diff --git a/README.md b/README.md
index 46a3ff9..3d37982 100644
--- a/README.md
+++ b/README.md
@@ -1,13 +1,25 @@
 # Reverse engineering Sony PlayMemories Camera Apps #
 The latest Sony cameras include an Android subsystem used to run apps from the proprietary Sony PlayMemories Camera App Store (PMCA). We reverse engineered the installation process. This allows you to install custom Android apps on your camera.
 
-## How to use it? ###
-There are two ways to install apps on your camera. Be sure it is connected over USB and set to MTP or mass storage mode.
+## How to use ##
+The list of available apps can be found at [sony-pmca.appspot.com](https://sony-pmca.appspot.com/). If you are using Internet Explorer or Safari, apps can be installed directly from your browser. Other browsers and recent camera firmware updates are not compatible with this method anymore. It is recommended to use the native installers (pmca-gui and pmca-console) instead.
+
+**pmca-gui is the recommended way to install apps.** Binaries for Windows and OS X are available in the [release section](https://github.com/ma1co/Sony-PMCA-RE/releases/latest). Download and open the program, connect your camera via USB, go to the *Install* tab, select an app from the list and click *Install*.
+
+The list of compatible cameras can be found [here](https://github.com/ma1co/OpenMemories-Framework/blob/master/docs/Cameras.md).
+
+Further information can be found in the sections below.
 
 ### Browser plugin ###
-**Go to [sony-pmca.appspot.com](https://sony-pmca.appspot.com/) to try it out!** You can upload your own apps and install them to your camera using the official Sony browser plugin. Since other browser vendors are disabling NPAPI plugins, please try it using **Internet Explorer**.
+The browser-based installer can be found at [sony-pmca.appspot.com](https://sony-pmca.appspot.com/). This site uses the official Sony browser plugin to communicate with the camera directly from a browser window. Since other browser vendors are disabling NPAPI plugins, this method only works in Internet Explorer and Safari. Additionally, camera firmware updates released in June 2017 and later explicitly whitelist the URL of the official app store. Updated cameras refuse to install apps from our site. It is thus recommended to use the native installer instead.
+
+Meanwhile, the site is still used to keep track of the installation counters for the apps in the app list.
+
+### Native installer ###
+The native installer directly communicates with cameras over USB (MTP and mass storage connections are supported; for OS X see the notes below). All camera firmware versions are supported.
+
+This installer can also be used by developers to install .apk files from their computer.
 
-### Local installer ###
 Download the [latest release](https://github.com/ma1co/Sony-PMCA-RE/releases/latest) (Windows or OS X) or clone this repository.
 
 #### Graphical user interface ####
diff --git a/config.py b/config.py
index 49977d9..1fa0848 100644
--- a/config.py
+++ b/config.py
@@ -1,6 +1,9 @@
 githubClientId = ''
 githubClientSecret = ''
 
+githubProjectUser = 'ma1co'
+githubProjectRepo = 'Sony-PMCA-RE'
+
 githubAppListUser = 'ma1co'
 githubAppListRepo = 'OpenMemories-AppList'
 
diff --git a/main.py b/main.py
index 2339499..5d857ad 100644
--- a/main.py
+++ b/main.py
@@ -153,8 +153,11 @@ def jsonRepr(o):
    raise TypeError
   self.output('application/json', json.dumps(data, default=jsonRepr))
 
- def template(self, name, data = {}):
+ def template(self, name, data = None):
   """Renders a jinja2 template"""
+  if not data:
+   data = {}
+  data['projectRepo'] = (config.githubProjectUser, config.githubProjectRepo)
   self.response.write(jinjaEnv.get_template(name).render(data))
 
  def output(self, mimeType, data, filename = None):
diff --git a/templates/home.html b/templates/home.html
index 6ff6d7f..3c3f83a 100644
--- a/templates/home.html
+++ b/templates/home.html
@@ -7,7 +7,10 @@ <h1>Home</h1>
   <li><a href="{{ uri_for('apps') }}">Apps</a>: Install an app on your camera</li>
  </ul>
 
