Skip to content

Latest commit

 

History

History
336 lines (286 loc) · 9.79 KB

functions.md

File metadata and controls

336 lines (286 loc) · 9.79 KB
Raw

Experimental functions

Experimental functions are available for use but currently not recommend for use in production environments (unless critical for your use case). They are not officially supported by New Relic.

inherit_attributes

When you use start_key to start processing a nested payload, you may want to inherit the attributes above it as well. That's what inherit_attributesis for. Note: only supported when start_key is used.

Consider a service that returns the following payload:

{
    "id": "eca0338f4ea31566",
    "leaderInfo": {
        "leader": "8a69d5f6b7814500",
        "startTime": "2014-10-24T13:15:51.186620747-07:00",
        "uptime": "10m59.322358947s",
        "abc":{
            "def":123,
            "hij":234
        }
    },
    "name": "node3"
}

You could include the top-level attributes in the sample:

name: example
apis:
    - name: someService
      url: http://some-service.com/status
      start_key: 
        - leaderInfo>abc

Which would give you a result similar to:

"metrics": [{
  "event_type": "someServiceSample",
  "id": "eca0338f4ea31566",
  "leaderInfo.abc.def": 1,
  "leaderInfo.abc.hij": 2,
  "leaderInfo.leader": "a8a69d5f6b7814500",
  "leaderInfo.startTime": "2014-10-24T13:15:51.186620747-07:00",
  "leaderInfo.uptime": "10m59.322358947s",
  "name": "node3"
}]

metric_parser

metric_parser enables setting rates and deltas. It expects an exact match to avoid any conflicts, though the mode attribute can be set as shown below to automatically match multiple keys. mode supports regex, suffix, prefix and contains for matching.

Flex automatically attempts to set a namespace as required for your attributes; else you can namespace based on existing attributes or a custom attributes.

See the metric_parser example below:

name: redisFlex
apis:
  - name: redis
    commands:
      - run: (printf "info\r\n"; sleep 1) | nc 127.0.0.1 6379 # or even ### run: "redis-cli -h 127.0.0.1 -p 6379 info" ### (depends on redis-cli)
        split_by: ":"
    remove_keys: # remove any keys that contain any of the following strings
      - human
    snake_to_camel: true
    perc_to_decimal: true
    sub_parse:
      - type: prefix
        key: db
        split_by:
          - ","
          - "="
    custom_attributes:
      myCustomAttr: theValue
    metric_parser:
      metrics:
        totalNetInputBytes: RATE
        rate$: RATE
      namespace: # you can create a namespace with a custom attribute, or chain together existing attributes, else it will default
        # custom_attr: "mySpecialRedisServer"
        existing_attr:
          - redisVersion
          - tcpPort
      # mode: regex ### switches metric parser to use a defined mode rather then exact match, options include "regex" ,"suffix", "prefix" & "contains"

pagination

See the inline comments on how to use pagination.

---
name: paginationTest
apis:
  - event_type: paginationTest
    url: https://reqres.in/api/users?page=${page}&per_page=2
    # url: https://reqres.in/api/users?page=${page}&per_page=${limit}
    pagination:
      page_start: 1 ### select the page to start from
      # increment: 10 ### number to increment by // default 1
      # page_limit: 2 ### can be used as a page offset place ${limit} into the url
      # page_limit_key: per_page ### select a key in the payload to set the page limit / offset
      # page_next_key: next_page ### select a key in the payload to set the next page to walk too
      # max_pages: 3 ### set max number of pages to walk
      # max_pages_key: total_pages ### select a key in the payload to set the max pages to walk
      # next_cursor_key: nextCursor ### if using cursor pagination look for this key instead, will get substituted into ${page}
      ############################# you will need to also set a ?flex=${page} query parameter for tracking eg. https://reqres.in/api/users?flex=${page}
      # next_link_key: nextLink ### look for specified key to navigate to next
      ############################# you will need to also set a ?flex=${page} query parameter for tracking eg. https://reqres.in/api/users?flex=${page}
      payload_key: data ### select a key in the payload to check if there is still content being returned

pluck_numbers

Retrieves any attribute with a number value and assigns it to another attribute. Any value that contains numbers is automatically plucked out. If no number is found, the value is left as is.

