CHANGELOG.txt

1.0.3: (doi: 10.5281/zenodo.165134)
 - obspy.core:
   * properly pass through kwargs specified for Trace.plot() down to the
     low-level plotting routines (e.g. events were not shown properly in
     dayplot of a trace, see #1566)
   * properly pass through kwargs from Stream.detrend() to Trace.detrend()
     (see #1607)
   * Correctly splitting masked arrays in Trace objects for a couple of corner
     cases (see #1650, #1653).
 - obspy.core.event.source:
   * Fix `farfield` if input `points` is a 2D array. (see #1499, #1553)
 - obspy.clients.earthworm:
   * Better end of stream detection. (see #1605)
   * More efficient unpacking of server response. (see #1680)
 - obspy.clients.neic:
   * Better end of stream detection. (see #1563)
 - obspy.clients.seedlink:
   * Better end of stream detection. (see #1605)
 - obspy.clients.seishub:
   * Fix wrong kwargs `first_pick` and `last_pick` in
     `Client.event.get_list()`. (see #1661)
 - obspy.io.mseed:
   * ObsPy can now also read (Mini)SEED files with noise records. (see #1495)
   * ObsPy can now read records with a data-offset of zero. (see #1509, #1525)
   * ObsPy can now read MiniSEED files with micro-second wrap arounds.
     (see #1531)
   * ObsPy can now read MiniSEED files with no blockette 1000. (see #1544)
   * ObsPy now always writes Blockette 100 if sampling rate accuracy is
     otherwise lost. (see #1550)
   * obspy.io.mseed.util.set_flags_in_fixed_header() now works with Python 3
     and also for files with Blockette 100 (see #1648).
 - obspy.io.quakeml:
   * write StationMagnitude.residual even when it is zero (see #1625)
   * read & write Event.region
 - obspy.io.sac:
   * `SACTrace.lpspol` and `lcalda` are `True` and `False` by default, when
      created via `SACTrace.from_obspy_trace` with a `Trace` that has no SAC
      inheritance. (see #1507)
   * Reference time not written to SAC file when made from scratch
     (see #1575)
 - obspy.io.sh:
   * Fix writing of long headers for python3
   * Whitespace in header fields is not ignored anymore (see #1552)
 - obspy.io.stationxml:
   * Datetime fields are written with microseconds to StationXML if
     microseconds are present. (see #1511)
 - obspy.io.zmap:
   * Use first origin/magnitude when writing to zmap if no origin/magnitude is
     set as preferred. (see #1569)
   * Parse origin time seconds as a float to avoid losing accuracy (see #1573)
 - obspy.signal:
   * PPSD: fix warning message on Python 3 that gets shown when waveforms and
     metadata mismatch (see #1506)
 - obspy.taup:
   * Allow for more than 10 phases with identical names (can happen for certain
     custom models, see #1593).

1.0.2: (doi: 10.5281/zenodo.49636)
 - obspy.core:
   * Added workaround for numpy issue where many FFTs of various lengths fill
     a cache that never gets cleared, effectively creating a memory leak
     (see #1424).
   * Trace.filter and Stream.filter don't work on masked arrays anymore because
     it produced unpredictable results due to the un-initialized data-chunk.
     The uninitialized masked gap is now also initialized to np.nan in case
     of floating point data which and a consistent fill value in case of
     integer data. (see #1363)
 - obspy.clients.fdsn:
   * Fixing issue with location codes potentially resulting in unwanted data
     to be requested. (see #1422)
   * Included low-gain seismometers in default channel filters in
     mass-downloader, also included non-oriented channels by default
     (see #1373).
 - obspy.db:
   * Fixed a bug in obspy-indexer command line script (see #1369,
     command line script was not working, probably since 0.10.0)
 - obspy.imaging:
   * Fixed a bug that leads to pressure/tension color blending when plotting
     semi-transparent DC beachball patches (i.e. with "alpha" not equal to 1,
     see #1464)
   * Fixed a bug when plotting non-DC beachball patches without fill colors
     (i.e. with "nofill=True", see #1464)
   * Fix arbitrary units in waveform section plot's offset axis, making it
     possible to add customizations to the plot afterwards (see #1382, see
     #1383)
 - obspy.io.ascii:
   * Fixed a bug that lead to wrong header information in output files when
     writing non-integer sampling rate data to SLIST or TSPAIR formats
     (see #1447)
- obspy.io.cmtsolution:
   * Make sure newer CMTSOLUTION files can also be read (see #1479).
 - obspy.io.gse2:
   * Fixed a bug that could lead to network code not present in GSE2 output
     (see #1448)
 - obspy.io.mseed:
   * Fixed a bug in obspy-mseed-recordanalyzer (see #1386)
 - obspy.io.nlloc:
   * Use geographic coordinates from the NonLinLoc Hypocenter-Phase file if
     no custom coordinate converter is provided. (see #1390)
   * Fix reading NonLinLoc Hypocenter-Phase files with more than one
     hypocenter in it. (see #1480)
   * Fix reading NonLinLoc Hypocenter-Phase files with unicode characters in
     them. (see #1483)
 - obspy.io.quakeml:
   * Fixed issue with improperly raised warnings when the same file is read
     twice. (#1376)
   * Fix writing empty network/station/channel codes in WaveformStreamID
     objects to QuakeML. (see #1483)
 - obspy.io.sac:
   * Try to set SAC distances (dist, az, baz, gcarc) on read, if "lcalda" is
     true.  If "dist" header is found, distances aren't calculated.
   * SACTrace class returns header values as native Python types instead of
     NumPy types.
   * SACTrace.iqual is no longer accepts enumerated string values, but
     arbitrary integer values. (see #1472)
   * SACTrace.read now replaces non-ASCII and null-termination characters in
     string headers with whitespace unless the "debug_strings=True" flag is
     used. (see #1432)
 - obspy.io.stationxml:
   * Always set the number attribute for poles and zeros. (see #1481)
 - obspy.signal:
   * PPSD.plot(): fix plotting of percentiles, mode and mean and setting
     period limits when using "xaxis_frequency=True" (see #1406, #1416)
   * Work around a bug in SciPy that results in wrong results for bandpass
     filter when using Nyquist frequency (or higher) as high corner of the
     passband (see #1451)
 - obspy.taup:
   * Fixing path for Pn. (see #1392)