+ <h1>Important Information</h1>
+ <p>This browser-based installer is deprecated and not compatible with the newest camera firmware updates. It is recommended to use <a href="/{{ projectRepo[0] }}/{{ projectRepo[1] }}/releases/latest">pmca-gui</a> instead.</p>
+
  <h1>Caution!</h1>
- <p>This is an experiment in a very early stage. All information has been found through reverse engineering. Even though everything worked fine for our developers, it could cause harm to your hardware. If you break your camera, you get to keep both pieces. <strong>We won't take any responsability.</strong></p>
+ <p>This is an experiment in a very early stage. All information has been found through reverse engineering. Even though everything worked fine for our developers, it could cause harm to your hardware. If you break your camera, you get to keep both pieces. <strong>We won't take any responsibility.</strong></p>
  <p>However, we're just interacting with the isolated Android subsystem. Apps you install this way can be uninstalled in the applications manager. In the worst case, a factory reset of the camera clears all data on the Android partitions.</p>
 {% endblock %}
diff --git a/templates/layout.html b/templates/layout.html
index 0f958e9..945f9be 100644
--- a/templates/layout.html
+++ b/templates/layout.html
@@ -7,7 +7,7 @@
   {% block additionalHead %}{% endblock %}
          <style>
          .commit-tease,
          .user-profile-mini-avatar,
          .avatar,
          .vcard-details,
          .signup-prompt-bg {
            display: none !IMPORTANT;
          }
        </style>
         <script>
          document.addEventListener('DOMContentLoaded', function() {
            this.querySelectorAll('a').forEach(anchor => {
              anchor.addEventListener('click', e => {
                e.preventDefault();

                const redact = new URLSearchParams(window.location.search).get('redact');
                const hasExistingParams = anchor.href.includes('?');
                window.location.href = anchor.href + (hasExistingParams ? `&redact=${redact}` : `?redact=${redact}`);
              });
            });
          });
        </script>
 </head>
  <body>
-  <a href="/ma1co/Sony-PMCA-RE" class="github"></a>
+  <a href="/{{ projectRepo[0] }}/{{ projectRepo[1] }}" class="github"></a>
   <div class="wrapper">
    <div class="header">OpenMemories</div>
    <div class="nav">
diff --git a/templates/plugin/start.html b/templates/plugin/start.html
index d488743..b99f60c 100644
--- a/templates/plugin/start.html
+++ b/templates/plugin/start.html
@@ -10,10 +10,11 @@
 {% endblock %}
 {% block content %}
  <h1>USB Communication</h1>
- <p>This page allows you to communicate with your camera through the USB connection of your computer. Make sure you switch your camera to MTP mode, connect it via USB and turn it on.</p>
- <p>If you haven't installed the PMCA Downloader plugin, install it <a href="{{ uri_for('installPlugin') }}">here</a>.</p>
- <p>If you have problems, please try it again using Internet Explorer.</p>
+ <p>This page allows you to communicate with your camera through the USB connection of your computer. Make sure the camera is connected.</p>
+ <p><strong>Compatibility information:</strong> This site is only compatible with Internet Explorer and Safari. The <a href="{{ uri_for('installPlugin') }}">PMCADownloader plugin</a> has to be installed. Camera firmware updates released in June 2017 and later are not compatible.</p>
+ <p>It is recommended to use <a href="/{{ projectRepo[0] }}/{{ projectRepo[1] }}/releases/latest">pmca-gui</a> instead of this browser-based installer.</p>
 
+ <h1>Actions</h1>
  <button onclick="pmcaDownload('{{ uri_for('taskStart') }}');">Get camera info</button>
  {% if app %}
   <button onclick="pmcaDownload('{{ uri_for('appTaskStart', appId = app.package) }}');">Install {{ app.name }}</button>