diff --git a/GitHubConfiguration.ps1 b/GitHubConfiguration.ps1 index 944b2621..17ceacec 100644 --- a/GitHubConfiguration.ps1 +++ b/GitHubConfiguration.ps1 @@ -147,6 +147,11 @@ function Set-GitHubConfiguration .PARAMETER RetryDelaySeconds The number of seconds to wait before retrying a command again after receiving a 202 response. + .PARAMETER StateChangeDelaySeconds + The number of seconds to wait before returning the result after executing a command that + may result in a state change on the server. This is intended to only be used during test + execution in order to increase reliability. + .PARAMETER SuppressNoTokenWarning If an Access Token has not been configured, this module will provide a warning to the user informing them of this, once per session. If it is expected that this module will regularly @@ -228,6 +233,8 @@ function Set-GitHubConfiguration [int] $RetryDelaySeconds, + [int] $StateChangeDelaySeconds, + [switch] $SuppressNoTokenWarning, [switch] $SuppressTelemetryReminder, @@ -312,6 +319,7 @@ function Get-GitHubConfiguration 'LogTimeAsUtc', 'MultiRequestProgressThreshold', 'RetryDelaySeconds', + 'StateChangeDelaySeconds', 'SuppressNoTokenWarning', 'SuppressTelemetryReminder', 'TestConfigSettingsHash', @@ -659,6 +667,7 @@ function Import-GitHubConfiguration 'logTimeAsUtc' = $false 'multiRequestProgressThreshold' = 10 'retryDelaySeconds' = 30 + 'stateChangeDelaySeconds' = 0 'suppressNoTokenWarning' = $false 'suppressTelemetryReminder' = $false 'webRequestTimeoutSec' = 0 diff --git a/GitHubCore.ps1 b/GitHubCore.ps1 index 019ef6ac..0bfd7f5d 100644 --- a/GitHubCore.ps1 +++ b/GitHubCore.ps1 @@ -321,6 +321,16 @@ function Invoke-GHRestMethod } } + # Allow for a delay after a command that may result in a state change in order to + #increase the reliability of the UT's which attempt multiple successive state change + # on the same object. + $stateChangeDelaySeconds = $(Get-GitHubConfiguration -Name 'StateChangeDelaySeconds') + $stateChangeMethods = @('Delete', 'Post', 'Patch', 'Put') + if (($stateChangeDelaySeconds -gt 0) -and ($Method -in $stateChangeMethods)) + { + Start-Sleep -Seconds $stateChangeDelaySeconds + } + if ($ExtendedResult) { $finalResultEx = @{ diff --git a/Tests/Common.ps1 b/Tests/Common.ps1 index 41253602..d7ced214 100644 --- a/Tests/Common.ps1 +++ b/Tests/Common.ps1 @@ -101,9 +101,10 @@ function Initialize-CommonTestSetup Set-GitHubConfiguration -MultiRequestProgressThreshold 0 # Status corrupts the raw CI logs for Linux and Mac, and makes runs take slightly longer. Set-GitHubConfiguration -DisableUpdateCheck # The update check is unnecessary during tests. - # The number of seconds to sleep after performing some operations to ensure that successive - # API calls properly reflect previously updated state. - $script:defaultSleepSecondsForReliability = 3 + # We execute so many successive state changing commands on the same object that sometimes + # GitHub gets confused. We'll add an intentional delay to slow down our execution in an effort + # to increase the reliability of the tests. + Set-GitHubConfiguration -StateChangeDelaySeconds 3 } Initialize-CommonTestSetup diff --git a/Tests/GitHubAssignees.tests.ps1 b/Tests/GitHubAssignees.tests.ps1 index 0501f183..f9c0057a 100644 --- a/Tests/GitHubAssignees.tests.ps1 +++ b/Tests/GitHubAssignees.tests.ps1 @@ -108,10 +108,6 @@ try Context 'Adding and removing an assignee via parameters' { $issue = $repo | New-GitHubIssue -Title "Test issue" - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - It 'Should have no assignees when created' { $issue.assignee.login | Should -BeNullOrEmpty $issue.assignees | Should -BeNullOrEmpty @@ -119,10 +115,6 @@ try $updatedIssue = Add-GitHubAssignee -OwnerName $script:ownerName -RepositoryName $repo.name -Issue $issue.number -Assignee $owner.login - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - It 'Should have returned the same issue' { $updatedIssue.number | Should -Be $issue.number } @@ -155,10 +147,6 @@ try Context 'Adding an assignee with the repo on the pipeline' { $issue = $repo | New-GitHubIssue -Title "Test issue" - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - It 'Should have no assignees when created' { $issue.assignee.login | Should -BeNullOrEmpty $issue.assignees | Should -BeNullOrEmpty @@ -166,10 +154,6 @@ try $updatedIssue = $repo | Add-GitHubAssignee -Issue $issue.number -Assignee $owner.login - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - It 'Should have returned the same issue' { $updatedIssue.number | Should -Be $issue.number } @@ -202,10 +186,6 @@ try Context 'Adding an assignee with the issue on the pipeline' { $issue = $repo | New-GitHubIssue -Title "Test issue" - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - It 'Should have no assignees when created' { $issue.assignee.login | Should -BeNullOrEmpty $issue.assignees | Should -BeNullOrEmpty @@ -213,10 +193,6 @@ try $updatedIssue = $issue | Add-GitHubAssignee -Assignee $owner.login - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - It 'Should have returned the same issue' { $updatedIssue.number | Should -Be $issue.number } @@ -249,10 +225,6 @@ try Context 'Adding an assignee with the assignee user object on the pipeline' { $issue = $repo | New-GitHubIssue -Title "Test issue" - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - It 'Should have no assignees when created' { $issue.assignee.login | Should -BeNullOrEmpty $issue.assignees | Should -BeNullOrEmpty @@ -260,10 +232,6 @@ try $updatedIssue = $owner | Add-GitHubAssignee -OwnerName $script:ownerName -RepositoryName $repo.name -Issue $issue.number - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - It 'Should have returned the same issue' { $updatedIssue.number | Should -Be $issue.number } diff --git a/Tests/GitHubContents.tests.ps1 b/Tests/GitHubContents.tests.ps1 index a52ed473..24082ac8 100644 --- a/Tests/GitHubContents.tests.ps1 +++ b/Tests/GitHubContents.tests.ps1 @@ -37,10 +37,6 @@ try BeforeAll { # AutoInit will create a readme with the GUID of the repo name $repo = New-GitHubRepository -RepositoryName ($repoGuid) -AutoInit - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } AfterAll { @@ -262,12 +258,7 @@ try Describe 'GitHubContents/Set-GitHubContent' { BeforeAll { $repoName = [Guid]::NewGuid().Guid - $repo = New-GitHubRepository -RepositoryName $repoName -AutoInit - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } Context 'When setting new file content' { diff --git a/Tests/GitHubIssues.tests.ps1 b/Tests/GitHubIssues.tests.ps1 index 1cff5d0c..6e6808b9 100644 --- a/Tests/GitHubIssues.tests.ps1 +++ b/Tests/GitHubIssues.tests.ps1 @@ -161,9 +161,6 @@ try for ($i = 0; $i -lt 4; $i++) { $newIssues += New-GitHubIssue -OwnerName $script:ownerName -RepositoryName $repo.name -Title ([Guid]::NewGuid().Guid) - - # Needed to ensure that there is a unique creation timestamp between issues - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } $newIssues[0] = Set-GitHubIssue -OwnerName $script:ownerName -RepositoryName $repo.name -Issue $newIssues[0].number -State Closed @@ -550,10 +547,6 @@ try Lock-GitHubIssue -OwnerName $script:OwnerName -RepositoryName $repo.name -Issue $issue.number - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $timeline = @(Get-GitHubIssueTimeline -OwnerName $script:OwnerName -RepositoryName $repo.name -Issue $issue.number) It 'Should have an event now' { $timeline.Count | Should -Be 1 diff --git a/Tests/GitHubLabels.tests.ps1 b/Tests/GitHubLabels.tests.ps1 index 