1.0.1: (doi: 10.5281/zenodo.48254)
 - General:
   * Some methods might have unnecessarily upcasted float32 arrays to float64.
     Now methods for which it makes sense and which don't lose accuracy don't
     upcast float32 arrays. Integers are still upcasted. Trace.resample() will
     also no longer return the original dtype which might have resulted in a
     large loss of accuracy but it now always returns float64 arrays.
     (see #1302)
 - obspy.core:
   * Trace.normalize() does no longer divide by zero in case an all-zeros
     data trace is being used. (see #1343)
   * Inventory.select() and consorts now behave as expected even with empty
     child elements. (see #1126, #1348)
   * Code formatting is no longer checked for clean release versions. Thus
     updates to the linters no longer break the tests for releases.
     (see #1312)
   * remove_response(..., pre_file=None, plot=True) works again. (see #1320)
 - obspy.clients.arclink:
   * Restored ArcLink encryption support. (see #1352, #1347)
 - obspy.clients.fdsn:
   * Local URLs are now recognized as valid URLs. (see #1309)
   * Some bug fixes for the mass downloader. (see #1293, #1304)
   * The NOA node has been added to the list of known nodes.
     (see 2347a25714bc3e16068031f4b6138fafd627d34e)
 - obspy.io.sac:
   * More automatic merging of SAC and ObsPy headers. The new `obspy.io.sac`
     modules thus behaves more like the old one and more in line with
     expectations of users. (see #1285)
   * No more out of bounds errors when assigning coordinates. (see #1300)
   * The evdp header can be set again. (see #1345)
   * Correctly propagating sampling rate changes to the SAC headers.
     (see #1317)
   * Always set nvhdr, leven, lovrok, iftype to ensure valid SAC files.
     (see #1204)
 - obspy.io.xseed:
   * The Parser.get_paz() method now works with multiple blockette 53s.
     (see #1281)
 - obspy.taup
   * Fixed wrong azimuth direction for paths > 180 degrees distance (see #1289)
   * Azimuth is appended to arrivals as well (see #1289)
   * Fixed issue with taup cache function on Python 2.7. (see #1308)

