Update MagicHome-LED-strip-controller.md

Author: blakadder

docs/devices/MagicHome-LED-strip-controller.md

@@ -7,7 +7,8 @@
 
 Board is essentially a ESP-12S  (or ESP-2M) with necessary voltage converters, little bit of flash, 3 or 4 MOSFETs to drive LED strip (depending on the model), connector for LED strip and optional IR receiver. 
 
-**There are new versions of these boards that use a different chip, Tasmota cannot be installed on them. Before anything, make sure your board has a compatible chip. https://www.reddit.com/r/Esphome/comments/kknqpu/flashing_nonstandard_magichome_controller/** 
+!!! warning
+    There are new versions of these boards that use an incompatible module, Tasmota cannot be flashed on them! Before anything, make sure your board has a compatible chip. 
 
 Module is powered by 12V that is used to power LED strip as well. RGB models are declared as 144W, RGBW models as 192W.