8c635f0f..1c48ce07 100644 --- a/Tests/GitHubLabels.tests.ps1 +++ b/Tests/GitHubLabels.tests.ps1 @@ -80,11 +80,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - Initialize-GitHubLabel -OwnerName $script:ownerName -RepositoryName $repositoryName -Label $defaultLabels } @@ -209,10 +204,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } AfterAll { @@ -327,10 +318,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } AfterAll { @@ -339,11 +326,6 @@ try Context 'Removing a label with parameters' { $label = $repo | New-GitHubLabel -Label 'test' -Color 'CCCCCC' - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - Remove-GitHubLabel -OwnerName $script:ownerName -RepositoryName $repositoryName -Label $label.name -Force It 'Should be gone after being removed by parameter' { @@ -353,11 +335,6 @@ try Context 'Removing a label with the repo on the pipeline' { $label = $repo | New-GitHubLabel -Label 'test' -Color 'CCCCCC' - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $repo | Remove-GitHubLabel -Label $label.name -Confirm:$false It 'Should be gone after being removed by parameter' { @@ -367,11 +344,6 @@ try Context 'Removing a label with the name on the pipeline' { $label = $repo | New-GitHubLabel -Label 'test' -Color 'CCCCCC' - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $label.name | Remove-GitHubLabel -OwnerName $script:ownerName -RepositoryName $repositoryName -Force It 'Should be gone after being removed by parameter' { @@ -381,11 +353,6 @@ try Context 'Removing a label with the label object on the pipeline' { $label = $repo | New-GitHubLabel -Label 'test' -Color 'CCCCCC' - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $label | Remove-GitHubLabel -Force It 'Should be gone after being removed by parameter' { @@ -398,10 +365,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } AfterAll { @@ -579,10 +542,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } AfterAll { @@ -657,11 +616,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $repo | Initialize-GitHubLabel -Label $defaultLabels } @@ -890,11 +844,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $repo | Initialize-GitHubLabel -Label $defaultLabels } @@ -961,11 +910,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $repo | Initialize-GitHubLabel -Label $defaultLabels } @@ -1133,11 +1077,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $repo | Initialize-GitHubLabel -Label $defaultLabels } @@ -1287,11 +1226,6 @@ try BeforeAll { $repositoryName = [Guid]::NewGuid().Guid $repo = New-GitHubRepository -RepositoryName $repositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $repo | Initialize-GitHubLabel -Label $defaultLabels $milestone = $repo | New-GitHubMilestone -Title 'test milestone' diff --git a/Tests/GitHubProjects.tests.ps1 b/Tests/GitHubProjects.tests.ps1 index 3417c1d4..ccde85d6 100644 --- a/Tests/GitHubProjects.tests.ps1 +++ b/Tests/GitHubProjects.tests.ps1 @@ -611,10 +611,6 @@ try $project = New-GitHubProject -OwnerName $script:ownerName -RepositoryName $repo.name -ProjectName $defaultRepoProject -Description $defaultRepoProjectDesc $null = Remove-GitHubProject -Project $project.id -Confirm:$false It 'Project should be removed' { - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - {Get-GitHubProject -Project $project.id} | Should -Throw } } @@ -623,10 +619,6 @@ try $project = $repo | New-GitHubProject -ProjectName $defaultRepoProject -Description $defaultRepoProjectDesc $project | Remove-GitHubProject -Force It 'Project should be removed' { - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - {$project | Get-GitHubProject} | Should -Throw } } diff --git a/Tests/GitHubRepositories.tests.ps1 b/Tests/GitHubRepositories.tests.ps1 index 5ea84b12..eb4bc666 100644 --- a/Tests/GitHubRepositories.tests.ps1 +++ b/Tests/GitHubRepositories.tests.ps1 @@ -124,11 +124,8 @@ try LicenseTemplate = $testLicenseTemplate IsTemplate = $true } - $repo = New-GitHubRepository @newGitHubRepositoryParms - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability + $repo = New-GitHubRepository @newGitHubRepositoryParms } It 'Should return an object of the correct type' { @@ -310,10 +307,6 @@ try } $templateRepo = New-GitHubRepository @newGitHubRepositoryParms - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } Context 'When creating a public repository from a template' { @@ -329,10 +322,6 @@ try } $repo = New-GitHubRepositoryFromTemplate @newGitHubRepositoryFromTemplateParms - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } It 'Should have the expected type and addititional properties' { @@ -373,10 +362,6 @@ try } $repo = $templateRepo | New-GitHubRepositoryFromTemplate @newGitHubRepositoryFromTemplateParms - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } It 'Should have the expected type and addititional properties' { @@ -419,10 +404,6 @@ try BeforeAll { $publicRepo = New-GitHubRepository -RepositoryName ([Guid]::NewGuid().Guid) $privateRepo = New-GitHubRepository -RepositoryName ([Guid]::NewGuid().Guid) -Private - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } Context 'When specify the visibility parameter' { @@ -556,10 +537,6 @@ try Context 'When getting a repository for a specified organization' { BeforeAll { $repo = New-GitHubRepository -OrganizationName $script:organizationName -RepositoryName ([Guid]::NewGuid().Guid) - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } It "Should have results for the organization" { @@ -576,11 +553,6 @@ try BeforeAll { $repo1 = New-GitHubRepository -RepositoryName ([Guid]::NewGuid().Guid) $repo2 = New-GitHubRepository -RepositoryName ([Guid]::NewGuid().Guid) - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $repos = Get-GitHubRepository -GetAllPublicRepositories -Since $repo1.id } @@ -612,10 +584,6 @@ try } $repo = New-GitHubRepository @newGitHubRepositoryParms - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } Context 'When specifiying the Uri parameter' { @@ -691,21 +659,11 @@ try It 'Should get no content using -Confirm:$false' { Remove-GitHubRepository -OwnerName $repo.owner.login -RepositoryName $repo.name -Confirm:$false - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - { Get-GitHubRepository -OwnerName $repo.owner.login -RepositoryName $repo.name } | Should -Throw } It 'Should get no content using -Force' { Remove-GitHubRepository -OwnerName $repo.owner.login -RepositoryName $repo.name -Force - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - { Get-GitHubRepository -OwnerName $repo.owner.login -RepositoryName $repo.name } | Should -Throw } } @@ -718,55 +676,31 @@ try $repo = New-GitHubRepository -RepositoryName ([Guid]::NewGuid().Guid) -AutoInit $suffixToAddToRepo = "_renamed" $newRepoName = "$($repo.name)$suffixToAddToRepo" - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } It "Should have the expected new repository name - by URI" { - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $renamedRepo = Rename-GitHubRepository -Uri ($repo.RepositoryUrl) -NewName $newRepoName -Force $renamedRepo.name | Should -Be $newRepoName } It "Should have the expected new repository name - by Elements" { - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $renamedRepo = Rename-GitHubRepository -OwnerName $repo.owner.login -RepositoryName $repo.name -NewName $newRepoName -Confirm:$false $renamedRepo.name | Should -Be $newRepoName } It "Should work via the pipeline" { - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $renamedRepo = $repo | Rename-GitHubRepository -NewName $newRepoName -Confirm:$false $renamedRepo.name | Should -Be $newRepoName $renamedRepo.PSObject.TypeNames[0] | Should -Be 'GitHub.Repository' } It "Should be possible to rename with Set-GitHubRepository too" { - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $renamedRepo = $repo | Set-GitHubRepository -NewName $newRepoName -Confirm:$false $renamedRepo.name | Should -Be $newRepoName $renamedRepo.PSObject.TypeNames[0] | Should -Be 'GitHub.Repository' } AfterEach -Scriptblock { - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - Remove-GitHubRepository -Uri "$($repo.svn_url)$suffixToAddToRepo" -Confirm:$false } } @@ -778,10 +712,6 @@ try BeforeAll -ScriptBlock { $repoName = ([Guid]::NewGuid().Guid) $repo = New-GitHubRepository -RepositoryName $repoName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } Context -Name 'When updating a repository with all possible settings' { @@ -884,10 +814,6 @@ try $repoName = ([Guid]::NewGuid().Guid) $repo = New-GitHubRepository -RepositoryName $repoName -Private - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $updateGithubRepositoryParms = @{ OwnerName = $repo.owner.login RepositoryName = $repoName @@ -944,10 +870,6 @@ try It 'Should be removable by the pipeline' { ($repo | Remove-GitHubRepository -Confirm:$false) | Should -BeNullOrEmpty - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - { $repo | Get-GitHubRepository } | Should -Throw } } @@ -983,11 +905,6 @@ try It 'Should be removable by the pipeline' { ($repo | Remove-GitHubRepository -Confirm:$false) | Should -BeNullOrEmpty - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - { $repo | Get-GitHubRepository } | Should -Throw } } @@ -1058,11 +975,6 @@ try Describe 'GitHubRepositories\Set-GitHubRepositoryTopic' { BeforeAll { $repo = New-GitHubRepository -RepositoryName ([Guid]::NewGuid().Guid) - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability - $topic = Set-GitHubRepositoryTopic -OwnerName $repo.owner.login -RepositoryName $repo.name -Name $defaultRepoTopic } @@ -1342,10 +1254,6 @@ try Describe 'GitHubRepositories\Enable-GitHubRepositoryVulnerabilityAlert' { BeforeAll { $repo = New-GitHubRepository -RepositoryName ([Guid]::NewGuid().Guid) - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } Context 'When Enabling GitHub Repository Vulnerability Alerts' { @@ -1381,10 +1289,6 @@ try Describe 'GitHubRepositories\Enable-GitHubRepositorySecurityFix' { BeforeAll { $repo = New-GitHubRepository -RepositoryName ([Guid]::NewGuid().Guid) - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } Context 'When Enabling GitHub Repository Security Fixes' { diff --git a/Tests/GitHubRepositoryForks.tests.ps1 b/Tests/GitHubRepositoryForks.tests.ps1 index b4cd6f46..e78e6b82 100644 --- a/Tests/GitHubRepositoryForks.tests.ps1 +++ b/Tests/GitHubRepositoryForks.tests.ps1 @@ -29,10 +29,6 @@ try Context 'When a new fork is created' { BeforeAll { $repo = New-GitHubRepositoryFork -OwnerName $script:upstreamOwnerName -RepositoryName $script:upstreamRepositoryName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } AfterAll { @@ -58,10 +54,6 @@ try BeforeAll { $upstream = Get-GitHubRepository -OwnerName $script:upstreamOwnerName -RepositoryName $script:upstreamRepositoryName $repo = $upstream | New-GitHubRepositoryFork - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } AfterAll { @@ -88,10 +80,6 @@ try Context 'When a new fork is created' { BeforeAll { $repo = New-GitHubRepositoryFork -OwnerName $script:upstreamOwnerName -RepositoryName $script:upstreamRepositoryName -OrganizationName $script:organizationName - - # The CI build has been unreliable with this test. - # Adding a short sleep to ensure successive queries reflect updated state. - Start-Sleep -Seconds $script:defaultSleepSecondsForReliability } AfterAll {