1.0.0: (doi: 10.5281/zenodo.46151)
 - General:
   * Requirements have been increased to reflect latest distributions:
     * Removed support for Python 2.6.
     * Added support for Python 3.5.
     * matplotlib >= 1.1.0 is now required.
     * numpy >= 1.6.1 is now required
     * scipy >= 0.9.0 is now required
   * Reorganized the submodule structure. We provide a deprecation path so the
     old imports will continue to work for one ObsPy version.
   * Consistent naming scheme across the code base. This results in some
     functions having different names. Most things that worked with ObsPy 0.10
     will continue to work with this version, but starting with the next
     version they will fail. Pay attention to the deprecation warnings.
   * Support for additional waveform data formats:
     - Read support for the ASCII format for waveforms from the K-NET and
       KiK-net strong-motion seismograph networks.
   * Support for additional event data formats:
     - CMTSOLUTION files used by many waveform solvers.
     - ESRI shapefile write support, useful in GIS applications (see #1066)
     - Google Earth KML output.
   * Support for additional station data format:
     - The FDSN web service station text format can now be read.
     - Read support for the NIED's moment tensor TEXT format (see #1125)
     - Google Earth KML output.
     - Read support for SeisComP3 inventory files.
 - obspy.core:
   * New method for generating sliding windows from Stream/Trace windows.
     (see #860)
   * Stream/Trace.slice() now has the optional `nearest_sample` argument from
     Stream/Trace.trim().
   * Trace.remove_response() now has `plot` option to show/output a plot of all
     individual steps of instrument response removal in frequency domain
     (see #1116).
   * New method Stream/Trace.remove_sensitivity() to remove instrument
     sensitivity
   * Fix incorrect parsing of some non-ISO8601 date/time strings. (see #1215)
   * Added plotting method to Event (customizable subplots from a selection
     of map, beachball and farfield radiation plots, see #1192)
 - obspy.clients.fdsn:
   * Replace FDSN webservice shortcut `NERIES` with `EMSC` and deprecate the
     `NERIES` shortcut, will be removed in a future release (see #1146).
   * Now requests gzipped data for the XML files. Much smaller files!
   * The station service can now also be used to download files in the text
     format. This has limited information but is much faster.
   * New mass downloader to assist in downloading data across a large number
     of FDSN web services.
   * Catch invalid URLs when initialising Client and avoid confusing error
     messages (see #1162)
 - obspy.clients.filesystem.sds:
   * New client to read data from local SDS directory structure (see #1135).
   * Command line script `obspy-sds-report` to generate html page with
     information on latency, data availability percentage and number of gaps
     for a local SDS archive (see #1202)
 - obspy.clients.neries:
   * Removed the dedicated client. Data can still be accessed by using the FDSN
     client.
 - obspy.clients.syngine:
   * New client for the IRIS Syngine service to retrieve custom synthetic
     seismograms.
 - obspy.imaging:
   * Experimental support for Cartopy when plotting maps. Use the `method`
     argument to functions that plot maps to select between Basemap or Cartopy.
   * New default colormap for all plots. A backport of the new viridis colormap
     from matplotlib is available for those using older matplotlib releases.
   * Added plotting routines for farfield radiation patterns of moment tensors
 - obspy.io.kml:
   * New module for Google KML output of Inventory and Catalog objects
     (e.g. for use in Google Earth)
 - obspy.io.mseed:
   * Upgrade to libmseed 2.16
 - obspy.io.seiscomp.sc3ml:
   * New module reading SeisComP3 inventory files to ObsPy inventory objects
     (see #1182).
 - obspy.io.shapefile:
   * New module for ESRI shapefile write support (see #1066)
 - obspy.io.stationtxt:
   * New module reading the FDSN station files.
 - obspy.signal:
   * Switch to second-order sections for filters; backported from SciPy 0.16.0
     (see #1028)
   * New Lanczos interpolation/resampling (see #1101)
   * Higher order detrending methods (see #1173)
   * PPSD (see #931, #1108, #1130, #1187):
     - Algorithm for PSD computation was improved, especially affecting results
       at long periods (for detailed discussion see #931 and #1108).
     - Keywords `paz` and `parser` were removed in favor of new keyword
       `metadata`. PPSD now accepts `metadata` in a much wider range
       of formats:
          * Inventory objects (e.g. from StationXML or from FDSN webservice)
          * obspy.io.xseed Parser objects (e.g. from dataless SEED file)
          * filename of a RESP file
          * dictionary with poles and zeros information (like in
            prior versions)
       Most old codes should still work, issuing a deprecation warning, but
       old code that specifies *both* `paz` and `parser` keywords will raise
       an exception.
     - Whenever possible (i.e. when using for `metadata` an Inventory,
       a Parser or a RESP file), response calculation now takes into account
       the full response (all stages) as opposed to only using the poles and
       zeros response stage (as was done in previous versions when using a
       Parser object). When using a poles and zeros dictionary response
       calculation is unchanged (as no information on other stages is
       available, of course).
     - PPSD now stores the psd for each time segment that gets processed,
       instead of only storing the stacked histogram. That way, differing
       custom stacks with various selection criteria (e.g. time of day, by
       weekday, etc.) can now be made from the same processed data
       (see #1130).
     - New save/load mechanism using numpy .npz binary format that circumvents
       some problems with the old pickle mechanism:
       `PPSD.save_npz()` and `PPSD.load_npz()` (and `PPSD.add_npz()` to add
       data from additional npz files)
     - Change default colormap to new obspy default sequential colormap
       (matplotlibs new viridis colormap). The old PQLX colormap is provided by
       `obspy.imaging.cm.pqlx` and can be used with
       `PPSD.plot(..., cmap=...)`.
     - new option `PPSD.plot(..., cumulative=True)` for a cumulative plot of
       the histogram, i.e. a non-exceedence percentage visualization, similar
       to the `percentile` option.
     - x axis in `PPSD.plot()` can be switched to frequency in Hz with
       `PPSD.plot(..., xaxis_frequency=True)` (see #1130)
     - changes to special handling of rotational: now handled by kwarg
       `special_handling="ringlaser"` (kwarg `is_rotational_data` is
       deprecated, see #916)
     - special handling option for hydrophone data (no differentiation, see
       #916)
     - bin width on frequency axis can now be controlled using
       `PPSD(..., frequency_bin_width_octaves=...)` (in fractions of octaves,
       default is the old fixed setting of 1/8 octaves as in PQLX)
 - obspy.taup
   * Added support for nd file format for input velocity models. Allows for
     named discontinuities at arbitrary depths allowing for less Earth like
     models (see #1147).
   * Added three methods (`get_travel_times_geo()`, `get_pierce_points_geo()`
     and `get_ray_paths_geo()`) to `TauPyModel` to handle station and
     event location data as latitude and longitude, instead of the source to
     station distance in degrees. In addition `get_ray_paths_geo()` and
     `get_pierce_points_geo()` decorate the returned pierce points and ray
     paths with the latitude and longitude of each point. Some functionality
     needs the `geographiclib` module to be installed. (See #1164.)
   * ObsPy now ships with a bunch of new velocity models in addition to the
     existing ones: `prem`, `sp6`, `1066a,b`, `herrin` (See #1196).
   * Add support for buried receivers (see #1103.)
   * Port more accurate calculation of ray parameter from Java. The effect is
     stronger for longer phases, but also corrects issues with shorter body and
     surface waves (see #986.)
   * Fix incorrect branch splitting which also caused issues for extremely
     shallow phases (see #1057.)
   * Proper cache for model splits resulting in much faster calculations if
     the source depth is repeatedly the same (see #1248).

