vim from scratch

This document is a work in progress, any feedback or addition is welcomed.

Minimal vim setup

To successfully use merlin from vim, you need to have an already configured vim setup. The bare vim installation from your system won't do (a bunch of stuff need to be activated: syntax on, filetype plugin on, etc.).

If it's your first time with vim, you should probably document yourself somewhere else before reading the rest of this page. If however you wish to continue in a hurry, you can still start by installing Tim Pope's vim-sensible.

Adding merlin to the mix

Note that we encourage everyone to install merlin through opam, for two reasons:

1. it's a lot easier
2. you should then have a version of merlin that is known to work

That being said, it might make sense to install it from git:

• you want to help improve it (you're very welcome!)
• you noticed a bug in the opam version which is fixed on git
• you're cool and no one tells you what to do

With that in mind, feel free to choose the option you prefer.

With opam

Just run (should work on 4.00.1 and 4.01.0):

opam install merlin

And add the following to your .vimrc:

let g:opamshare = substitute(system('opam config var share'),'\n$','','''')
execute "set rtp+=" . g:opamshare . "/merlin/vim"

That not only adds merlin to your runtime path, but will always pick the version corresponding to your opam switch without you needing to modify your config (assuming you install merlin on each of your switches).

Note that you need to run :

:execute "helptags " . substitute(system('opam config var share'),'\n$','','''') .  "/merlin/vim/doc"

manually to update the documentation.

Thanks to Gabriel Kerneis for this contribution.

From git

Once you have cloned you must run the following commands:

# You can run the following with -help to have more informations
./configure
make
make install

The configure step will have printed you where the vim mode is installed. If it is in /some/path/merlin/vim then you need to add:

set rtp+=/some/path/merlin/vim

To your .vimrc.
You can the generate the documentation using:

:helptags /some/path/merlin/vim/doc

Note: although you can use pathogen here, we strongly recommend not using Vundle. The reason for that being that you need to keep your vim plugin synchronized with the ocamlmerlin executable (they need to understand the same protocol), which probably won't be the case if you fetch the plugin from github.

Discovering the shiny features

Follows a non-ordered list of the features merlin provides, and an explanation on how to access them from vim.

Error reporting

Merlin knows about the syntax and type errors of your code. And it can tell vim about it.

You can get this list in manually by running :MerlinErrorCheck commad.

Otherwise, we recommend using Syntastic for displaying these errors. Add this to your .vimrc to integrate it with merlin:

let g:syntastic_ocaml_checkers = ['merlin']

Once you have it, syntastic should ask merlin for errors in your buffer every time you save your file. So little signs should appear on the border of your window when you save and your code contains errors and disappear once you've fixed them.

Completion

Merlin offers completion as you would find in other IDEs: given a prefix, it will suggest all the elements of the current environment matching the given prefix and display their type.

Completion should be available out of the box using the omnicompletion facility of vim, you need only type <C-x><C-o> and a popup like the one in the previous screenshot should appear.

Several plugins exists out there to make completion nicer to use in vim, they should all work with merlin; at the cost of a small configuration.

More information about such plugins is available in the documentation shipped with merlin's vim plugin (so: :h merlin.txt or directly from github).

Extracting type informations

While coding, you can query Merlin for the type of expressions. You just need to place your cursor on the expression you want type, and call :MerlinTypeOf (which is bound by default en <Localleader>t, see :h localleader) and vim should then display the type in the command line, and highlight the considered expression.

For example:

Notice here that the cursor is on map, if it were on Option then the signature of the Option module would have been printed.

Note also that you can grow (or shrink!) the expression you want to type using :MerlinGrowEnclosing (<Localleader>n) or :MerlinShrinkEnclosing (<Localleader>p), for example on my previous code:

And you can do that several times (until there's nowhere left to grow).

The TypeOf command also works in visual mode:

And accepts arguments! So :MerlinTypeOf 23 + 42 would have given the same result as on the last screenshot.

Source browsing

There are mainly two ways Merlin can help you browse the source of you project. One, which one can find in nearly every IDE on the planet, is a jump to definition facility, accessible through the :MerlinLocate command. That command is to be used in the same way as :MerlinTypeOf: either you give it an argument (an arbitatry identifier, but no expressions, for obvious reasons) or you place it on a word of your buffer and call it without arguments.

Note that it might happen that merlin fails to find the definition location of the identifier you gave him, several things might explain that:

1. you are asking him for the definition of something defined in an other file and:
   • either that file is not in the load path of merlin (you need to setup a .merlin!)
   • or you didn't compile with -bin-annot.
2. you are asking him for the definition of something local to your file but the place where that thing is defined doesn't parse or doesn't typecheck, and the identifier is not present in the environment

If it doesn't work, but none of the above explains why, open an issue!

The other way of browsing your project is through the commands :ML and :MLI which expect a module name as an argument (completion is provided!) and open the corresponding file.

Getting further

Configuring your project

Or " why doesn't merlin know about my other files? "

By default, when you edit a file in a directory foo/ merlin will add foo/ to its load path. As your projects grow however, your files will often be spread among several (sub)directories, at this point you will need to inform merlin about the structure of your project.

To do that, you need to create a .merlin file at the root of your project. A .merlin file will look something like :

# structure of my awesome project
S src
S src/foo
S src/bar

B _build/src
B _build/src/foo
B _build/src/bar

The S directive tells merlin where to find source files (for you use with the :ML and :MLI commands) and the B tells it where to find cmi (used for basically everything) and cmt (used for :MerlinLocate) files.

There is a lot more to .merlin files than just S and B. Have a look at the power guide to .merlin to know more.

Using libraries

Or " merlin complains about 'Unbound module Core' "

When you want to use external libraries that you installed with findlib (that's the case when you install them with opam) you need to tell merlin which ones you use.

You can do that on a per-session basis using the :Use command followed by the name of the package (completion on packages name is provided, but you can always call ocamlfind list from a shell to have the list of installed packages).

Or you can set it once and for all for your project by adding the directive PKG followed by packages name to the .merlin of your project. For example :

PKG core lwt

Using syntax extensions

Or " merlin complains about 'Unbound value lwt' "

Merlin has specifics support for syntax extensions, however not all are enabled by default. Those which aren't enabled are the one introducing new keywords, lwt for example.

Again you can choose to enable/disable these on a per-session basis with :MerlinExtEnable and :MerlinExtDisable again followed by a name (completion is once more provided).
Or you can set them in your .merlin with the EXT directive.

Troubleshooting

If merlin doesn't seem to work for you, here are a few things you can do to understand what's going wrong :

Ensure merlin (the executable, named "ocamlmerlin") is indeed running, and if it's not make sure that the merlin plugin is loaded. You can use :scriptnames to have a list of the loaded script files.
If it's not, then check that it indeed is in vim's path (:set rtp?)

Check that vim is compiled with python support (vim --version should have +python).

Check that filetype plugins are loaded: :filetype should have plugin:ON in its output. If they aren't, add filetype plugin on to your .vimrc.

That should be enough to ensure that merlin is indeed running (or to identify the problem, if it wasn't).

TODO: continue.