OpenROAD is a chip physical design tool. It uses the OpenDB database as a design database and representation. OpenSTA is used for static timing analysis.
The OpenROAD build requires the following packages:
Tools
- cmake 3.14
- gcc 8.3.0 or clang
- bison 3.0.5
- flex 2.6.4
- swig 4.0
Libraries
- eigen https://gitlab.com/libeigen/eigen.git
- boost 1.68
- tcl 8.6
- zlib
git clone --recursive https://github.com/The-OpenROAD-Project/OpenROAD.git
cd OpenROAD
mkdir build
cd build
cmake ..
make
OpenROAD git submodules (cloned by the --recursive flag) are located in /src.
The default build type is RELEASE to compile optimized code.
The resulting executable is in build/src/openroad.
Optional CMake variables passed as -D= arguments to CMake are show below.
CMAKE_BUILD_TYPE DEBUG|RELEASE
CMAKE_CXX_FLAGS - additional compiler flags
TCL_LIB - path to tcl library
TCL_HEADER - path to tcl.h
ZLIB_ROOT - path to zlib
CMAKE_INSTALL_PREFIX
The default install directory is /usr/local.
To install in a different directory with CMake use:
cmake .. -DCMAKE_INSTALL_PREFIX=<prefix_path>
Alternatively, you can use the DESTDIR variable with make.
make DESTDIR=<prefix_path> install
There are a set of regression tests in /test.
test/regression
src/resizer/test/regression
openroad
-help show help and exit
-version show version and exit
-no_init do not read .openroad init file
-no_splash do not show the license splash at startup
-exit exit after reading cmd_file
cmd_file source cmd_file
OpenROAD sources the TCL command file ~/.openroad unless the command
line option -no_init is specified.
OpenROAD then sources the command file cmd_file. Unless the -exit
command line flag is specified it enters and interactive TCL command
interpreter.
OpenROAD is run using TCL scripts. The following commands are used to read and write design data.
read_lef [-tech] [-library] filename
read_def filename
write_def [-version 5.8|5.6|5.5|5.4|5.3] filename
read_verilog filename
write_verilog filename
read_db filename
write_db filename
Use the Tcl source command to read commands from a file.
source [-echo] file
If an error is encountered in a command while reading the command file,
the error is printed and no more commands are read from the file. If
file_continue_on_error is 1 OpenROAD will continue reading commands
after the error.
If exit_on_error is 1 OpenROAD will exit when it encounters an
error.
OpenROAD can be used to make a OpenDB database from LEF/DEF, or
Verilog (flat or hierarchical). Once the database is made it can be
saved as a file with the write_db command. OpenROAD can then read
the database with the read_db command without reading LEF/DEF or
Verilog.
The read_lef and read_def commands can be used to build an OpenDB
database as shown below. The read_lef -tech flag reads the
technology portion of a LEF file. The read_lef -library flag reads
the MACROs in the LEF file. If neither of the -tech and -library
flags are specified they default to -tech -library if no technology
has been read and -library if a technology exists in the database.
read_lef liberty1.lef
read_def reg1.def
# Write the db for future runs.
write_db reg1.db
The read_verilog command is used to build an OpenDB database as
shown below. Multiple verilog files for a hierarchical design can be
read. The link_design command is used to flatten the design
and make a database.
read_lef liberty1.lef
read_verilog reg1.v
link_design top
# Write the db for future runs.
write_db reg1.db
initialize_floorplan
[-site site_name] LEF site name for ROWS
[-tracks tracks_file] routing track specification
-die_area "lx ly ux uy" die area in microns
[-core_area "lx ly ux uy"] core area in microns
or
-utilization util utilization (0-100 percent)
[-aspect_ratio ratio] height / width, default 1.0
[-core_space space] space around core, default 0.0 (microns)
The die area and core size used to write ROWs can be specified explicitly with the -die_area and -core_area arguments. Alternatively, the die and core area can be computed from the design size and utilization as show below:
If no -tracks file is used the routing layers from the LEF are used.
core_area = design_area / (utilization / 100)
core_width = sqrt(core_area / aspect_ratio)
core_height = core_width * aspect_ratio
core = ( core_space, core_space ) ( core_space + core_width, core_space + core_height )
die = ( 0, 0 ) ( core_width + core_space * 2, core_height + core_space * 2 )
Place pins around core boundary.
auto_place_pins pin_layer
Gate resizer commands are described below.