0.10.3: (doi: 10.5281/zenodo.46150)
  - obspy.core:
    * Fix reading of multiple catalog files using globs (see #1065).
    * Fixed a bug when using
      `Trace.remove_response(..., water_level=None)`.
      With that setting that is supposed to not use any water level
      stabilization in the inversion of the instrument response
      spectrum actually the instrument response was never inverted and
      thus instead of a deconvolution a convolution was performed
      (see #1104).
    * Fixing floating point precision/rounding issue with UTCDateTime when
      initializing with floating point seconds, i.e. with microseconds,
      that could lead to microseconds being off by 1 microsecond
      (see #1096)
    * Correct gap/overlap time returned by Stream.get_gaps() and printed
      by Stream.print_gaps() which was incorrect by one time the sampling
      interval (see #1151)
    * Stream.get_gaps(): return overlaps specified in units of samples
      as negative integers (see #1151)
  - obspy.fdsn:
    * More detailed error messages on failing requests (see #1079)
    * Follows redirects for POST requests (see #1143)
  - obspy.imaging:
    * fix some bugs in `obspy-scan` (see #1138)
  - obspy.mseed:
    * Blockette 100 is now only written for Traces that need it. Previously
      it was written or not for all Traces, depending on whether the last
      Trace needed it or not. (see #1069)
    * Fixed a bug that prevented microsecond accuracy for times before 1970
      (see #1102).
    * Updated to libmseed 2.17.
  - obspy.signal:
    * Bug fixed within rotate.rotate2zne(). Additionally it can now also
      perform the inverse rotation (see #1061).
    * Bug fixed in triggering. When using option `max_len_delete` and a trigger
      occurred right before the end of data, one trigger was potentially lost
      (see #1145 for details).
  - obspy.station:
    * Plotting responses across multiple channels is more robust now in
      presence of some strange channels (e.g. with zero sampling rate,
      happens e.g. for state of health channels, see #1115)
    * ObsPy no longer assumes that the StationXML namespace is the default
      namespace (see #1060).
    * Checking if a file is a StationXML file is less rigorous (and much
      faster) now (not checking strict validity against xsd schema but
      only looking for a FDSNStationXML root element, see #1114).
      This means that `read_inventory()` without explicitly specified
      format will correctly detect more files as StationXML that have very
      slight breaches of the schema but still can be interpreted as
      StationXML.
    * fix saving `xcorrPickCorrection()` results to an image file (see #1154)
  - obspy.taup:
    * Calculating arrival times for surface waves now works (see #1055)
    * Calculating arrivals for underside reflections now works (see #1089)
  - obspy.y:
    * correct misspelled name of a Y specific header field (see #1127)
  - obspy.zmap
    * Add support for time values with sub-second precision (see #1093)

0.10.2: (doi: 10.5281/zenodo.17641)
 - obspy.core:
   * Fix catalog plot with events that have no origin depth or
     origin time (see #1021)
 - obspy.datamark:
   * Fix datawide=3 and datawide=0.5 block reading (see #1016)
 - obspy.earthworm:
   * Fix Python3 compatibility problem
 - obspy.imaging:
   * Fix flipped maps due to bug in Basemap
   * Fix handling of velocity reduction in section plots with degree offsets
     (see #1029)
   * Allow section plots over existing figures by not modifying existing lines
   * Don't prematurely close waveform figure if returning its handle
 - obspy.seedlink:
   * Fix Python3 compatibility for seedlink.easyseedlink
   * Basic seedlink client: Properly timeout requests with valid station
     selection but no data available in selected time window (see #1045)
 - obspy.signal:
   * Fix return data types/values of polarization routines (see #1026)
 - obspy.station:
   * Fix URL to FDSN StationXML schema in StationXML output (see #1023)

0.10.1: (doi: 10.5281/zenodo.16248)
 - minor changes for correct distribution of official release
   tar/zipball (see #993, #994)
 - one minor encoding-related bugfix in mopad script (see #992)

