: SIP/2.0/UDP 172.16.18.14:5060
2015-03-06 15:38:00,156 DEBUG Writing SIP messages in sip.log log file
2015-03-06 15:38:00,156 DEBUG Authentication password: protected
2015-03-06 15:38:00,156 DEBUG Logfile: None
2015-03-06 15:38:00,157 INFO Starting serving SIP requests on 172.16.18.14:5060, press CTRL-C for exit.

Command line options

pietro$ python SPLiT.py -h
Usage: SPLiT.py [OPTIONS]

Options:
    -h, --help            show this help message and exit
    -t                    Run in terminal mode (no GUI)
    -d                    Run in debug mode
    -i IP_ADDRESS         Specify ip address to bind on (default: 127.0.0.1)
    -l LOGFILE            Specify the log file (default: log to stdout)
    --sip-redirect        Act as a redirect server
    --sip-port=SIP_PORT   Specify the UDP port (default: 5060)
    --sip-log=SIP_LOGFILE
                          Specify the SIP messages log file (default: log to
                          stdout)
    --sip-expires=SIP_EXPIRES
                          Default registration expires (default: 3600)
    --sip-password=SIP_PASSWORD
                          Authentication password (default: protected)
    --sip-exposedip=SIP_EXPOSED_IP
                          Exposed/Public IP to use into the Record-Route header
    --sip-exposedport=SIP_EXPOSED_PORT
                          Exposed/Public port to use into the Record-Route
                          header
    --sip-customheader=CUSTOM_HEADERS
                          Add a custom SIP header to the forwarded request:
                          <method>:<URI-regex>:<SIP-Header
    --sip-authenticatedreq=AUTHENTICATED_REQUESTS
                          Request the authentication for the specified requests
    --pnp                 Enable the PnP server
    --pnp-uri=PNP_URI     Configure the PnP URL
    --tftp                Enable the TFTP server
    --tftp-root=TFTP_ROOT
                          TFTP server root directory (default: tftp)
    --tftp-port=TFTP_PORT
                          TFTP server port (default: 69)
    --http                Enable the HTTP server
    --http-root=HTTP_ROOT
                          HTTP server root directory (default: http)
    --http-port=HTTP_PORT
                          HTTP server port (default: 80)
    --dhcp                Enable the DHCP server
    --dhcp-begin=DHCP_BEGIN
                          DHCP lease range start
    --dhcp-end=DHCP_END   DHCP lease range end
    --dhcp-subnetmask=DHCP_SUBNETMASK
                          DHCP lease subnet mask
    --dhcp-gateway=DHCP_GATEWAY
                          DHCP lease gateway
    --dhcp-dns=DHCP_DNS   DHCP lease DNS
    --dhcp-bcast=DHCP_BCAST
                          DHCP lease broadcast
    --dhcp-fileserver=DHCP_FILESERVER
                          DHCP lease fileserver IP (option 66)
    --dhcp-filename=DHCP_FILENAME
                          DHCP lease filename (option 67)
    --dhcp-leasesfile=DHCP_LEASESFILE
                          DHCP leases file store

General options

-t Run the software in terminal mode withouth graphical UI, default: run in GUI mode
-d Run in debug mode, very verbose, default: debug is disabled
-i <IP_address> Binds all the service on the local IP <IP_Address>, default: 127.0.0.1
-l <log_file> Wite the logs into <log_file>, default: no logfile, logs are sent to stdout

SIP Proxy options

--sip-redirect Act as a SIP redirect: instead forwarding the requests reply with a SIP 302 Moved, the Contact contains the destination URI, default: disabled
--sip-port <SIP_port> Specify the SIP port to use, default: 5060
--sip-log <SIP_log_file> Write the SIP log into the file <\SIP_log_file>, default: send the messages to stdout
--sip-expires <expires_value> Default registration Expires header value, default: 3600
--sip-password <SIP_password> SIP password, default: protected
--sip-exposedip <IP_address> IP address to report into the Record-Route header, default: the local IP address
--sip-exposedport <SIP_port> SIP port to report into the Record-Route header, default: the local SIP port
--sip-customheader <Custom_header_rule> Add a custom SIP header to all the request matching the filter defined into this option, see below, defaut: none
--sip-authenticatedreq <SIP-request> Request a Proxy-Authentication challange for all the <SIP_request> requests (eg. INVITE), default: none
--sip-no-record-route Doesn't add the Record-Route header

Adding SIP custom headers

Using the switch --sip-customheader you can add one or more SIP headers to forwarded requests, you can filter on the SIP method and the destination URI. The --sip-customheader value is a strig composed by 3 token separated by the : character:

first token represent the SIP method (use * to match all)
second token must contain a valid regex, the regex is evaluated against the request SIP URI
the third token contains the SIP header (header name + header value)

