Supported devices:
- Aquacomputer D5 Next watercooling pump
- Aquacomputer Farbwerk 360 RGB controller
Author: Aleksa Savic
This driver exposes hardware sensors of listed Aquacomputer devices, which communicate through proprietary USB HID protocols.
For the D5 Next pump, available sensors are pump and fan speed, power, voltage and current, as well as coolant temperature. Also available through debugfs are the serial number, firmware version and power-on count. Attaching a fan to it is optional and allows it to be controlled using temperature curves directly from the pump. If it's not connected, the fan-related sensors will report zeroes.
The pump can be configured either through software or via its physical interface. Configuring the pump through this driver is not implemented, as it seems to require sending it a complete configuration. That includes addressable RGB LEDs, for which there is no standard sysfs interface. Thus, that task is better suited for userspace tools.
The Farbwerk 360 exposes four temperature sensors. Depending on the device, not all sysfs and debugfs entries will be available.
The devices communicate via HID reports. The driver is loaded automatically by the kernel and supports hotswapping.
| temp[1-4]_input | Temperature sensors (in millidegrees Celsius) |
| fan[1-2]_input | Pump/fan speed (in RPM) |
| power[1-2]_input | Pump/fan power (in micro Watts) |
| in[0-2]_input | Pump/fan voltage (in milli Volts) |
| curr[1-2]_input | Pump/fan current (in milli Amperes) |
| serial_number | Serial number of the device |
| firmware_version | Version of installed firmware |
| power_cycles | Count of how many times the device was powered on |