Kconfig

# Copyright (c) 2020 The ZMK Contributors
# SPDX-License-Identifier: MIT

mainmenu "ZMK Firmware"

menu "ZMK"

menu "Basic Keyboard Setup"

config ZMK_KEYBOARD_NAME
    string "Keyboard Name"

config USB_DEVICE_PRODUCT
    default ZMK_KEYBOARD_NAME

config BT_DEVICE_NAME
    default ZMK_KEYBOARD_NAME

config USB_DEVICE_VID
    default 0x1D50

config USB_DEVICE_PID
    default 0x615E

config USB_DEVICE_MANUFACTURER
    default "ZMK Project"

config BT_DIS_PNP_VID
    default 0x1D50

config BT_DIS_PNP_PID
    default 0x615E

config BT_DIS_MODEL
    default ZMK_KEYBOARD_NAME

config BT_DIS_MANUF
    default "ZMK Project"

menu "HID"

choice ZMK_HID_REPORT_TYPE
    prompt "HID Report Type"

config ZMK_HID_REPORT_TYPE_HKRO
    bool "#-Key Roll Over (HKRO) HID Report"
    help
      Enable # key roll over for HID report. This selection is "boot keyboard" compatible
      but limits the total number of possible keys to report as held to #.

config ZMK_HID_REPORT_TYPE_NKRO
    bool "Full N-Key Roll Over (NKRO) HID Report"
    help
      Enable full N-Key Roll Over for HID output. This selection will prevent the keyboard
      from working with some BIOS/UEFI versions that only support "boot keyboard" support.
      This option also prevents using some infrequently used higher range HID usages.

endchoice

if ZMK_HID_REPORT_TYPE_HKRO

config ZMK_HID_KEYBOARD_REPORT_SIZE
    int "# Keyboard Keys Reportable"
    default 6

endif

config ZMK_HID_CONSUMER_REPORT_SIZE
    int "# Consumer Keys Reportable"
    default 6


choice ZMK_HID_CONSUMER_REPORT_USAGES
    prompt "HID Report Type"

config ZMK_HID_CONSUMER_REPORT_USAGES_FULL
    bool "Full Consumer HID Usage Support"
    help
      Enable full Consumer usage ID values to be sent to hosts. Allows for less
      frequently used usages, but has compatibability issues with some host OSes.

config ZMK_HID_CONSUMER_REPORT_USAGES_BASIC
    bool "Basic Consumer HID Usage Support"
    help
      Enable Consumer usage ID values up to "Playback Speed - Slow" to be sent to
      hosts. Allows for broader compatibability with more host OSes.

endchoice

menu "Output Types"

config ZMK_USB
    bool "USB"
    select USB
    select USB_DEVICE_STACK
    select USB_DEVICE_HID

if ZMK_USB

config USB_NUMOF_EP_WRITE_RETRIES
    default 10

config USB_HID_POLL_INTERVAL_MS
    default 1

#ZMK_USB
endif

menuconfig ZMK_BLE
    bool "BLE (HID over GATT)"
    select BT
    select BT_SMP
    select BT_SMP_SC_PAIR_ONLY
    select BT_SMP_APP_PAIRING_ACCEPT
    select BT_PERIPHERAL
    select BT_DIS
    select BT_BAS
    select BT_SETTINGS
    select SETTINGS

if ZMK_BLE

choice BT_LL_SW_LLCP_IMPL
    default BT_LL_SW_LLCP_LEGACY

endchoice

config SYSTEM_WORKQUEUE_STACK_SIZE
    default 4096 if SOC_RP2040
    default 2048

config ZMK_BLE_THREAD_STACK_SIZE
    int "BLE notify thread stack size"
    default 512

config ZMK_BLE_THREAD_PRIORITY
    int "BLE notify thread priority"
    default 5

config ZMK_BLE_KEYBOARD_REPORT_QUEUE_SIZE
    int "Max number of keyboard HID reports to queue for sending over BLE"
    default 20

config ZMK_BLE_CONSUMER_REPORT_QUEUE_SIZE
    int "Max number of consumer HID reports to queue for sending over BLE"
    default 5

config ZMK_BLE_CLEAR_BONDS_ON_START
    bool "Configuration that clears all bond information from the keyboard on startup."
    default n

# HID GATT notifications sent this way are *not* picked up by Linux, and possibly others.
config BT_GATT_NOTIFY_MULTIPLE
    default n

config BT_GATT_AUTO_SEC_REQ
    default n

config BT_DEVICE_APPEARANCE
    default 961

config ZMK_BLE_PASSKEY_ENTRY
    bool "Experimental: Requiring typing passkey from host to pair BLE connection"
    default n

config BT_PERIPHERAL_PREF_MIN_INT
    default 6

config BT_PERIPHERAL_PREF_MAX_INT
    default 12

config BT_PERIPHERAL_PREF_LATENCY
    default 30

config BT_PERIPHERAL_PREF_TIMEOUT
    default 400

#ZMK_BLE
endif

#Output Types
endmenu

# HID
endmenu

rsource "src/split/Kconfig"