Example:

./SPLiT.py -i 172.16.18.15 -d -t \
	--sip-customheader="INVITE:^.{4,}@.*$:Alert-Info: <http://www.notused.com>;info=alert-external" \
	--sip-customheader="INVITE:^.{3,3}@.*$:Alert-Info: <http://www.notused.com>;info=alert-internal" \
	--sip-customheader="*:.*:X-Forwarded-from: SPLiT Proxy"

Using this command SPLiT will:

add the custom header Alert-Info: http://www.notused.com;info=alert-external only to the INVITE requests sent to all the SIP URI with len greater or equal to 4.
add the custom header Alert-Info: http://www.notused.com;info=alert-internal only to the INVITE requests sent to all the SIP URI with len lesser than 3.
add the custom header X-Forwarded-from: SPLiT Proxy to all the requests sent to all the SIP URI

SIP PnP Server options

--pnp Enable the Plug&Play server, default: disabled
--pnp-uri <PnP_URI> Plug&Play provisioning URI, default: http://provisioning.snom.com/{model}/{model}.php?mac={mac}

TFTP Server options

--tftp Enable the TFTP server, default: disabled
--tftp-root <TFTP_root_dir> TFTP server root directory: all the file and folders contained in <TFTP_root_dir> will be accessible via TFTP. If an absolute path isn't provided the directory will be resolved starting from the process current path, default: tftp
--tftp-port <TFTP_port> TFTP server port: the TFTP server will bind to the <TFTP_port UDP port, default: 69

HTTP Server options

--http Enable the HTTP server, default: disabled
--http-root <HTTP_root_dir> HTTP server root directory: all the file and folders contained in <HTTP_root_dir> will be accessible via HTTP. If an absolute path isn't provided the directory will be resolved starting from the process current path, default: http
--http-port <HTTP_port> HTTP server port: the HTTP server will bind to the <TFTP_port TCP port, default: 80

DHCP Server options

--dhcp Enable the DHCP server, default: disabled
--dhcp-begin <DHCP_BEGIN> Start address, DHCP leases will be assigned starting from <DHCP_BEGIN>, default: none
--dhcp-end <DHCP_END> End address, DHCP leases will be assigned up to the <DHCP_END>, default: none
--dhcp-subnetmask <DHCP_Subnet_mask> Subnet mask to provided to the DHCP clients, default: none
--dhcp-gateway <DHCP_Gateway> Gateway provided to the clients, default: none
--dhcp-dns <DHCP_Dns> DNS server provided to the clients, default: none
--dhcp-bcast <DHCP_Broadcast> Broadcast address provided to the clients, default: none
--dhcp-fileserver <OPT-66_Value> DHCP option 66 value, default: none
--dhcp-filename <OPT-67_Value> DHCP option 67 value, default: none
--dhcp-leasesfile <DHCP_leasesfile> DHCP server will save the leases into the file specified by <DHCP_leasesfile>, default: dhcp_leases.dat

Screenshots

Main tab:

SIP trace:

Log messages:

Known issues

This tool is designed for training and debugging purpose only, HTTP and TFTP server doesn't check requests against "path walking" attacks, in order to open a DHCP or TFTP socket the tool must run with admin privileges. Please use it only in trusted environments

Name		Name	Last commit message	Last commit date
Latest commit History 128 Commits
docker		docker
docs		docs
img		img
pypxe		pypxe
tests		tests
.gitignore		.gitignore
README.md		README.md
SPLiT.py		SPLiT.py
gui.py		gui.py
http.py		http.py
makedist-linux		makedist-linux
makedist-osx		makedist-osx
makedist-w32.bat		makedist-w32.bat
pnp.py		pnp.py
proxy.py		proxy.py
utils.py		utils.py

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

SPLiT SIP Phone Learning Tool

Status of the project

Main features

Installation

Usage

Command line options

General options

SIP Proxy options

Adding SIP custom headers

Example:

SIP PnP Server options

TFTP Server options

HTTP Server options

DHCP Server options

Screenshots

Known issues

TODO

About

Releases 4

Packages

Contributors 2

Languages

pbertera/SPLiT

Folders and files

Latest commit

History

Repository files navigation

SPLiT SIP Phone Learning Tool

Status of the project

Main features

Installation

Usage

Command line options

General options

SIP Proxy options

Adding SIP custom headers

Example:

SIP PnP Server options

TFTP Server options

HTTP Server options

DHCP Server options

Screenshots

Known issues

TODO

About

Resources

Stars

Watchers

Forks

Releases 4

Packages 0

Contributors 2

Languages

Packages