gemm_sm70.cu

/***************************************************************************************************
 * Copyright (c) 2017-2021, NVIDIA CORPORATION.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification, are permitted
 * provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright notice, this list of
 *       conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright notice, this list of
 *       conditions and the following disclaimer in the documentation and/or other materials
 *       provided with the distribution.
 *     * Neither the name of the NVIDIA CORPORATION nor the names of its contributors may be used
 *       to endorse or promote products derived from this software without specific prior written
 *       permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL NVIDIA CORPORATION BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TOR (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 **************************************************************************************************/
/*! \file
    \brief Unit tests for thread-level GEMM
*/

#include "../../common/cutlass_unit_test.h"

#include "cutlass/aligned_buffer.h"
#include "cutlass/half.h"

#include "cutlass/gemm/warp/mma_tensor_op_sm70.h"

#include "cutlass/core_io.h"
#include "cutlass/util/host_tensor.h"
#include "cutlass/util/tensor_view_io.h"

#include "cutlass/util/reference/host/tensor_fill.h"
#include "cutlass/util/reference/host/tensor_compare.h"
#include "cutlass/util/reference/host/gemm.h"

#include "testbed.h"

#if defined(CUTLASS_ARCH_MMA_SM70_SUPPORTED)

/////////////////////////////////////////////////////////////////////////////////////////////////

TEST(SM70_warp_gemm_tensor_op_congruous, 128x128x16_64x64x16_16x16x4) {

  using Shape = cutlass::gemm::GemmShape<64, 64, 16>;
  using ElementA = cutlass::half_t;
  using ElementB = cutlass::half_t;
  using ElementC = cutlass::half_t;
  using LayoutA = cutlass::layout::ColumnMajorVoltaTensorOpMultiplicandCongruous<cutlass::sizeof_bits<ElementA>::value>;
  using LayoutB = cutlass::layout::RowMajorVoltaTensorOpMultiplicandBCongruous<cutlass::sizeof_bits<ElementB>::value>;

  using Policy = cutlass::gemm::warp::MmaTensorOpPolicy<
    cutlass::arch::Mma<
      cutlass::gemm::GemmShape<16, 16, 4>,
      32,
      ElementA,
      cutlass::layout::ColumnMajor,
      ElementB,
      cutlass::layout::RowMajor,
      ElementC,
      cutlass::layout::RowMajor,
      cutlass::arch::OpMultiplyAdd
    >,
    cutlass::MatrixShape<1, 1>
  >;

  using MmaTensorOp = cutlass::gemm::warp::MmaVoltaTensorOp<
    Shape,
    ElementA,
    LayoutA,
    ElementB,
    LayoutB,
    ElementC,
    cutlass::layout::RowMajor,
    Policy
  >;

  test::gemm::warp::Testbed<MmaTensorOp, cutlass::gemm::GemmShape<128, 128, 16> >().run();
}

TEST(SM70_warp_gemm_tensor_op_congruous, 128x64x4_64x64x4_16x16x4) {

  using Shape = cutlass::gemm::GemmShape<64, 64, 4>;
  using ElementA = cutlass::half_t;
  using ElementB = cutlass::half_t;
  using ElementC = cutlass::half_t;
  using LayoutA = cutlass::layout::ColumnMajorVoltaTensorOpMultiplicandCongruous<cutlass::sizeof_bits<ElementA>::value>;
  using LayoutB = cutlass::layout::RowMajorVoltaTensorOpMultiplicandBCongruous<cutlass::sizeof_bits<ElementB>::value>;

  using Policy = cutlass::gemm::warp::MmaTensorOpPolicy<
    cutlass::arch::Mma<
      cutlass::gemm::GemmShape<16, 16, 4>,
      32,
      ElementA,
      cutlass::layout::ColumnMajor,
      ElementB,
      cutlass::layout::RowMajor,
      ElementC,
      cutlass::layout::RowMajor,
      cutlass::arch::OpMultiplyAdd
    >,
    cutlass::MatrixShape<1, 1>
  >;

  using MmaTensorOp = cutlass::gemm::warp::MmaVoltaTensorOp<
    Shape,
    ElementA,
    LayoutA,
    ElementB,
    LayoutB,
    ElementC,
    cutlass::layout::RowMajor,
    Policy
  >;

  test::gemm::warp::Testbed<MmaTensorOp, cutlass::gemm::GemmShape<128, 64, 4> >().run();
}

TEST(SM70_warp_gemm_tensor_op_congruous, 128x128x4_32x32x4_16x16x4) {

  using Shape = cutlass::gemm::GemmShape<32, 32, 4>;
  using ElementA = cutlass::half_t;
  using ElementB = cutlass::half_t;
  using ElementC = cutlass::half_t;
  using LayoutA = cutlass::layout::ColumnMajorVoltaTensorOpMultiplicandCongruous<cutlass::sizeof_bits<ElementA>::value>;
  using LayoutB = cutlass::layout::RowMajorVoltaTensorOpMultiplicandBCongruous<cutlass::sizeof_bits<ElementB>::value>;

  using Policy = cutlass::gemm::warp::MmaTensorOpPolicy<
    cutlass::arch::Mma<
      cutlass::gemm::GemmShape<16, 16, 4>,
      32,
      ElementA,
      cutlass::layout::ColumnMajor,
      ElementB,
      cutlass::layout::RowMajor,
      ElementC,
      cutlass::layout::RowMajor,
      cutlass::arch::OpMultiplyAdd
    >,
    cutlass::MatrixShape<1, 1>
  >;

  using MmaTensorOp = cutlass::gemm::warp::MmaVoltaTensorOp<
    Shape,
    ElementA,
    LayoutA,
    ElementB,
    LayoutB,
    ElementC,
    cutlass::layout::RowMajor,
    Policy
  >;

  test::gemm::warp::Testbed<MmaTensorOp, cutlass::gemm::GemmShape<128, 128, 4> >().run();
}

