Skip to content

Latest commit

 

History

History
407 lines (298 loc) · 19.5 KB

rpc-metrics.md

File metadata and controls

407 lines (298 loc) · 19.5 KB

Semantic Conventions for RPC Metrics

Status: Experimental

The conventions described in this section are RPC specific. When RPC operations occur, measurements about those operations are recorded to instruments. The measurements are aggregated and exported as metrics, which provide insight into those operations. By including RPC properties as attributes on measurements, the metrics can be filtered for finer grain analysis.

Warning Existing RPC instrumentations that are using v1.20.0 of this document (or prior):

  • SHOULD NOT change the version of the networking conventions that they emit by default until the HTTP semantic conventions are marked stable (HTTP stabilization will include stabilization of a core set of networking conventions which are also used in RPC instrumentations). Conventions include, but are not limited to, attributes, metric and span names, and unit of measure.
  • SHOULD introduce an environment variable OTEL_SEMCONV_STABILITY_OPT_IN in the existing major version which is a comma-separated list of values. The only values defined so far are:
    • http - emit the new, stable networking conventions, and stop emitting the old experimental networking conventions that the instrumentation emitted previously.
    • http/dup - emit both the old and the stable networking conventions, allowing for a seamless transition.
    • The default behavior (in the absence of one of these values) is to continue emitting whatever version of the old experimental networking conventions the instrumentation was emitting previously.
    • Note: http/dup has higher precedence than http in case both values are present
  • SHOULD maintain (security patching at a minimum) the existing major version for at least six months after it starts emitting both sets of conventions.
  • SHOULD drop the environment variable in the next major version.

Metric instruments

The following metric instruments MUST be used to describe RPC operations. They MUST be of the specified type and units.

Note: RPC server and client metrics are split to allow correlation across client/server boundaries, e.g. Lining up an RPC method latency to determine if the server is responsible for latency the client is seeing.

RPC Server

Below is a list of RPC server metric instruments.

Metric: rpc.server.duration

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.server.duration Histogram ms Measures the duration of inbound RPC. [1] Experimental

[1]: While streaming RPCs may record this metric as start-of-batch to end-of-batch, it's hard to interpret in practice.

Streaming: N/A.

Metric: rpc.server.request.size

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.server.request.size Histogram By Measures the size of RPC request messages (uncompressed). [1] Experimental

[1]: Streaming: Recorded per message in a streaming batch

Metric: rpc.server.response.size

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.server.response.size Histogram By Measures the size of RPC response messages (uncompressed). [1] Experimental

[1]: Streaming: Recorded per response in a streaming batch

Metric: rpc.server.requests_per_rpc

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.server.requests_per_rpc Histogram {count} Measures the number of messages received per RPC. [1] Experimental

[1]: Should be 1 for all non-streaming RPCs.

Streaming : This metric is required for server and client streaming RPCs

Metric: rpc.server.responses_per_rpc

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.server.responses_per_rpc Histogram {count} Measures the number of messages sent per RPC. [1] Experimental

[1]: Should be 1 for all non-streaming RPCs.

Streaming: This metric is required for server and client streaming RPCs

RPC Client

Below is a list of RPC client metric instruments. These apply to traditional RPC usage, not streaming RPCs.

Metric: rpc.client.duration

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.client.duration Histogram ms Measures the duration of outbound RPC. [1] Experimental

[1]: While streaming RPCs may record this metric as start-of-batch to end-of-batch, it's hard to interpret in practice.

Streaming: N/A.

Metric: rpc.client.request.size

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.client.request.size Histogram By Measures the size of RPC request messages (uncompressed). [1] Experimental

[1]: Streaming: Recorded per message in a streaming batch

Metric: rpc.client.response.size

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.client.response.size Histogram By Measures the size of RPC response messages (uncompressed). [1] Experimental

[1]: Streaming: Recorded per response in a streaming batch

Metric: rpc.client.requests_per_rpc

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.client.requests_per_rpc Histogram {count} Measures the number of messages received per RPC. [1] Experimental

[1]: Should be 1 for all non-streaming RPCs.

