CEC driver compmatible with imx6 libcec #7

wolfgar · 2014-04-29T21:13:03Z

Hi
Here are commits which update the CEC driver so that it can work properly faced to https://github.com/xbmc-imx6/libcec
Main updates compared to the original freescale driver are

The ones described in this old blog post
Proper cec event on link connection/disconnection
Fix CEC clock which was disabled on some events (link connection and FB mode change)
Fix issue with cec interrupts which could be muted on link connection/disconnection
Best regards
Stephan

This commit pushes all changes I did in the 3.0.35 kernel to improve/fix its behavior with libcec port for imx6 It also fixes CEC clock handling in case of FB mode change event and of HDMI cable disconnection

in case the CEC_STAT register was 0, the worker was not invoked and as a consequence the interrupts were not unmuted Also try to play better with the interrupt sharing with hmdi_video

CEC driver compmatible with imx6 libcec

commit d25f06e upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…rnel/git/dhowells/linux-fs Pull FS-Cache updates from David Howells: "This contains a number of fixes for various FS-Cache issues plus some cleanups. The commits are, in order: 1) Provide a system wait_on_atomic_t() and wake_up_atomic_t() sharing the bit-wait table (enhancement for #8). 2) Don't put spin_lock() in a while-condition as spin_lock() may have a do {} while(0) wrapper (cleanup). 3) Symbolically name i_mutex lock classes rather than using numbers in CacheFiles (cleanup). 4) Don't sleep in page release if __GFP_FS is not set (deadlock vs ext4). 5) Uninline fscache_object_init() (cleanup for #7). 6) Wrap checks on object state (cleanup for #7). 7) Simplify the object state machine by separating work states from wait states. 8) Simplify cookie retention by objects (NULL pointer deref fix). 9) Remove unused list_to_page() macro (cleanup). 10) Make the remaining-pages counter in the retrieval op atomic (assertion failure fix). 11) Don't use spin_is_locked() in assertions (assertion failure fix)" * tag 'fscache-20130702' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: FS-Cache: Don't use spin_is_locked() in assertions FS-Cache: The retrieval remaining-pages counter needs to be atomic_t cachefiles: remove unused macro list_to_page() FS-Cache: Simplify cookie retention for fscache_objects, fixing oops FS-Cache: Fix object state machine to have separate work and wait states FS-Cache: Wrap checks on object state FS-Cache: Uninline fscache_object_init() FS-Cache: Don't sleep in page release if __GFP_FS is not set CacheFiles: name i_mutex lock class explicitly fs/fscache: remove spin_lock() from the condition in while() Add wait_on_atomic_t() and wake_up_atomic_t()

Several people reported the warning: "kernel BUG at kernel/timer.c:729!" and the stack trace is: #7 [ffff880214d25c10] mod_timer+501 at ffffffff8106d905 #8 [ffff880214d25c50] br_multicast_del_pg.isra.20+261 at ffffffffa0731d25 [bridge] #9 [ffff880214d25c80] br_multicast_disable_port+88 at ffffffffa0732948 [bridge] #10 [ffff880214d25cb0] br_stp_disable_port+154 at ffffffffa072bcca [bridge] #11 [ffff880214d25ce8] br_device_event+520 at ffffffffa072a4e8 [bridge] #12 [ffff880214d25d18] notifier_call_chain+76 at ffffffff8164aafc #13 [ffff880214d25d50] raw_notifier_call_chain+22 at ffffffff810858f6 #14 [ffff880214d25d60] call_netdevice_notifiers+45 at ffffffff81536aad #15 [ffff880214d25d80] dev_close_many+183 at ffffffff81536d17 #16 [ffff880214d25dc0] rollback_registered_many+168 at ffffffff81537f68 #17 [ffff880214d25de8] rollback_registered+49 at ffffffff81538101 #18 [ffff880214d25e10] unregister_netdevice_queue+72 at ffffffff815390d8 #19 [ffff880214d25e30] __tun_detach+272 at ffffffffa074c2f0 [tun] #20 [ffff880214d25e88] tun_chr_close+45 at ffffffffa074c4bd [tun] #21 [ffff880214d25ea8] __fput+225 at ffffffff8119b1f1 #22 [ffff880214d25ef0] ____fput+14 at ffffffff8119b3fe #23 [ffff880214d25f00] task_work_run+159 at ffffffff8107cf7f #24 [ffff880214d25f30] do_notify_resume+97 at ffffffff810139e1 #25 [ffff880214d25f50] int_signal+18 at ffffffff8164f292 this is due to I forgot to check if mp->timer is armed in br_multicast_del_pg(). This bug is introduced by commit 9f00b2e (bridge: only expire the mdb entry when query is received). Same for __br_mdb_del(). Tested-by: poma <pomidorabelisima@gmail.com> Reported-by: LiYonghua <809674045@qq.com> Reported-by: Robert Hancock <hancockrwd@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>