The resizer commands stop when the design area is -max_utilization util percent of the core area. util is between 0 and 100.
set_wire_rc [-layer layer_name]
[-resistance res ]
[-capacitance cap]
[-corner corner_name]
The set_wire_rc command sets the resistance and capacitance used to
estimate delay of routing wires. Use -layer or -resistance and
-capacitance. If -layer is used, the LEF technology resistance
and area/edge capacitance values for the layer are used. The units
for -resistance and -capacitance are from the first liberty file
read, resistance_unit/distance_unit and liberty
capacitance_unit/distance_unit. RC parasitics are added based on
placed component pin locations. If there are no component locations no
parasitics are added. The resistance and capacitance are per distance
unit of a routing wire. Use the set_units command to check units or
set_cmd_units to change units. They should represent "average"
routing layer resistance and capacitance. If the set_wire_rc command
is not called before resizing, the default_wireload model specified in
the first liberty file or with the SDC set_wire_load command is used
to make parasitics.
buffer_ports [-inputs]
[-outputs]
-buffer_cell buffer_cell
The buffer_ports -inputs command adds a buffer between the input and
its loads. The buffer_ports -outputs adds a buffer between the port
driver and the output port. If The default behavior is
-inputs and -outputs if neither is specified.
resize [-libraries resize_libraries]
[-dont_use cells]
[-max_utilization util]
The resize command resizes gates to normalize slews.
The -libraries option specifies which libraries to use when
resizing. resize_libraries defaults to all of the liberty libraries
that have been read. Some designs have multiple libraries with
different transistor thresholds (Vt) and are used to trade off power
and speed. Chosing a low Vt library uses more power but results in a
faster design after the resizing step. Use the -dont_use option to
specify a list of patterns of cells to not use. For example, */DLY*
says do not use cells with names that begin with DLY in all
libraries.
repair_max_cap -buffer_cell buffer_cell
[-max_utilization util]
repair_max_slew -buffer_cell buffer_cell
[-max_utilization util]
The repair_max_cap and repair_max_slew commands repair nets with
maximum capacitance or slew violations by inserting buffers in the
net.
repair_max_fanout -max_fanout fanout
-buffer_cell buffer_cell
[-max_utilization util]
The repair_max_fanout command repairs nets with a fanout greater
than fanout by inserting buffers between the driver and the loads.
Buffers are located at the center of each group of loads.
repair_tie_fanout [-max_fanout fanout]
[-verbose]
lib_port
The repair_tie_fanout command repairs tie high/low nets with fanout
greater than fanout by cloning the tie high/low driver.
lib_port is the tie high/low port, which can be a library/cell/port
name or object returned by get_lib_pins. Clones are located at the
center of each group of loads.
repair_hold_violations -buffer_cell buffer_cell
[-max_utilization util]
The repair_hold_violations command inserts buffers to repair hold
check violations.
report_design_area
The report_design_area command reports the area of the design's
components and the utilization.
report_floating_nets [-verbose]
The report_floating_nets command reports nets with only one pin connection.
Use the -verbose flag to see the net names.
A typical resizer command file is shown below.
read_lef nlc18.lef
read_liberty nlc18.lib
read_def mea.def
read_sdc mea.sdc
set_wire_rc -layer metal2
set buffer_cell [get_lib_cell nlc18_worst/snl_bufx4]
set max_util 90
buffer_ports -buffer_cell $buffer_cell
resize -resize
repair_max_cap -buffer_cell $buffer_cell -max_utilization $max_util
repair_max_slew -buffer_cell $buffer_cell -max_utilization $max_util
# repair tie hi/low before max fanout so they don't get buffered
repair_tie_fanout -max_fanout 100 Nangate/LOGIC1_X1/Z
repair_max_fanout -max_fanout 100 -buffer_cell $buffer_cell -max_utilization $max_util
repair_hold_violations -buffer_cell $buffer_cell -max_utilization $max_util
Note that OpenSTA commands can be used to report timing metrics before or after resizing the design.
set_wire_rc -layer metal2
report_checks
report_tns
report_wns
report_checks
resize
report_checks
report_tns
report_wns
Timing analysis commands are documented in src/OpenSTA/doc/OpenSTA.pdf.
After the database has been read from LEF/DEF, Verilog or an OpenDB
database, use the read_liberty command to read Liberty library files
used by the design.
