Skip to content

mxbode/ESA5000SetSpeedButton

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

11 Commits
 
 
 
 
 
 

Repository files navigation

Docgreen Esa 5000 Arduino Setspeed Button

Use this arduino sketch and connect your arduino to your docgreen ESA 5000 Escooter. You can define a sequence that you have to press the powerbutton of your scooter to set a new speed limit.

Tested Boards

  • Arduino Pro Mini
  • Arduino Nano
  • ATtiny45

#ToDo ESP-01, ESP8266

Connect Your Arduino

Connect your arduino like in this project: https://Github.Com/M4gnv5/Docgreenesa5000-Dashboard 5V power and databus should now connected between the scooter and your arduino.

In generic Arduino you have to connect TX PIN throug a diode to [TR] on scooter and PIN 14 throug a diode to [SW] on scooter. Use the diode as shown in ATtiny picture below.

For ATtiny you have to connect PIN 4 throug a diode to [TR] on escooter and PIN 2 throug a diode to [SW] on escooter.

Usage

After turning on your scooter, the arduino will get powered too. Klick 6 times fast on the power button and the scooters max speed will be 30 kilometers/h. Three more times and the scooters max speed will reset to default 20 kilometers/h. You now have to turn your scooter off and on again.

Releases

No releases published

Packages

No packages published

Languages