0.10.0: (doi: 10.5281/zenodo.16200)
 - Highlights:
   * Python3 support
   * anaconda support
   * New formats: AH, CNV, Kinemetrics EVT, NDK, NLLOC, PDAS, ZMAP
   * ObsPy licensed under LGPL v3.0 now as a whole.
 - General:
   * Support for Python 3.3 and 3.4 in addition to 2.6 and 2.7
   * ObsPy licensed under LGPL v3.0 now as a whole.
   * More generic processing history for most Stream and Trace methods.
   * Now requires NumPy >= 1.4.0
   * Now requires SciPy >= 0.7.2
   * Tested compatibility with most major Linux distributions still
     receiving updates.
   * The next major obspy release (0.11) will drop support for:
     * Python < 2.7
     * matplotlib < 1.1
     * numpy < 1.6
     * scipy < 0.10
 - obspy.ah
   * New submodule for reading the AH (Ad Hoc) waveform format
 - obspy.arclink:
   * add support for Poles and Zeros type "B" (Analog, Hz), see #899
 - obspy.core:
   * Preview waveform plot improved: interactive updating of ticks and
     ticklabels, correct ticklabels for sub-minute zoom level (#657)
   * fixed a problem with UTCDateTime with timestamps of far future
     dates (larger than 2038, often seen in StationXML end dates,
     see #805)
   * Support for basic custom namespace tags in QuakeML I/O (see #454)
   * `interpolate()` method for Stream/Trace objects.
   * Dictionary values added to an AttribDict will now be converted to an
     AttribDict.
   * Removed custom OrderedDict backport for Python 2.6. Now relies on the one
     provided by the future package.
   * Renamed 'type' argument to 'method' in the Trace.differentiate() method.
   * Renamed 'type' argument to 'method' in the Trace.integrate() method.
     Additionally, several broken alternate methods have been removed.
   * new plugins for NonLinLoc formats for readEvents() and
     Catalog/Event.write() (see obspy.nlloc and #900)
   * The wrap_long_string utility function is deprecated. Users may use the
     textwrap module which provides similar functionality.
   * new plugin for CNV event format (used by VELEST) for
     Catalog/Event.write() (see obspy.cnv and #905)
   * better customizable control during merging traces with sub-sample shift
     of sampling points (see #980)
 - obspy.cnv:
   * new plugin to write CNV event files (used by VELEST) from
     Catalog/Event objects. (see #905)
 - obspy.css:
   * Support for little-endian binary and ASCII files (see #881).
   * Support exporting Inventory objects to CSS relations.
 - obspy.fdsn:
   * WADL files are cached per Python process.
   * Bulk station downloading using POST requests.
   * Support for FDSNWS 1.1, e.g. the `matchtimeseries` parameter for the
     station service.
 - obspy.imaging:
   * Maintain beach ball aspect ratio through optional axes argument (see
     #734)
   * Refactored Catalog.plot() into helper routine
     obspy.imaging.maps.plot_basemap() (see #753).
   * The projections of Catalog.plot() have been modified slightly to provide
     equal-area projections:
     * The `"cyl"` projection is now named `"global"`. It is now the Mollweide
       projection.
     * The '"local"` projection now uses the Albers Equal Area projection.
 - obspy.kinemetrics
   * New submodule for reading the Kinemetrics EVT waveform format
 - obspy.mseed:
   * Support for reading and writing all encodings supported by libmseed.
   * proper error reporting while reading
   * `details=True` when reading will now write to
     `Trace.stats.mseed.blkt1001.timing_quality` instead of
     `Trace.stats.mseed.timing_quality`.
   * The timing quality will now also be written to a file if it is set.
   * Non-existing values when reading with `details=True` will now be set to
     `False` instead of `-1`.
   * New utility function `obspy.mseed.util.set_flags_in_fixed_header()`
     giving the ability to overwrite flags in the fixed header of existing
     MiniSEED files.
   * The sequence number of the first record of each Trace can now be
     specified when writing MiniSEED files.
   * `obspy-mseed-recordanalyzer`:
       - Bugfix: when specifying an out-of-bounds record number, information
         about the last record in the file was displayed (see #957). Now a
         proper error message is shown and the command line script exits
         with non-zero exit code.
       - Faster reading of a single record header
       - Added option "-a" to print information of all records
   * upgrade to libmseed 2.15
 - obspy.ndk:
   * New submodule able to read NDK files from the Global CMT project.
 - obspy.neries:
   * The whole module is deprecated and will be removed with the next major
     release. To access EMSC event data please use the obspy.fdsn client
     (use `Client(base_url='NERIES', ...)`), for access to ORFEUS waveform
     data please use the obspy.fdsn client (use
     `Client(base_url='ORFEUS', ...)`) and for travel times please use
     obspy.taup.
 - obspy.nlloc:
   * new plugins to write NonLinLoc Phase observations files from
     Catalog/Event objects and to read NonLinLoc Hypocenter-Phase file into
     Catalog/Event objects. (see #900)
 - obspy.pdas:
   * read support for PDAS waveform files
 - obspy.sac:
   * New `byteorder` option for writing sac files to disk.
   * Can now read/write from/to file-like objects like io.BytesIO and open
     files.
 - obspy.seedlink:
   * bugfix: INFO responses from the IRIS ringserver are now parsed
     correctly (see #807)
   * New submodule `easyseedlink` providing an easier way to create
     SeedLink clients
   * New `Client` class providing a basic seedlink client for individual
     requests of finite time windows (i.e. non-continuous programs)
   * Fix memory leak in `SLClient` (MiniSEED record leak in packet parser,
     see #918)
 - obspy.seisan:
   * bugfix the actual data were misaligned by one
 - obspy.seishub:
   * use specified timeout in all requests to server (see #786)
   * Helper method `Client.event.getEvents()` to fetch a `Catalog` object
     from a seishub server of version 1.4.0 or higher.
 - obspy.signal:
   * Increased performance of PPSD plotting.
   * Interpolating methods. Wrappers around routines from scipy and a custom
     `weighted average slopes` method from Wiggins 1976.
   * PPSD has new methods to extract mean and mode of the histogram by
     frequency (see #804)
   * PPSD: water level in instrument correction can now be specified by user
     on PPSD initialization
   * New polarization analysis methods: flinn, vidale, pm
 - obspy.station:
   * add plotting methods (response/bode, location maps) to
     Inventory/Station/Channel/Response objects (see #750)
   * add get_coordinates method to inventory and network objects (see #740)
   * read/write support for DataAvailability tags in StationXML files.
   * write support for SACPZ ASCII representation of channel responses.
 - obspy.taup:
   * Replaced Fortran implementation with much more powerful Python port of
	 Java TauP. This enabled us to drop all Fortran code, which simplifies
     releases and builds tremendously.
 - obspy.xseed:
   * add support for Poles and Zeros type "B" (Analog, Hz), see #899
 - obspy.zmap:
   * New module which adds ZMAP read/write support
 - scripts:
   * All scripts now require argparse instead of optparse.
   * All scripts now accept -V or --version to print version information.
   * obspy-dataless2xseed: -v and --version options are renamed to -x and
     --xml-version to not conflict with above option.
   * obspy-indexer: Options have been modified or amended slightly:
     * --data is a new alias to -d.
     * --db-uri is a new alias to -u.
     * --log is a new alias to -l.
     * --poll-interval is a new alias to -i.
     * --recent is a new alias to -r.
     * -a is a new alias to --all-files.
     * -f is a new alias to --force-reindex.
     * -H is a new alias to --host.
     * -p is a new alias to --port.
     * --check_duplicates is renamed to --check-duplicates.
     * --drop_database is renamed to --drop-database.
     * --mapping_file is renamed to --mapping-file.
     * --run_once is renamed to --run-once.
   * obspy-mopad: Options have been modified or amended slightly:
     * convert subcommand:
       * No changes.
     * decompose subcommand:
       * --input_system is renamed to --input-system.
       * --output_system is renamed to --output-system.
     * gmt subcommand:
       * --show_1fp is renamed to --show-1fp.
       * --show_isotropic_part is renamed to --show-isotropic-part.
     * plot subcommand:
       * --basis_vectors is renamed to --basis-vectors.
       * --full_sphere is renamed to --full-sphere.
       * --input_system is renamed to --input-system.
       * --lines_only is renamed to --lines-only.
       * --output_file is renamed to --output-file.
       * --pa_system is renamed to --pa-system.
       * --pressure_colour is renamed to --pressure-colour.
       * --show1fp is renamed to --show-1fp.
       * --show_isotropic_part is renamed to --show-isotropic-part.
       * --tension_colour is renamed to --tension-colour.
   * obspy-plot: --format option is accepted as an alias of -f.
   * obspy-print: Options have been modified or amended slightly:
     * --format is a new alias of -f.
     * --nomerge is renamed to --no-merge.
   * obspy-runtests: -a option is accepted as an alias of --all.
   * obspy-scan: Options have been modified or amended slightly:
     * --endtime is renamed to --end-time.
     * --event-times is renamed to --event-time. --event-time may be specified
       multiple times.
     * --ids is renamed to --id. --id may be specified multiple times.
     * --nox is renamed to --no-x.
     * --nogaps is renamed to --no-gaps.
     * --starttime is renamed to --start-time.