The example script below timing analyzes a database.
read_liberty liberty1.lib
read_db reg1.db
create_clock -name clk -period 10 {clk1 clk2 clk3}
set_input_delay -clock clk 0 {in1 in2}
set_output_delay -clock clk 0 out
report_checks
Tapcell and endcap insertion.
tapcell -tapcell_master <tapcell_master>
-endcap_master <endcap_master>
-endcap_cpp <endcap_cpp>
-distance <dist>
-halo_width_x <halo_x>
-halo_width_y <halo_y>
-tap_nwin2_master <tap_nwin2_master>
-tap_nwin3_master <tap_nwin3_master>
-tap_nwout2_master <tap_nwout2_master>
-tap_nwout3_master <tap_nwout3_master>
-tap_nwintie_master <tap_nwintie_master>
-tap_nwouttie_master <tap_nwouttie_master>
-cnrcap_nwin_master <cnrcap_nwin_master>
-cnrcap_nwout_master <cnrcap_nwout_master>
-incnrcap_nwin_master <incnrcap_nwin_master>
-incnrcap_nwout_master <incnrcap_nwout_master>
-tbtie_cpp <tbtie_cpp>
-no_cell_at_top_bottom
-add_boundary_cell
You can find script examples for both 45nm/65nm and 14nm in tapcell/etc/scripts
RePlAce global placement.
global_placement [-timing_driven]
[-bin_grid_count grid_count]
- timing_driven: Enable timing-driven mode
- grid_count: [64,128,256,512,..., int]. Default: Defined by internal algorithm.
Use the set_wire_rc command to set resistance and capacitance of
estimated wires used for timing.
The detailed_placement command does detailed placement of instances
to legal locations after global placement.
set_placement_padding -global [-left pad_left] [-right pad_right]
detailed_placement [-max_displacement rows]
check_placement [-verbose]
filler_placement filler_masters
set_power_net [-power power_name] [-ground ground_net]
The set_placement_padding command sets left and right padding in multiples of
the row site width. Use the set_padding command before legalizing
placement to leave room for routing.
The set_power_net command is used to set the power and ground
special net names. The defaults are VDD and VSS.
The check_placement command checks the placement legality. It returns 1 if the
placement is legal.
The filler_placement command fills gaps between detail placed instances
to connect the power and ground rails in the rows. filler_masters is
a list of master/macro names to use for filling the gaps. Wildcard matching
is supported, so FILL* will match FILLCELL_X1 FILLCELL_X16 FILLCELL_X2 FILLCELL_X32 FILLCELL_X4 FILLCELL_X8.
Create clock tree subnets. There are currently two ways one can run this command. The first is if the user does not have a characterization file. Thus, the wire segments are created manually based on the user parameters.
clock_tree_synthesis -buf_list <list_of_buffers> \
-sqr_cap <cap_per_sqr> \
-sqr_res <res_per_sqr> \
[-root_buf <root_buf>] \
[-max_slew <max_slew>] \
[-max_cap <max_cap>] \
[-slew_inter <slew_inter>] \
[-cap_inter <cap_inter>] \
[-wire_unit <wire_unit>] \
[-clk_nets <list_of_clk_nets>] \
[-out_path <lut_path>] \
[-only_characterization <enable>]
buf_list(mandatory) are the master cells (buffers) that will be considered when making the wire segments.sqr_cap(mandatory) is the capacitance (in picofarad) per micrometer (thus, the same unit that is used in the LEF syntax) to be used in the wire segments.sqr_res(mandatory) is the resistance (in ohm) per micrometer (thus, the same unit that is used in the LEF syntax) to be used in the wire segments.root_buffer(optional) is the master cell of the buffer that serves as root for the clock tree. If this parameter is omitted, the first master cell frombuf_listis taken.max_slew(optional) is the max slew value (in seconds) that the characterization will test. If this parameter is omitted, the code tries to obtain the value from the liberty file.max_cap(optional) is the max capacitance value (in farad) that the characterization will test. If this parameter is omitted, the code tries to obtain the value from the liberty file.slew_inter(optional) is the time value (in seconds) that the characterization will consider for results. If this parameter is omitted, the code gets the default value (5.0e-12). Be careful that this value can be quite low for bigger technologies (>65nm).cap_inter(optional) is the capacitance value (in farad) that the characterization will consider for results. If this parameter is omitted, the code gets the default value (5.0e-15). Be careful that this value can be quite low for bigger technologies (>65nm).wire_unit(optional) is the minimum unit distance between buffers for a specific wire. If this parameter is omitted, the code gets the value from ten times the height ofroot_buffer.clk_nets(optional) is a string containing the names of the clock roots. If this parameter is omitted, TritonCTS looks for the clock roots automatically.out_path(optional) is the output path (full) that the lut.txt and sol_list.txt files will be saved. This is used to load an existing characterization, without creating one from scratch.only_characterization(optional), if true, makes so that the code exits after running the characterization.
