aclocal.m4

# generated automatically by aclocal 1.13.4 -*- Autoconf -*-

# Copyright (C) 1996-2013 Free Software Foundation, Inc.

# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
# Configure paths for SDL
# Sam Lantinga 9/21/99
# stolen from Manish Singh
# stolen back from Frank Belew
# stolen from Manish Singh
# Shamelessly stolen from Owen Taylor

# serial 1

dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
dnl
AC_DEFUN([AM_PATH_SDL],
[dnl 
dnl Get the cflags and libraries from the sdl-config script
dnl
AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
            sdl_prefix="$withval", sdl_prefix="")
AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
            sdl_exec_prefix="$withval", sdl_exec_prefix="")
AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
		    , enable_sdltest=yes)

  if test x$sdl_exec_prefix != x ; then
    sdl_config_args="$sdl_config_args --exec-prefix=$sdl_exec_prefix"
    if test x${SDL_CONFIG+set} != xset ; then
      SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
    fi
  fi
  if test x$sdl_prefix != x ; then
    sdl_config_args="$sdl_config_args --prefix=$sdl_prefix"
    if test x${SDL_CONFIG+set} != xset ; then
      SDL_CONFIG=$sdl_prefix/bin/sdl-config
    fi
  fi

  as_save_PATH="$PATH"
  if test "x$prefix" != xNONE; then
    PATH="$prefix/bin:$prefix/usr/bin:$PATH"
  fi
  AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
  PATH="$as_save_PATH"
  min_sdl_version=ifelse([$1], ,0.11.0,$1)
  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
  no_sdl=""
  if test "$SDL_CONFIG" = "no" ; then
    no_sdl=yes
  else
    SDL_CFLAGS=`$SDL_CONFIG $sdl_config_args --cflags`
    SDL_LIBS=`$SDL_CONFIG $sdl_config_args --libs`

    sdl_major_version=`$SDL_CONFIG $sdl_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    sdl_minor_version=`$SDL_CONFIG $sdl_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_sdltest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_CXXFLAGS="$CXXFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $SDL_CFLAGS"
      CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
      LIBS="$LIBS $SDL_LIBS"
dnl
dnl Now check if the installed SDL is sufficiently new. (Also sanity
dnl checks the results of sdl-config to some extent
dnl
      rm -f conf.sdltest
      AC_TRY_RUN([
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "SDL.h"

char*
my_strdup (char *str)
{
  char *new_str;
  
  if (str)
    {
      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
      strcpy (new_str, str);
    }
  else
    new_str = NULL;
  
  return new_str;
}

int main (int argc, char *argv[])
{
  int major, minor, micro;
  char *tmp_version;

  /* This hangs on some systems (?)
  system ("touch conf.sdltest");
  */
  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = my_strdup("$min_sdl_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_sdl_version");
     exit(1);
   }

   if (($sdl_major_version > major) ||
      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
    {
      return 0;
    }
  else
    {
      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
      printf("*** best to upgrade to the required version.\n");
      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
      printf("*** config.cache before re-running configure\n");
      return 1;
    }
}

],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       CXXFLAGS="$ac_save_CXXFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_sdl" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$SDL_CONFIG" = "no" ; then
       echo "*** The sdl-config script installed by SDL could not be found"
       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the SDL_CONFIG environment variable to the"
       echo "*** full path to sdl-config."
     else
       if test -f conf.sdltest ; then
        :
       else
          echo "*** Could not run SDL test program, checking why..."
          CFLAGS="$CFLAGS $SDL_CFLAGS"
          CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
          LIBS="$LIBS $SDL_LIBS"
          AC_TRY_LINK([
#include <stdio.h>
#include "SDL.h"

int main(int argc, char *argv[])
{ return 0; }
#undef  main
#define main K_and_R_C_main
],      [ return 0; ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding SDL or finding the wrong"
          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          CXXFLAGS="$ac_save_CXXFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     SDL_CFLAGS=""
     SDL_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(SDL_CFLAGS)
  AC_SUBST(SDL_LIBS)
  rm -f conf.sdltest
])

# Copyright (C) 1999-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.


# AM_PATH_PYTHON([MINIMUM-VERSION], [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
# ---------------------------------------------------------------------------
# Adds support for distributing Python modules and packages.  To
# install modules, copy them to $(pythondir), using the python_PYTHON
# automake variable.  To install a package with the same name as the
# automake package, install to $(pkgpythondir), or use the
# pkgpython_PYTHON automake variable.
#
# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as
# locations to install python extension modules (shared libraries).
# Another macro is required to find the appropriate flags to compile
# extension modules.
#
# If your package is configured with a different prefix to python,
# users will have to add the install directory to the PYTHONPATH
# environment variable, or create a .pth file (see the python
# documentation for details).
#
# If the MINIMUM-VERSION argument is passed, AM_PATH_PYTHON will
# cause an error if the version of python installed on the system
# doesn't meet the requirement.  MINIMUM-VERSION should consist of
# numbers and dots only.
AC_DEFUN([AM_PATH_PYTHON],
 [
  dnl Find a Python interpreter.  Python versions prior to 2.0 are not
  dnl supported. (2.0 was released on October 16, 2000).
  m4_define_default([_AM_PYTHON_INTERPRETER_LIST],
[python python2 python3 python3.3 python3.2 python3.1 python3.0 python2.7 dnl
 python2.6 python2.5 python2.4 python2.3 python2.2 python2.1 python2.0])