0.9.2: (doi: 10.5281/zenodo.10648)
 - general:
   * fix installation on CygWin (see #755)
 - obspy.core:
   * bugfix: Input/Output to/from QuakeML was missing Amplitude
     elements (see #763)
   * fixing very slow response removal for some magic bad values of npts
     (see #715)
   * extend remove_response for polynomial responses
     (thanks to Sebastien/bonaime, see #566)
 - obspy.datamark:
   * bugfix: channel code now correctly read (4 hex char)
   * bugfix: channels can have different sampling rate
   * improvement: datawide 0.5 (4 bits) encoding now supported
   * century of data can now be specified
 - obspy.fdsn:
   * time out errors get raised properly now. timeout can be specified at
     Client initialization now. (see #717)
   * for advanced users: endpoints of any particular service can now be
     specified explicitly (see #754)
   * new known FDSN providers: 'ORFEUS', 'GFZ', 'NERIES'
   * more robust WADL parser
   * the `attach_response=True` argument now uses a faster approach to
     download the station data
 - obspy.imaging:
   * Fixing waveform plotting.
 - obspy.sac:
   * SAC files with two digit year header field are now interpreted as
     "19xx", same as done by SAC (see #779)
 - obspy.seedlink:
   * bugfix: different instances of a SeedLink connection had a shared
     state (see #561)
   * multiple smaller bugfixes (see #777)
   * trailing null characters are now stripped from INFO responses (see #778)
 - obspy.seg2:
   * numbers are now also recognized as months
   * now filters non-printable chars from the header enabling it to read some
     more files
 - obspy.signal:
   * the TF misfits now correctly use logarithmic axes instead of scaling an
     image
 - obspy.station:
   * some bugfixes in the obspy.station object classes (see #710)
   * more robust writing of StationXML in case of missing elements
 - obspy.taup:
   * bugfix: avoid a bug that caused multiple calls to taup to result in
     spurious unexpected results (see #728)

0.9.0:
 -  general:
   * Added mock testing library.
 - obspy.arclink:
   * user keyword is now required during client initialization
 - obspy.core:
   * Stream/Trace.attach_response(): convenience method to attach response to
     traces from inventories.
   * new method Stream/Trace.remove_response() to remove instrument response
     from Response object attached to trace(s), e.g. after parsing a
     StationXML file. Similar to Stream/Trace.simulate(seedresp=...) for
     using a Parser object (from dataless or xseed) or RESP file, but less
     cluttered parameters and without the simulating a different instrument
     part.
   * Updated event classes to QuakeML 1.2 final.
   * Moved obspy.core.event.validate() to obspy.core.quakeml.validate()
   * The writeQuakeML() function, also accessible through
     Catalog.write(..., format="quakeml"), now has an optional keyword
     argument 'validate'. If True, the resulting QuakeML file will be
     validated against the QuakeML schema before being written. An
     AssertionError will be raised in case the validation fails.
   * validation of QuakeML against official schema working now
   * renamed obspy.core.util.types into obspy.core.util.obspy_types (#595)
   * new parameter replace for Enums which allows definition of replaceable
     keywords (fixes #531)
   * Trace.split() will return a stream object containing traces with unmasked
     arrays
   * trim(pad=True, fill_value=xxx) will return a NumPy ndarray as stated in
     the API documentation (#540)
   * read() supports now tar und zip archives and variants (tar.gz, tar.bz2)
   * new options for Stream/Trace.taper() to control the length of the
     tapering for all windowing functions and perform one-sided tapering
   * Many Stream and Trace methods are now chainable, e.g. st.taper().plot()
   * when using Stream/Trace.simulate(seedresp={...})) parameter "date" can
     now be omitted, start time of each trace is used for response lookup then
   * when using Stream/Trace.simulate(seedresp={...})) for parameter
     "filename" instead of the path to a local file now also can be provided
     either a file-like object with RESP information or an obspy.xseed.Parser
     object (e.g. created reading a dataless SEED file).
   * fix Stream.select() when using values like "" or 0, e.g.
     Stream.select(location="") or when filtering by component with a channel
     code less than 3 characters long (now these traces will be omitted from
     the result when filtering by component).
   * fix a bug when merging valid data into a masked trace (see #638)
   * event.ResourceIdentifier objects are now initialized with a QuakeML
     conform string by default, i.e. if no custom prefix is provided during
     initialization.
   * event.ResourceIdentifier.resource_id attribute was renamed to
     event.ResourceIdentifier.id
   * event.ResourceIdentifier now was has a method regenerate_uuid() that
     allows the random hash part to be regenerated for resource identifiers
     with no fixed id string (can be useful to generate a new hash if the
     referred object changes).
   * added a new test that asserts that the whole codebase is valid according
     to the flake8 tool.
   * inverse filtering of catalogs.
   * bugfix: Trace.simulate() now passes the SEED network, station, location,
     and channel identifiers to evalresp.
   * added command line script "obspy-print" to print information on local
     waveform files
   * check if ndim == 1 when setting Trace.data and raise if necessary,
     see #695
   * change waveform_id parameter in obspy.core.event.FocalMechanism to list
     of WaveformStreamID as specified in QuakeML docs (#633)
 - obspy.css:
   * new module for CSS (Center for Seismic Studies) format
   * currently read support for waveform data
 - obspy.db:
   * obspy-indexer script uses from now on hash symbols (#) instead
     of pipe (|) for features because pipe has a special meaning on
     most operating systems
 - obspy.fdsn:
   * new client module to access servers based on the FDSN web service
     definition (https://www.fdsn.org/webservices/)
 - obspy.gse2:
   * read/write STA2 header line which is officially mandatory but in
     pratice often not used
 - obspy.imaging:
   * more options to customize day plots
   * dayplot now plots matching picks (station, network, location) if a list
     of event objects is provided using the `events` kwarg.
   * obspy-scan: new option --print-gaps
   * added plotting of record sections
   * automatic merging can be disabled for obspy-plot
 - obspy.pde:
   * new module for reading NEIC PDE bulletin files into an obspy catalog
     object. Only the "mchedr" format (file format revision of February 24,
     2004) is supported.
 - obspy.realtime:
   * two new processing plugins (offset, kurtosis)
 - obspy.seg2:
   * adding read support for SEG2 data format code 1 and 2
     (signed 16bit/32bit integer)
 - obspy.segy:
   * fix a bug in plotting (see #689)
   * Removed the SEG Y benchmark plots. Now part of obspy/apps.
 - obspy.signal:
   * adding cross correlation single-station similarity checking with
     master event templates to coincidence trigger
   * new function for rotating arbitrarily oriented components to vertical,
     north, and east.
   * add PPSD support for segments of arbitrary length
   * default bin width of PPSD is changed to 1dB. This is the value used by
     McNamara and Buland 2004.
   * fix a bug when using evalresp with RESP files with very short epochs.
     see #631.
   * for seisSim(seedresp={...})) for parameter "filename" instead of the
     path to a local file now also can be provided either a file-like
     object with RESP information or an obspy.xseed.Parser object
     (e.g. created reading a dataless SEED file).
   * seisSim(seedresp={...}): the seedresp dictionary now requires network,
     station, location, and channel keys.
   * removed deprecated psd module - use spectral_estimation module instead
   * removed deprecated sonic function - use array_processing function instead
   * corrected function signature of c_sac_taper
 - obspy.station:
   * adding support for FDSN StationXML
 - obspy.mseed:
   * new kwarg arguments for reading mseed files: header_byteorder and
     verbose
   * libmseed v2.12
 - obspy.neic:
   * new module to access data from CWB QueryServer run at the National
     Earthquake Information Center (NEIC) in Golden, CO USA.
 - obspy.y:
   * adding read support for Nanometrics Y file format
 - scripts:
   * obspy-plot: new option "-o" to output plot to file instead of opening
     a window

