MacVim occasionally stops rendering text after sleep

[mattooca]

I've been experiencing issue #1068 (where syntax highlighting turns off in existing MacVim windows when computer wakes from sleep). I also recently noticed a new issue where all text occasionally disappears in all open MacVim windows. I think the trigger is either waking the laptop from sleep or attaching / detaching external displays.

The problem occurs every two days or so, and impacts both windows that were already open and any new windows opened after. I can resolve the problem by quitting and restarting MacVim, but I often have many open windows so prefer to find a fix.

I'm currently using MacVim 8.2.2164 (169), running on OS X 10.15.7. I think this issue first appeared after the previous MacVim update (I tried updating when I first noticed the problem to see if it would resolve the issue, but no luck).

Attached image shows a new MacVim window opened up after the issue starts. The only visible text is up on the title bar, the VIM splash screen doesn't show up.

[ychin]

Can you try running with a clean vimrc (by doing mvim --clean), and show me the settings you have by doing defaults read org.vim.MacVim | grep MM?

Also, if you say resize the window, would it have fixed the problem?

[mattooca]

Settings:

    MMAutosaveColumns = 230;
    MMAutosaveRows = 56;
    MMCurrentPreferencePane = General;
    MMTopLeftPoint = "{927, 1057}";

I'll try starting with mvim --clean next time the problem occurs.
Resizing windows did not make a difference, but I tried disconnecting and reconnecting the external display and found that the problem eventually went away (not right after reconnecting but a minute or so later).

[mattooca]

Problem recurred just now, I tried opening a new window with 'mvim --clean' but see the same problem in that new window. The geometry is different (230x56 instead of my default 120x56) and the color scheme is a bit different, but it has the same problem as a window opened with just 'mvim'.

This time I waited for a while rather than restarting MacVim or detaching/reattaching the external display. The problem went away on its own after about 5 minutes, although at first it only rendered the top line of each file. Additional lines appeared as I moved the cursor up or down to each line...

[schveiguy]

Having the same problem. This is quite annoying, as I frequently have 4 or 5 windows open, with 2-5 buffers each. And trying to save things is hard because I can't see anything I'm typing. I've seen it go away once, but most of the time I end up restarting it.

Another tidbit, this doesn't happen to me only when waking from sleep (I think). When this happens while I'm editing, it does not remove the existing rendered text until I move my cursor around in the file, and then every line the cursor touches is blanked. If I hit ctrl-L, it blanks the whole window's text.

Attached is a pic of one vim window I hit ctrl-L on with multiple buffers, and another one behind it where I just started to move around (you can see the area around the cursor is blank).

[ychin]

Huh that's annoying… @schveiguy can you also post your result of defaults read org.vim.MacVim | grep MM? Also, what kind of Mac are you using? And also, what font are you using?

Also, for both @schveiguy and @mattooca , do your monitors support retina display? Or do you switch between retina and non-retina? I'm mostly just grasping at straws here since I can't seem to repro the issue.

[timothy-knox]

I'm seeing the same problem. I'm running MacVim 8.2.2164 (169) on macOS 10.15.7.

$ defaults read org.vim.MacVim | grep MM
    MMAppearanceModeSelection = 1;
    MMAutosaveColumns = 127;
    MMAutosaveRows = 43;
    MMCurrentPreferencePane = Appearance;
    MMNoTitleBarWindow = 0;
    MMTitlebarAppearsTransparent = 1;
    MMTopLeftPoint = "{0, 1027}";

It occurs without sleeping. It persists for several minutes, and running ':redraw!' does not fix it. But after five-ish minutes, the line under the cursor suddenly becomes visible again, and ':redraw!' then brings the whole screen back.

[schveiguy]

I'm mostly just grasping at straws here since I can't seem to repro the issue.

It might be a good grasp. Nearly all my time I spend on my 4k attached monitor instead of my retina screen. If I had to guess, I'd say it happens mostly on my 4k screen, and it might be 100% of the time, I'm not sure.

I just spent about 5 days where I didn't have my screen, just the retina display of my macbook, and I didn't have the problem happen, but that's not really a meaningful detail, as it doesn't happen with any specific regularity.

My font is Menlo 14 point.

Here is the result of that defaults command:

    MMAutosaveColumns = 170;
    MMAutosaveRows = 83;
    MMCurrentPreferencePane = General;
    MMLastWindowClosedBehavior = 2;
    MMTopLeftPoint = "{1817, 1522}";
    MMZoomBoth = 1;

[schveiguy]

I did just notice that Macvim supports dark mode, I was on the "evening" setting for colors, because it wasn't available when I started using dark mode. I just switched back to the default scheme, and maybe this will make a difference?

Edit: eh, I went back. The blue that is used for the tildes at the bottom for the default scheme is hard on the eyes.

[ychin]

The default MacVim color scheme never got updated for dark mode and doesn't work well under it. I need to fix it… Anyway that's a different issue.

[mattooca]

Regarding monitors, this is happening on a Macbook Pro with Retina display, but I usually have it attached to one or two lower-resolution external displays. The problem is happening right now, I tried dragging MacVim windows to different monitors but it makes no difference.
One other funny detail: it looks like the open / close parentheses syntax highlighting still works, see the little blue box in attached screenshot.

[ychin]

I'm still struggling to repro this (even with an external 4K monitor), but if you see this again, try to change the font / font size. You could just do that by doing <cmd>- or <cmd>+ to quickly toggle font sizes. I think it would reset the font cache which would bring the text rendering back which should allow you to keep working.

Also, if changing font/font size does indeed solve the issue, let me know as that would confirm what I think is going wrong.

[ychin]

@mattooca can you clarify what you meant by this?

Attached image shows a new MacVim window opened up after the issue starts. The only visible text is up on the title bar, the VIM splash screen doesn't show up.

Are you saying that you saw that all of MacVim lost text rendering, then you opened a new window (either by Cmd-N or using the menu)? Or are you saying you already had a new window opened with text working, and then it lost its text rendering?

[mattooca]

I opened up a new window with command-N after noticing the problem, and that new window had the same problem. By the way, next time the problem occurs I'll try your suggestion of changing the font size. The issue didn't occur today.

…

On Thu, Feb 11, 2021, 8:14 PM Yee Cheng Chin ***@***.***> wrote: @mattooca <https://github.com/mattooca> can you clarify what you meant by this? Attached image shows a new MacVim window opened up after the issue starts. The only visible text is up on the title bar, the VIM splash screen doesn't show up. Are you saying that you saw that all of MacVim lost text rendering, *then* you opened a new window (either by Cmd-N or using the menu)? Or are you saying you already had a new window opened with text working, and then it lost its text rendering? — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#1164 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABLBAL5XVTSTSTXXDVQUXEDS6STKJANCNFSM4V6KFQAA> .

[mattooca]

The problem recurred this morning, and I tried a few things.
Changing font, changing font size, going into full screen mode, changing the color scheme, and opening up new windows: none of those fixed the issue.

However, disconnecting the external display did fix the problem. Text showed up again on all open windows almost immediately. The text stayed visible when I then reconnected to the external display, at least so far (I tried disconnecting about 10 minutes ago).