Instead of creating a characterization, you can use use the following parameters to load a characterization file.
clock_tree_synthesis -lut_file <lut_file> \
-sol_list <sol_list_file> \
-root_buf <root_buf> \
[-wire_unit <wire_unit>] \
[-clk_nets <list_of_clk_nets>]
lut_file(mandatory) is the file containing delay, power and other metrics for each segment.sol_list(mandatory) is the file containing the information on the topology of each segment (wirelengths and buffer masters).sqr_res(mandatory) is the resistance (in ohm) per database units to be used in the wire segments.root_buffer(mandatory) is the master cell of the buffer that serves as root for the clock tree. If this parameter is omitted, you can use thebuf_listargument, using the first master cell. If both arguments are omitted, an error is raised.wire_unit(optional) is the minimum unit distance between buffers for a specific wire, based on yourlut_file. If this parameter is omitted, the code gets the value from the header of thelut_file. For the old technology characterization, described here, this argument is mandatory, and omitting it raises an error.clk_nets(optional) is a string containing the names of the clock roots. If this parameter is omitted, TritonCTS looks for the clock roots automatically.
FastRoute global route. Generate routing guides given a placed design.
fastroute -output_file out_file
-capacity_adjustment <cap_adjust>
-min_routing_layer <min_layer>
-max_routing_layer <max_layer>
-pitches_in_tile <pitches>
-layers_adjustments <list_of_layers_to_adjust>
-regions_adjustments <list_of_regions_to_adjust>
-nets_alphas_priorities <list_of_alphas_per_net>
-verbose <verbose>
-unidirectional_routing
-clock_net_routing
Options description:
- capacity_adjustment: Set global capacity adjustment (e.g.: -capacity_adjustment 0.3)
- min_routing_layer: Set minimum routing layer (e.g.: -min_routing_layer 2)
- max_routing_layer: Set maximum routing layer (e.g.: max_routing_layer 9)
- pitches_in_tile: Set the number of pitches inside a GCell
- layers_adjustments: Set capacity adjustment to specific layers (e.g.: -layers_adjustments {{ } ...})
- regions_adjustments: Set capacity adjustment to specific regions (e.g.: -regions_adjustments {{ } ...})
- nets_alphas_priorities: Set alphas for specific nets when using clock net routing (e.g.: -nets_alphas_priorities {{<net_name> } ...})
- verbose: Set verbose of report. 0 for less verbose, 1 for medium verbose, 2 for full verbose (e.g.: -verbose 1)
- unidirectional_routing: Activate unidirectional routing (flag)
- clock_net_routing: Activate clock net routing (flag)
NOTE 1: if you use the flag unidirectional_routing, the minimum routing layer will be assigned as "2" automatically
OpenPhySyn Perform additional timing and area optimization.
set_psn_wire_rc [-layer layer_name]
[-resistance res_per_micron ]
[-capacitance cap_per_micron]
The set_psn_wire_rc command sets the average wire resistance/capacitance per micron; you can use -layer <layer_name> only to extract the value from the LEF technology. It should be invoked before physical optimization commands.
optimize_logic
[-tiehi tiehi_cell_name]
[-tielo tielo_cell_name]
The optimize_logic command should be run after the logic synthesis on hierarical designs to perform logic optimization; currently, it performs constant propagation to reduce the design area. You can optionally specify the name of tie-hi/tie-lo liberty cell names to use for the optimization.
optimize_design
[-no_gate_clone]
[-no_pin_swap]
[-clone_max_cap_factor factor]
[-clone_non_largest_cells]
The optimize_design command can be used for additional timing optimization, it should be run after the global placmenet. Currently it peforms gate cloning and comuttaitve pin swapping to enhance the timing.
optimize_fanout
-buffer_cell buffer_cell_name
-max_fanout max_fanout
The optimize_fanout command can be run after the logical synthesis to perform basic buffering based on the number of fanout pins.
PDNSim IR analysis. Report worst IR drop given a placed and PDN synthesized design
check_power_grid -vsrc <voltage_source_location_file>
analyze_power_grid -vsrc <voltage_source_location_file>
Options description:
- vsrc: Set the location of the power C4 bumps/IO pins