0.8.4
 - bugfixes to make ObsPy work with the latest Python 2.x and NumPy releases
 - critical bugfixes for the waveform plotting and the xml wrapper
 - bugfix so that copy.deepcopy() works with the obspy.core.stream.Stream
   class
 - fixing some imports

0.8.3:
 - circumventing an issue in the current libmseed release that can lead to
   some float values being read in wrongly

0.8.2:
 - fixing a bug in plotting methods of Trace and Stream
 - stream/trace.plot(type="dayplot") can display event information now

0.8.1:
 - fixing a bug parsing QuakeML from a StringIO object using xml and
   autodetection

0.8.0:
 - version numbering: one single, common version number for ObsPy now.
   Use "import obspy; print obspy.__version__"
 - discontinuing Python 2.5 support
 - most important classes/functions can be imported like "from obspy import
   ...", currently: read, Trace, Stream, UTCDateTime and readEvents
 - obspy.arclink:
   * refactored attributes in getPAZ to stick better with the SEED standard
 - obspy.core:
   * fixing preview generation for sampling rates containing floats
   * fixing deprecated_keywords decorator for the case of removed keywords
   * fixing SLIST and TSPAIR reading/writing of empty traces or traces
     containing only one or two data points
   * adding taper() method to Trace/Stream using cosTaper of ObsPy and also
     all scipy windowing functions
   * adding cutout() method to Stream
   * removed all deprecated UTCDateTime methods
   * adding a class and script to determine flinn-engdahl regions for given
     longitude and latitude
   * adding rotate() method to Stream wrapping rotate functions in
     obspy.signal
 - obspy.imaging:
   * obspy-scan: adding options to control start/endtime and channels, adding
     options to not plot gaps and reducing file size for plots considerably.
 - obspy.iris:
   * many services have been discontinued on the server side. Use obspy.fdsn
     instead for discontinued services.
   * still existing services now are distinguished by a major version of the
     particular service (like obspy.fdsn).
 - obspy.mseed:
   * Bugfix writing traces containing one or two samples only
   * writeMSEED emits an UserWarning while writing an empty trace
 - obspy.sac:
   * fixing SAC and SACXY reading/writing of empty traces or traces containing
     only one or two data points
   * new debug_headers flag for reading SAC files in order to extract all
     header variables (issue #390)
 - obspy.segy:
   * unpack SEGYTrace.data on-the-fly patch contributed Nathaniel Miller
   * fixing a bug related to negative values in trace header
 - obspy.seishub:
   * adding kwarg to control number of retries for failing requests
   * adding obspy.xseed as dependency (in setup.py and debian/control)
   * changing obspy.client.station.getPAZ() call syntax to use seed_id
     (args/kwargs)
   * adding local caching of requests for PAZ and coordinates to avoid
     repeated requests to server
 - obspy.sh:
   * file extension 'QBN' not added twice anymore if data_directory was set
   * fixing SH_ASC and Q reading/writing of empty traces or traces containing
     only one or two data points
 - obspy.signal:
   * module psd has been refactored to spectral_estimation
   * adding function for cross correlation pick correction
   * removing pitsa-compatibility in response function calculation
     (no complex conjugate)
   * preventing a possible duplicated overall sensitivity removal in seisSim
     when using the option seedresp
   * adding optimized C-code for classic STALTA. Runs approximately, 1000x
     faster than pure python code. It has now the same order of speed as the
     recursive STALTA
   * new CAPON method for array_analysis / array_processing
   * sonic was renamed to array_processing, sonic is now deprecated
 - obspy.xseed:
   * fixed a bug with Dataless to XSEED conversion using split_stations=True
   * fixed a bug affecting getPAZ() and getCoordinates() when selecting
     specific channels from complex dataless files
     (see: https://github.com/obspy/obspy/issues/412)
   * added getInventory() method to the Parser object. Returns a dictionary
     about the contents of the Parser object. This is also integrated in the
     string representation and makes it more informative.
   * allow parsing of oversized VariableString from SEED, but warn and cut
     string to max_length at writing SEED (#701)
 - obspy.mseed:
   * adding experimental details option, which extracts timing quality and
     info on the calibration

