basepath fix

Author: blakadder

Buttons-and-Switches.md

@@ -236,7 +236,7 @@ Command [`SetOption11`](commands#setoption11) allows for swapping the functional
 
 These changes result in the following:
 
-![Action matrix](/docs/_media/button-matrix.png ":size=300")
+![Action matrix](../_media/button-matrix.png ":size=300")
 
 #### Example
 

installation/Hardware-Preparation.md

@@ -9,7 +9,7 @@ In most cases those pins are available on the PCB in the form of pin holes or so
 >
 >DO NOT CONNECT DEVICES TO MAINS POWER WHILE THE COVER IS OPEN AND CIRCUIT BOARD IS EXPOSED!!!
 
-<img alt="Sonoff Pow Bricked" src="/docs/_media/pow1.jpg" style="margin:5px;float:right;width:240px">
+<img alt="Sonoff Pow Bricked" src="../_media/pow1.jpg" style="margin:5px;float:right;width:240px">
 
 **NEVER TRY TO FLASH WHILE YOUR DEVICE IS CONNECTED TO MAINS POWER!!!**
 

integrations/Alexa.md

@@ -18,7 +18,7 @@ You can interact with Tasmota using Amazon Alexa through its Echo devices .
 
 In **Configuration - Configure Other** page in the webUI select emulation type.
 
-![](/docs/_media/emulation_confguration.png)
+![](../_media/emulation_confguration.png)
 
 > [!WARNING]
 > Alexa Hue integration requires a physical Alexa device. The app alone is not enough.

integrations/Domoticz.md

@@ -1,5 +1,5 @@
 
-<img alt="Domoticz" src="/docs/_media/logo/domoticz2.jpg" style="margin:10px;float:right;width:20em"> </img>
+<img alt="Domoticz" src="../_media/logo/domoticz2.jpg" style="margin:10px;float:right;width:20em"> </img>
 Tasmota supports [Domoticz](http://www.domoticz.com/) MQTT 'out of the box' for both relays and sensors.
 
 Find below the procedure to configure Domoticz and Tasmota.
@@ -30,7 +30,7 @@ Make a new virtual switch and remeber its Idx number.
     1. Remember it's Idx number
 
 ## Tasmota Configuration
-<img alt="Domoticz" src="/docs/_media/logo/domoticz3.jpg" style="margin:10px;float:right;width:15em"> </img>
+<img alt="Domoticz" src="../_media/logo/domoticz3.jpg" style="margin:10px;float:right;width:15em"> </img>
 Tasmota provides different ways to configure Domoticz parameters. Choose the method you prefer:
 
 [The sections below don't look like they are needed any longer. The in topic and out topic entry areas don't appear to be in the Domoticz configure section - at least they are not there in mine and mine is working 17/03/2018]

peripherals/A4988-Stepper-Motor-Controller.md

@@ -66,9 +66,9 @@ Virtually everything which has to be moved or rotated can be done now using thes
 ![28BYJ-48_V1](https://user-images.githubusercontent.com/34340210/66860253-d91a8600-ef5a-11e9-9195-c816e329abb8.jpg ':size=200')  
 
 ### Breakout Boards
-![](/docs/_media/peripherals/stepper-motor1.webp ':size=100') 
-![](/docs/_media/peripherals/stepper-motor2.webp ':size=100') 
-![](/docs/_media/peripherals/stepper-motor3.webp ':size=100') 
+![](../_media/peripherals/stepper-motor1.webp ':size=100') 
+![](../_media/peripherals/stepper-motor2.webp ':size=100') 
+![](../_media/peripherals/stepper-motor3.webp ':size=100') 
 
 #### Buy Links
 [Banggood](https://www.banggood.com/A4988DRV8825-Stepper-Motor-Control-Board-Expansion-Board-For-3D-Printer-p-1238774.html)  

peripherals/ADC.md

@@ -27,7 +27,7 @@ The reading will show in web UI's sensor section as "_%option% %value%_" dependi
 When using Temperature (2) or light (3) a calibration could be needed. In case of shifted values [`AdcParam`](Commands#adcparam) can be used to calibrate the output.
 
 Example: ADC as `Analog (1)`    
-![ADC in web UI](/docs/_media/Analog0.png)
+![ADC in web UI](../_media/Analog0.png)
 
 A message will be published in `tele/%topic%/SENSOR` JSON response as `"ANALOG": ` depending on the selected option.