TEST(SM70_warp_gemm_tensor_op_crosswise, 64x64x32_64x64x32_16x16x4) {
  using Shape = cutlass::gemm::GemmShape<64, 64, 32>;
  using ElementA = cutlass::half_t;
  using ElementB = cutlass::half_t;
  using ElementC = cutlass::half_t;
  using LayoutA = cutlass::layout::RowMajorVoltaTensorOpMultiplicandCrosswise<
      cutlass::sizeof_bits<ElementA>::value, 32>;
  using LayoutB = cutlass::layout::ColumnMajorVoltaTensorOpMultiplicandCrosswise<
      cutlass::sizeof_bits<ElementB>::value, 32>;

  using Policy = cutlass::gemm::warp::MmaTensorOpPolicy<
    cutlass::arch::Mma<
      cutlass::gemm::GemmShape<16, 16, 4>,
      32,
      ElementA,
      cutlass::layout::RowMajor,
      ElementB,
      cutlass::layout::ColumnMajor,
      ElementC,
      cutlass::layout::RowMajor,
      cutlass::arch::OpMultiplyAdd
    >,
    cutlass::MatrixShape<1, 1>
  >;

  using MmaTensorOp = cutlass::gemm::warp::MmaVoltaTensorOp<
    Shape,
    ElementA,
    LayoutA,
    ElementB,
    LayoutB,
    ElementC,
    cutlass::layout::RowMajor,
    Policy
  >;

  test::gemm::warp::Testbed<MmaTensorOp, cutlass::gemm::GemmShape<64, 64, 32> >().run();
}

////////////////////////////////////////////////////////////////////////////////

TEST(SM70_warp_gemm_volta_tensor_op_canonical_f32_row_col, 64x64x16_64x64x4_8x8x4) {
  
  using Shape = cutlass::gemm::GemmShape<64, 64, 4>;
  using InstructionShape = cutlass::gemm::GemmShape<8, 8, 4>;
  using ElementA = cutlass::half_t;
  using ElementB = cutlass::half_t;
  using ElementC = float;
  using LayoutA = cutlass::layout::RowMajor;
  using LayoutB = cutlass::layout::ColumnMajor;

  using Policy = cutlass::gemm::warp::MmaTensorOpPolicy<
    cutlass::arch::Mma<
      cutlass::gemm::GemmShape<16, 16, 4>,
      32,
      ElementA,
      cutlass::layout::RowMajor,
      ElementB,
      cutlass::layout::ColumnMajor,
      ElementC,
      cutlass::layout::RowMajor,
      cutlass::arch::OpMultiplyAdd
    >,
    cutlass::MatrixShape<1, 1>
  >;

  using MmaTensorOp = cutlass::gemm::warp::MmaVoltaTensorOp<
    Shape,
    ElementA,
    LayoutA,
    ElementB,
    LayoutB,
    ElementC,
    cutlass::layout::RowMajor,
    Policy
  >;

  test::gemm::warp::Testbed<MmaTensorOp,
                            cutlass::gemm::GemmShape<64, 64, 16> >()
      .run();
}

TEST(SM70_warp_gemm_volta_tensor_op_canonical_f32_col_row, 64x64x16_64x64x4_8x8x4) {
  
  using Shape = cutlass::gemm::GemmShape<64, 64, 4>;
  using InstructionShape = cutlass::gemm::GemmShape<8, 8, 4>;
  using ElementA = cutlass::half_t;
  using ElementB = cutlass::half_t;
  using ElementC = float;
  using LayoutA = cutlass::layout::ColumnMajor;
  using LayoutB = cutlass::layout::RowMajor;

  using Policy = cutlass::gemm::warp::MmaTensorOpPolicy<
    cutlass::arch::Mma<
      cutlass::gemm::GemmShape<16, 16, 4>,
      32,
      ElementA,
      LayoutA,
      ElementB,
      LayoutB,
      ElementC,
      cutlass::layout::RowMajor,
      cutlass::arch::OpMultiplyAdd
    >,
    cutlass::MatrixShape<1, 1>
  >;

  using MmaTensorOp = cutlass::gemm::warp::MmaVoltaTensorOp<
    Shape,
    ElementA,
    LayoutA,
    ElementB,
    LayoutB,
    ElementC,
    cutlass::layout::RowMajor,
    Policy
  >;

  test::gemm::warp::Testbed<MmaTensorOp,
                            cutlass::gemm::GemmShape<64, 64, 16> >()
      .run();
}

/////////////////////////////////////////////////////////////////////////////////////////////////

#endif // CUTLASS_ARCH_MMA_SM70_SUPPORTED