Consider the following payload:

{
    "id": "eca0338f4ea31566",
    "leaderInfo": {
        "leader": "8a69d5f6b7814500",
        "startTime": "2014-10-24T13:15:51.186620747-07:00",
        "uptime": "10m59.322358947s",
        "abc": {
            "def": 123,
            "hij": 234
        }
    },
    "name": "node3"
}

You could retrieve the values from leaderInfo.abc.def and leaderInfo.abc.hij:

name: squidFlex
apis:
  - name: squidMgrUtilization
    commands:
      - run: squidclient -v mgr:utilization
        split_by: " = "
        line_limit: 88 # stop processing at this line as we only care about last 5 minute metrics
    pluck_numbers: true # find any numbers within a string and pluck them out
    value_parser:
      time: "[0-9]+" # use regex to find any time values, and pluck the first found integer out with the value_parser

rename_samples

Uses a regular expression to rename a sample (event_type attribute) if the current sample has a key that matches. In the example below, if the db key is found, it's renamed redisDbSample; if cmd is found, rename to redisCmdSample.

---
name: redis
apis:
  - name: redis
    url: http://127.0.0.1:8887/metrics
    prometheus:
      enable: true
    rename_samples:
      db: redisDbSample
      cmd: redisCmdSample

sample_include_match_all_filter

Similar to sample_include_filter but creates samples only when all the specified filter keys and values are present. This function is mutually exclusive with sample_include_filter: if one is specified the other is ignored.

Consider a service that returns the following payload:

{
    "usageInfo": [
        {
            "incidentCode": 77,
            "serviceId": "compute"
        },
        {
            "incidentCode": 143,
            "serviceId": "compute"
        }
    ]
}

You may only want to have "serviceId": "compute" in the output sample when "incidentCode": 77:

name: example
apis:
    - name: someService
      url: http://some-service.com/samples
      sample_include_match_all_filter:
          - serviceId: "compute"
          - incidentCode: 77

Which would return the following:

"metrics": [
  {
    "api.StatusCode": 200,
    "incidentCode": 77,
    "serviceId": "compute",
    "event_type": "usageInfoSample",
    "integration_name": "com.newrelic.nri-flex",
    "integration_version": "Unknown-SNAPSHOT",
    "quantities": 10
  },
]

sample_keys

Creates different samples based on a key from a larger object. There can be cases where you can receive a payload where you have subobjects identified by a key (like a map), and you want to extract them as a different sample. You can target a nested key and split them out into samples.

Consider the following payload:

{
    "followers": {
        "6e3bd23ae5f1eae0": {
            "counts": {
                "fail": 0,
                "success": 745
            },
            "latency": {
                "average": 0.017039507382550306,
                "current": 0.000138,
                "maximum": 1.007649,
                "minimum": 0,
                "standardDeviation": 0.05289178277920594
            }
        },
        "a8266ecf031671f3": {
            "counts": {
                "fail": 0,
                "success": 735
            },
            "latency": {
                "average": 0.012124141496598642,
                "current": 0.000559,
                "maximum": 0.791547,
                "minimum": 0,
                "standardDeviation": 0.04187900156583733
            }
        }
    },
    "leader": "924e2e83e93f2560"
}

You could create samples based on each of the followers:

name: example
apis:
  - name: startKey
    url: http//some-service.com/status
    sample_keys:
      # create samples distinguished by the follower id
      followerSample: followers>follower.id

save_output

Applies to Description
API Saves sample output to an existing directory as JSON.

Example

Consider a service that returns the following payload:

{
    "id": "eca0338f4ea31566",
    "leaderInfo": {
        "leader": "8a69d5f6b7814500",
        "startTime": "2014-10-24T13:15:51.186620747-07:00",
        "uptime": "10m59.322358947s",
        "abc": {
            "def": 123,
            "hij": 234
        }
    },
    "name": "node3"
}

You could save the output as results.json in /flexConfigs:

name: example
apis:
    - name: someService
      url: http://some-service.com/status
      save_output: "./flexConfigs/results.json"

Files are saved with 0644 file permissions.

sub_parse

Splits nested values out from one line. For example, db0:keys=1,expires=0,avg_ttl=0 to db0.keys = 1, db0.expires = 0, db0.avg_ttl = 0.

apis:
  - name: redis
    commands:
      - run: (printf "info\r\n"; sleep 1) | nc -q0 127.0.0.1 6379
        split_by: ":"
    sub_parse:
      - type: prefix
        key: db
        split_by:
          - ","
          - "="