Streaming: This metric is required for server and client streaming RPCs

Metric: rpc.client.responses_per_rpc

This metric is recommended.

Name Instrument Type Unit (UCUM) Description Stability
rpc.client.responses_per_rpc Histogram {count} Measures the number of messages sent per RPC. [1] Experimental

[1]: Should be 1 for all non-streaming RPCs.

Streaming: This metric is required for server and client streaming RPCs

Attributes

Below is a table of attributes that SHOULD be included on client and server RPC measurements.

Attribute Type Description Examples Requirement Level Stability
rpc.system string A string identifying the remoting system. See below for a list of well-known identifiers. grpc; java_rmi; dotnet_wcf Required Experimental
network.transport string OSI transport layer or inter-process communication method. [1] tcp; udp Recommended Stable
network.type string OSI network layer or non-OSI equivalent. [2] ipv4; ipv6 Recommended Stable
rpc.method string The name of the (logical) method being called, must be equal to the $method part in the span name. [3] exampleMethod Recommended Experimental
rpc.service string The full (logical) name of the service being called, including its package name, if applicable. [4] myservice.EchoService Recommended Experimental
server.address string Server domain name if available without reverse DNS lookup; otherwise, IP address or Unix domain socket name. [5] example.com; 10.1.2.80; /tmp/my.sock Recommended Stable
server.port int Server port number. [6] 80; 8080; 443 Recommended Stable

[1]: The value SHOULD be normalized to lowercase.

Consider always setting the transport when setting a port number, since a port number is ambiguous without knowing the transport. For example different processes could be listening on TCP port 12345 and UDP port 12345.

[2]: The value SHOULD be normalized to lowercase.

[3]: This is the logical name of the method from the RPC interface perspective, which can be different from the name of any implementing method/function. The code.function attribute may be used to store the latter (e.g., method actually executing the call on the server side, RPC client stub method on the client side).

[4]: This is the logical name of the service from the RPC interface perspective, which can be different from the name of any implementing class. The code.namespace attribute may be used to store the latter (despite the attribute name, it may include a class name; e.g., class with method actually executing the call on the server side, RPC client stub class on the client side).

[5]: When observed from the client side, and when communicating through an intermediary, server.address SHOULD represent the server address behind any intermediaries, for example proxies, if it's available.

[6]: When observed from the client side, and when communicating through an intermediary, server.port SHOULD represent the server port behind any intermediaries, for example proxies, if it's available.

network.transport has the following list of well-known values. If one of them applies, then the respective value MUST be used; otherwise, a custom value MAY be used.

Value Description Stability
pipe Named or anonymous pipe. Stable
quic QUIC Experimental
tcp TCP Stable
udp UDP Stable
unix Unix domain socket Stable

network.type has the following list of well-known values. If one of them applies, then the respective value MUST be used; otherwise, a custom value MAY be used.

Value Description Stability
ipv4 IPv4 Stable
ipv6 IPv6 Stable

rpc.system has the following list of well-known values. If one of them applies, then the respective value MUST be used; otherwise, a custom value MAY be used.

Value Description Stability
apache_dubbo Apache Dubbo Experimental
connect_rpc Connect RPC Experimental
dotnet_wcf .NET WCF Experimental
grpc gRPC Experimental
java_rmi Java RMI Experimental

For client-side metrics server.port is required if the connection is IP-based and the port is available (it describes the server port they are connecting to). For server-side spans server.port is optional (it describes the port the client is connecting from).

Service name

On the server process receiving and handling the remote procedure call, the service name provided in rpc.service does not necessarily have to match the service.name resource attribute. One process can expose multiple RPC endpoints and thus have multiple RPC service names. From a deployment perspective, as expressed by the service.* resource attributes, it will be treated as one deployed service with one service.name.

Semantic Conventions for specific RPC technologies

More specific Semantic Conventions are defined for the following RPC technologies:

  • Connect: Semantic Conventions for Connect RPC.
  • gRPC: Semantic Conventions for gRPC.
  • JSON-RPC: Semantic Conventions for JSON-RPC.

Specifications defined by maintainers of RPC systems:

  • gRPC: Semantic Conventions for gRPC.