  AC_ARG_VAR([PYTHON], [the Python interpreter])

  m4_if([$1],[],[
    dnl No version check is needed.
    # Find any Python interpreter.
    if test -z "$PYTHON"; then
      AC_PATH_PROGS([PYTHON], _AM_PYTHON_INTERPRETER_LIST, :)
    fi
    am_display_PYTHON=python
  ], [
    dnl A version check is needed.
    if test -n "$PYTHON"; then
      # If the user set $PYTHON, use it and don't search something else.
      AC_MSG_CHECKING([whether $PYTHON version is >= $1])
      AM_PYTHON_CHECK_VERSION([$PYTHON], [$1],
			      [AC_MSG_RESULT([yes])],
			      [AC_MSG_RESULT([no])
			       AC_MSG_ERROR([Python interpreter is too old])])
      am_display_PYTHON=$PYTHON
    else
      # Otherwise, try each interpreter until we find one that satisfies
      # VERSION.
      AC_CACHE_CHECK([for a Python interpreter with version >= $1],
	[am_cv_pathless_PYTHON],[
	for am_cv_pathless_PYTHON in _AM_PYTHON_INTERPRETER_LIST none; do
	  test "$am_cv_pathless_PYTHON" = none && break
	  AM_PYTHON_CHECK_VERSION([$am_cv_pathless_PYTHON], [$1], [break])
	done])
      # Set $PYTHON to the absolute path of $am_cv_pathless_PYTHON.
      if test "$am_cv_pathless_PYTHON" = none; then
	PYTHON=:
      else
        AC_PATH_PROG([PYTHON], [$am_cv_pathless_PYTHON])
      fi
      am_display_PYTHON=$am_cv_pathless_PYTHON
    fi
  ])

  if test "$PYTHON" = :; then
  dnl Run any user-specified action, or abort.
    m4_default([$3], [AC_MSG_ERROR([no suitable Python interpreter found])])
  else

  dnl Query Python for its version number.  Getting [:3] seems to be
  dnl the best way to do this; it's what "site.py" does in the standard
  dnl library.

  AC_CACHE_CHECK([for $am_display_PYTHON version], [am_cv_python_version],
    [am_cv_python_version=`$PYTHON -c "import sys; sys.stdout.write(sys.version[[:3]])"`])
  AC_SUBST([PYTHON_VERSION], [$am_cv_python_version])

  dnl Use the values of $prefix and $exec_prefix for the corresponding
  dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX.  These are made
  dnl distinct variables so they can be overridden if need be.  However,
  dnl general consensus is that you shouldn't need this ability.

  AC_SUBST([PYTHON_PREFIX], ['${prefix}'])
  AC_SUBST([PYTHON_EXEC_PREFIX], ['${exec_prefix}'])

  dnl At times (like when building shared libraries) you may want
  dnl to know which OS platform Python thinks this is.

  AC_CACHE_CHECK([for $am_display_PYTHON platform], [am_cv_python_platform],
    [am_cv_python_platform=`$PYTHON -c "import sys; sys.stdout.write(sys.platform)"`])
  AC_SUBST([PYTHON_PLATFORM], [$am_cv_python_platform])

  # Just factor out some code duplication.
  am_python_setup_sysconfig="\
import sys
# Prefer sysconfig over distutils.sysconfig, for better compatibility
# with python 3.x.  See automake bug#10227.
try:
    import sysconfig
except ImportError:
    can_use_sysconfig = 0
else:
    can_use_sysconfig = 1
# Can't use sysconfig in CPython 2.7, since it's broken in virtualenvs:
# <https://github.com/pypa/virtualenv/issues/118>
try:
    from platform import python_implementation
    if python_implementation() == 'CPython' and sys.version[[:3]] == '2.7':
        can_use_sysconfig = 0
except ImportError:
    pass"

  dnl Set up 4 directories:

  dnl pythondir -- where to install python scripts.  This is the
  dnl   site-packages directory, not the python standard library
  dnl   directory like in previous automake betas.  This behavior
  dnl   is more consistent with lispdir.m4 for example.
  dnl Query distutils for this directory.
  AC_CACHE_CHECK([for $am_display_PYTHON script directory],
    [am_cv_python_pythondir],
    [if test "x$prefix" = xNONE
     then
       am_py_prefix=$ac_default_prefix
     else
       am_py_prefix=$prefix
     fi
     am_cv_python_pythondir=`$PYTHON -c "
$am_python_setup_sysconfig
if can_use_sysconfig:
    sitedir = sysconfig.get_path('purelib', vars={'base':'$am_py_prefix'})
else:
    from distutils import sysconfig
    sitedir = sysconfig.get_python_lib(0, 0, prefix='$am_py_prefix')
sys.stdout.write(sitedir)"`
     case $am_cv_python_pythondir in
     $am_py_prefix*)
       am__strip_prefix=`echo "$am_py_prefix" | sed 's|.|.|g'`
       am_cv_python_pythondir=`echo "$am_cv_python_pythondir" | sed "s,^$am__strip_prefix,$PYTHON_PREFIX,"`
       ;;
     *)
       case $am_py_prefix in
         /usr|/System*) ;;
         *)
	  am_cv_python_pythondir=$PYTHON_PREFIX/lib/python$PYTHON_VERSION/site-packages
	  ;;
       esac
       ;;
     esac
    ])
  AC_SUBST([pythondir], [$am_cv_python_pythondir])

  dnl pkgpythondir -- $PACKAGE directory under pythondir.  Was
  dnl   PYTHON_SITE_PACKAGE in previous betas, but this naming is
  dnl   more consistent with the rest of automake.

  AC_SUBST([pkgpythondir], [\${pythondir}/$PACKAGE])

  dnl pyexecdir -- directory for installing python extension modules
  dnl   (shared libraries)
  dnl Query distutils for this directory.
  AC_CACHE_CHECK([for $am_display_PYTHON extension module directory],
    [am_cv_python_pyexecdir],
    [if test "x$exec_prefix" = xNONE
     then
       am_py_exec_prefix=$am_py_prefix
     else
       am_py_exec_prefix=$exec_prefix
     fi
     am_cv_python_pyexecdir=`$PYTHON -c "
$am_python_setup_sysconfig
if can_use_sysconfig:
    sitedir = sysconfig.get_path('platlib', vars={'platbase':'$am_py_prefix'})
else:
    from distutils import sysconfig
    sitedir = sysconfig.get_python_lib(1, 0, prefix='$am_py_prefix')
sys.stdout.write(sitedir)"`
     case $am_cv_python_pyexecdir in
     $am_py_exec_prefix*)
       am__strip_prefix=`echo "$am_py_exec_prefix" | sed 's|.|.|g'`
       am_cv_python_pyexecdir=`echo "$am_cv_python_pyexecdir" | sed "s,^$am__strip_prefix,$PYTHON_EXEC_PREFIX,"`
       ;;
     *)
       case $am_py_exec_prefix in
         /usr|/System*) ;;
         *)
	   am_cv_python_pyexecdir=$PYTHON_EXEC_PREFIX/lib/python$PYTHON_VERSION/site-packages
	   ;;
       esac
       ;;
     esac
    ])
  AC_SUBST([pyexecdir], [$am_cv_python_pyexecdir])

  dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE)

  AC_SUBST([pkgpyexecdir], [\${pyexecdir}/$PACKAGE])

  dnl Run any user-specified action.
  $2
  fi

])


# AM_PYTHON_CHECK_VERSION(PROG, VERSION, [ACTION-IF-TRUE], [ACTION-IF-FALSE])
# ---------------------------------------------------------------------------
# Run ACTION-IF-TRUE if the Python interpreter PROG has version >= VERSION.
# Run ACTION-IF-FALSE otherwise.
# This test uses sys.hexversion instead of the string equivalent (first
# word of sys.version), in order to cope with versions such as 2.2c1.
# This supports Python 2.0 or higher. (2.0 was released on October 16, 2000).
AC_DEFUN([AM_PYTHON_CHECK_VERSION],
 [prog="import sys
# split strings by '.' and convert to numeric.  Append some zeros
# because we need at least 4 digits for the hex conversion.
# map returns an iterator in Python 3.0 and a list in 2.x
minver = list(map(int, '$2'.split('.'))) + [[0, 0, 0]]
minverhex = 0
# xrange is not present in Python 3.0 and range returns an iterator
for i in list(range(0, 4)): minverhex = (minverhex << 8) + minver[[i]]
sys.exit(sys.hexversion < minverhex)"
  AS_IF([AM_RUN_LOG([$1 -c "$prog"])], [$3], [$4])])

# Copyright (C) 2001-2013 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# AM_RUN_LOG(COMMAND)
# -------------------
# Run COMMAND, save the exit status in ac_status, and log it.
# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
AC_DEFUN([AM_RUN_LOG],
[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
   (exit $ac_status); }])

m4_include([acinclude.m4])