#Basic Keyboard Setup
endmenu

menu "Display/LED Options"

rsource "src/display/Kconfig"

menuconfig ZMK_RGB_UNDERGLOW
    bool "RGB Adressable LED Underglow"
    select LED_STRIP

if ZMK_RGB_UNDERGLOW

# This default value cuts down on tons of excess .conf files, if you're using GPIO, manually disable this
config SPI
    default y

config ZMK_RGB_UNDERGLOW_EXT_POWER
    bool "RGB underglow toggling also controls external power"
    default y

config ZMK_RGB_UNDERGLOW_BRT_MIN
    int "RGB underglow minimum brightness in percent"
    range 0 100
    default 0

config ZMK_RGB_UNDERGLOW_BRT_MAX
    int "RGB underglow maximum brightness in percent"
    range ZMK_RGB_UNDERGLOW_BRT_MIN 100
    default 100

config ZMK_RGB_UNDERGLOW_HUE_STEP
    int "RGB underglow hue step in degrees"
    range 0 359
    default 10

config ZMK_RGB_UNDERGLOW_SAT_STEP
    int "RGB underglow saturation step in percent"
    range 0 100
    default 10

config ZMK_RGB_UNDERGLOW_BRT_STEP
    int "RGB underglow brightness step in percent"
    range 0 100
    default 10

config ZMK_RGB_UNDERGLOW_HUE_START
    int "RGB underglow start hue value in degrees"
    range 0 359
    default 0

config ZMK_RGB_UNDERGLOW_SAT_START
    int "RGB underglow start saturations value in percent"
    range 0 100
    default 100

config ZMK_RGB_UNDERGLOW_BRT_START
    int "RGB underglow start brightness value in percent"
    range ZMK_RGB_UNDERGLOW_BRT_MIN ZMK_RGB_UNDERGLOW_BRT_MAX
    default ZMK_RGB_UNDERGLOW_BRT_MAX

config ZMK_RGB_UNDERGLOW_SPD_START
    int "RGB underglow start animation speed value"
    range 1 5
    default 3

config ZMK_RGB_UNDERGLOW_EFF_START
    int "RGB underglow start effect int value related to the effect enum list"
    range 0 3
    default 0

config ZMK_RGB_UNDERGLOW_ON_START
    bool "RGB underglow starts on by default"
    default y

config ZMK_RGB_UNDERGLOW_AUTO_OFF_IDLE
    bool "Turn off RGB underglow when keyboard goes into idle state"

config ZMK_RGB_UNDERGLOW_AUTO_OFF_USB
    bool "Turn off RGB underglow when USB is disconnected"
    depends on USB_DEVICE_STACK

#ZMK_RGB_UNDERGLOW
endif

menuconfig ZMK_BACKLIGHT
    bool "LED backlight"
    select LED

if ZMK_BACKLIGHT

config ZMK_BACKLIGHT_BRT_STEP
    int "Brightness step in percent"
    range 1 100
    default 20

config ZMK_BACKLIGHT_BRT_START
    int "Default brightness in percent"
    range 1 100
    default 40

config ZMK_BACKLIGHT_ON_START
    bool "Default backlight state"
    default y

config ZMK_BACKLIGHT_AUTO_OFF_IDLE
    bool "Turn off backlight when keyboard goes into idle state"

config ZMK_BACKLIGHT_AUTO_OFF_USB
    bool "Turn off backlight when USB is disconnected"

#ZMK_BACKLIGHT
endif

#Display/LED Options
endmenu

menu "Power Management"

config ZMK_IDLE_TIMEOUT
    int "Milliseconds of inactivity before entering idle state (OLED shutoff, etc)"
    default 30000

config ZMK_SLEEP
    bool "Enable deep sleep support"
    imply USB

if ZMK_SLEEP

config PM_DEVICE
    default y

config ZMK_IDLE_SLEEP_TIMEOUT
    int "Milliseconds of inactivity before entering deep sleep"
    default 900000

#ZMK_SLEEP
endif

config ZMK_EXT_POWER
    bool "Enable support to control external power output"
    default y

#Power Management
endmenu

menu "Combo options"

config ZMK_COMBO_MAX_PRESSED_COMBOS
    int "Maximum number of currently pressed combos"
    default 4

config ZMK_COMBO_MAX_COMBOS_PER_KEY
    int "Maximum number of combos per key"
    default 5

config ZMK_COMBO_MAX_KEYS_PER_COMBO
    int "Maximum number of keys per combo"
    default 4