0.7.1:
 - obspy.arclink:
   * proper DeprecationWarning for deprecated keywords for
     Client.getWaveform()
 - obspy.core:
   * fixing negative azimuths returned by gps2DistAzimuth [#375]

0.7.0:
 - obspy.arclink:
   * requesting time spans (using 'starttime' and 'endtime' keywords) are
     deprecated in Client.getPAZ() and Client.getMetadata() - use 'time'
     instead
   * output format has changed for Client.getPAZ(..., time=dt)
   * 'getCoordinates' and 'getPAZ' keywords are deprecated in
     Client.getWaveform() - use 'metadata' instead
   * Client.getWaveform(..., metadata=True) will return both keywords as well
     as PAZ - inventory request is done only once per request -> huge
     performance improvement compared to previous implementation
   * traces requested via Client.getWaveform(..., metadata=True) covering
     multiple instrumentations will be split and the correct PAZ are appended
 - obspy.core:
   * new Catalog/Event classes
   * read/write support for QuakeML files
   * new resample method for Trace and Stream object
   * Trace.__mod__ (splits Trace into Stream containing traces with num
     samples)
   * Trace.__div__ (splits Trace into Stream containing num traces)
   * implementation of __mul__ method for Trace and Stream objects
   * new formatSeedLink method for UTCDateTime object
   * new split method for transforming streams containing masked arrays into
     contiguous traces
   * new util.xmlwrapper module for uniform API for Python's default xml and
     lxml
   * new obspy.core.util.types.Enum class
   * refactored obspy.core.util.ordereddict into obspy.core.util.types
   * refactored kilometer2degrees and locations2degrees from obspy.taup into
     obspy.core.util.geodetics
   * adding 'equal_scale' option to plot() method
   * removing __hash__ fixture for Stream and Trace
   * stream.select works now case insensitive
   * support for initialization of UTCDateTime from numpy.string_ types
   * new dtype parameter on read method allows converting data into given
     dtype
   * AttribDict may now be initialized with (key, value) kwarg pairs, e.g.
     AttribDict(a=1, b=2).
    * changed many setter/getter in UTCDateTime to private methods, e.g.
      _getDate
   * added UTCDateTime.DEFAULT_PRECISION
   * import of an unsupported waveform will result into a TypeError [#338]
   * added compatibility methods for AttribDict and UTCDateTime
   * retaining trace order in stream while merging
   * deprecated_keywords decorator may warn and ignore keywords by setting the
     keyword mapping to None
 - obspy.db:
   * added client for a database created by obspy.db
   * adapting to changes in obspy.core.util.base version 0.6.0 and above
 - obspy.gse2:
   * bugfix for buffer overflow in test_readDos
   * bugfix checksum calculation of GSE2/GSE1
 - obspy.imaging:
   * Trace.label/Stream.label can be used to overwrite default labels
   * better support for huge/tiny y-ticks and plots containing multiple traces
   * adding 'equal_scale' option to plot() method
   * Limited localization support and the time axis(es) can be swapped.
   * traces with same id but different processing steps will not be merged
     anymore using the plot() method
   * accept a list of two values for width of beachballs (using Ellipse patch)
 - obspy.iris:
   * added low-level interface for IRIS timeseries WS
   * added low-level interface for IRIS traveltime WS
   * new Client.getEvents method able to return a ObsPy catalog object
 - obspy.mseed:
   * changing license to LGPL (same as libmseed)
   * libmseed 2.7 (fixes sampling rates above 32,767 Hz)
   * adding read/write support for very large and very small sampling rates
     using blockette 100 in MiniSEED
   * new obspy-mseed-recordanalyzer script for analyzing SEED files via
     console
   * new obspy.mseed.util.shiftTimeOfFile() function for shifting
     the time of all records without interfering with the rest of the file.
 - obspy.neries:
   * new format 'catalog' for getEvents, getEventDetail and getLatestEvents
     methods - deprecating old format defaults
 - obspy.sac:
   * bugfix for SAC files containing null terminated strings
 - obspy.seg2:
   * bugfix in parsing starttime from seg2 header
 - obspy.signal:
   * adding toolbox to calculate Time-Frequency Misfits
   * fixed bug in calculation of time derivatives
   * fixing a misleading entry point for trigger, adding a missing one
   * adding coincidence triggering routine
 - obspy.taup:
   * deprecated kilometer2degrees and locations2degrees - one can find those
     methods on obspy.core.util now
 - obspy.xseed:
   * fixed a bug with exactly one pole or one zero in response information

0.1.0:
 - obspy.datamark:
   * read support
 - obspy.realtime:
   * initial release