Supported chips:
BPA-RS600-120
- Datasheet: Publicly available at the BluTek website
http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
- Authors:
- Chris Packham <chris.packham@alliedtelesis.co.nz>
The BPA-RS600 is a compact 600W removable power supply module.
This driver does not probe for PMBus devices. You will have to instantiate devices explicitly.
| curr1_label | "iin" |
| curr1_input | Measured input current |
| curr1_max | Maximum input current |
| curr1_max_alarm | Input current high alarm |
| curr2_label | "iout1" |
| curr2_input | Measured output current |
| curr2_max | Maximum output current |
| curr2_max_alarm | Output current high alarm |
| fan1_input | Measured fan speed |
| fan1_alarm | Fan warning |
| fan1_fault | Fan fault |
| in1_label | "vin" |
| in1_input | Measured input voltage |
| in1_max | Maximum input voltage |
| in1_max_alarm | Input voltage high alarm |
| in1_min | Minimum input voltage |
| in1_min_alarm | Input voltage low alarm |
| in2_label | "vout1" |
| in2_input | Measured output voltage |
| in2_max | Maximum output voltage |
| in2_max_alarm | Output voltage high alarm |
| in2_min | Maximum output voltage |
| in2_min_alarm | Output voltage low alarm |
| power1_label | "pin" |
| power1_input | Measured input power |
| power1_alarm | Input power alarm |
| power1_max | Maximum input power |
| power2_label | "pout1" |
| power2_input | Measured output power |
| power2_max | Maximum output power |
| power2_max_alarm | Output power high alarm |
| temp1_input | Measured temperature around input connector |
| temp1_alarm | Temperature alarm |
| temp2_input | Measured temperature around output connector |
| temp2_alarm | Temperature alarm |