#Combo options
endmenu

menu "Behavior Options"

config ZMK_BEHAVIORS_QUEUE_SIZE
    int "Maximum number of behaviors to allow queueing from a macro or other complex behavior"
    default 64

rsource "Kconfig.behaviors"

config ZMK_MACRO_DEFAULT_WAIT_MS
    int "Default time to wait (in milliseconds) before triggering the next behavior in macros"
    default 15

config ZMK_MACRO_DEFAULT_TAP_MS
    int "Default time to wait (in milliseconds) between the press and release events of a tapped behavior in macros"
    default 30

endmenu

menu "Advanced"

menu "Initialization Priorities"

if USB_DEVICE_STACK

config ZMK_USB_INIT_PRIORITY
    int "USB Init Priority"
    default 50

#USB
endif

if ZMK_BLE || ZMK_SPLIT_BLE

config ZMK_BLE_INIT_PRIORITY
    int "BLE Init Priority"
    default 50

#ZMK_BLE || ZMK_SPLIT_BLE
endif

#Initialization Priorities
endmenu

menu "KSCAN Settings"

config ZMK_KSCAN_EVENT_QUEUE_SIZE
    int "Size of the event queue for KSCAN events to buffer events"
    default 4

#KSCAN Settings
endmenu

menu "Logging"

config ZMK_LOGGING_MINIMAL
    bool "Suppress all ZMK debug log messages"
    default false

if !ZMK_LOGGING_MINIMAL

config ZMK_LOG_LEVEL
    default 4

endif

config ZMK_USB_LOGGING
    bool "Enable USB CDC ACM logging to help debug"
    select LOG
    select USB
    select USB_DEVICE_STACK
    select USB_CDC_ACM
    select SERIAL
    select CONSOLE
    select UART_INTERRUPT_DRIVEN
    select UART_LINE_CTRL
    select UART_CONSOLE
    select USB_UART_CONSOLE

if ZMK_USB_LOGGING

choice USB_CDC_ACM_LOG_LEVEL_CHOICE
    default USB_CDC_ACM_LOG_LEVEL_OFF
endchoice

choice USB_DRIVER_LOG_LEVEL_CHOICE
    default USB_DRIVER_LOG_LEVEL_OFF
endchoice

# We do this to avoid log loop where logging to USB generates more log messages.

config USB_CDC_ACM_RINGBUF_SIZE
    default 1024

config LOG_PROCESS_THREAD_STARTUP_DELAY_MS
    default 1000

#ZMK_USB_LOGGING
endif

config ZMK_RTT_LOGGING
    bool "Enable RTT logging to help debug"
    select LOG
    select DEBUG
    select ASSERT
    select USE_SEGGER_RTT
    select CONSOLE
    select RTT_CONSOLE

if ZMK_RTT_LOGGING

config SEGGER_RTT_BUFFER_SIZE_UP
    default 8192

#ZMK_RTT_LOGGING
endif

if ZMK_USB_LOGGING || ZMK_RTT_LOGGING

config LOG_BUFFER_SIZE
    default 8192

config LOG_PROCESS_THREAD_SLEEP_MS
    default 100

#ZMK_USB_LOGGING || ZMK_RTT_LOGGING
endif

#Logging
endmenu

if SETTINGS

config ZMK_SETTINGS_SAVE_DEBOUNCE
    int "Milliseconds to debounce settings saves"
    default 60000

#SETTINGS
endif

config ZMK_BATTERY_REPORT_INTERVAL
    depends on ZMK_BLE
    int "Battery level report interval in seconds"
    default 60

#Advanced
endmenu

#ZMK
endmenu

config HEAP_MEM_POOL_SIZE
    default 8192

config KERNEL_BIN_NAME
    default "zmk"

config REBOOT
    default y

config USB_DEVICE_STACK
    default y if HAS_HW_NRF_USBD

config ZMK_WPM
    bool "Calculate WPM"
    default n

config SENSOR
    default y

choice CBPRINTF_IMPLEMENTATION
    default CBPRINTF_NANO

endchoice

module = ZMK
module-str = zmk
source "subsys/logging/Kconfig.template.log_config"

rsource "boards/Kconfig"
rsource "boards/shields/*/Kconfig.defconfig"
rsource "boards/shields/*/Kconfig.shield"

osource "$(ZMK_CONFIG)/boards/shields/*/Kconfig.defconfig"
osource "$(ZMK_CONFIG)/boards/shields/*/Kconfig.shield"


source "Kconfig.zephyr"