We used to keep the port's char device structs and the /sys entries around till the last reference to the port was dropped. This is actually unnecessary, and resulted in buggy behaviour: 1. Open port in guest 2. Hot-unplug port 3. Hot-plug a port with the same 'name' property as the unplugged one This resulted in hot-plug being unsuccessful, as a port with the same name already exists (even though it was unplugged). This behaviour resulted in a warning message like this one: -------------------8<--------------------------------------- WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted) Hardware name: KVM sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:04.0/virtio0/virtio-ports/vport0p1' Call Trace: [<ffffffff8106b607>] ? warn_slowpath_common+0x87/0xc0 [<ffffffff8106b6f6>] ? warn_slowpath_fmt+0x46/0x50 [<ffffffff811f2319>] ? sysfs_add_one+0xc9/0x130 [<ffffffff811f23e8>] ? create_dir+0x68/0xb0 [<ffffffff811f2469>] ? sysfs_create_dir+0x39/0x50 [<ffffffff81273129>] ? kobject_add_internal+0xb9/0x260 [<ffffffff812733d8>] ? kobject_add_varg+0x38/0x60 [<ffffffff812734b4>] ? kobject_add+0x44/0x70 [<ffffffff81349de4>] ? get_device_parent+0xf4/0x1d0 [<ffffffff8134b389>] ? device_add+0xc9/0x650 -------------------8<--------------------------------------- Instead of relying on guest applications to release all references to the ports, we should go ahead and unregister the port from all the core layers. Any open/read calls on the port will then just return errors, and an unplug/plug operation on the host will succeed as expected. This also caused buggy behaviour in case of the device removal (not just a port): when the device was removed (which means all ports on that device are removed automatically as well), the ports with active users would clean up only when the last references were dropped -- and it would be too late then to be referencing char device pointers, resulting in oopses: -------------------8<--------------------------------------- PID: 6162 TASK: ffff8801147ad500 CPU: 0 COMMAND: "cat" #0 [ffff88011b9d5a90] machine_kexec at ffffffff8103232b #1 [ffff88011b9d5af0] crash_kexec at ffffffff810b9322 #2 [ffff88011b9d5bc0] oops_end at ffffffff814f4a50 #3 [ffff88011b9d5bf0] die at ffffffff8100f26b #4 [ffff88011b9d5c20] do_general_protection at ffffffff814f45e2 #5 [ffff88011b9d5c50] general_protection at ffffffff814f3db5 [exception RIP: strlen+2] RIP: ffffffff81272ae2 RSP: ffff88011b9d5d00 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880118901c18 RCX: 0000000000000000 RDX: ffff88011799982c RSI: 00000000000000d0 RDI: 3a303030302f3030 RBP: ffff88011b9d5d38 R8: 0000000000000006 R9: ffffffffa0134500 R10: 0000000000001000 R11: 0000000000001000 R12: ffff880117a1cc10 R13: 00000000000000d0 R14: 0000000000000017 R15: ffffffff81aff700 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #6 [ffff88011b9d5d00] kobject_get_path at ffffffff8126dc5d #7 [ffff88011b9d5d40] kobject_uevent_env at ffffffff8126e551 #8 [ffff88011b9d5dd0] kobject_uevent at ffffffff8126e9eb #9 [ffff88011b9d5de0] device_del at ffffffff813440c7 -------------------8<--------------------------------------- So clean up when we have all the context, and all that's left to do when the references to the port have dropped is to free up the port struct itself. CC: <stable@vger.kernel.org> Reported-by: chayang <chayang@redhat.com> Reported-by: YOGANANTH SUBRAMANIAN <anantyog@in.ibm.com> Reported-by: FuXiangChun <xfu@redhat.com> Reported-by: Qunfang Zhang <qzhang@redhat.com> Reported-by: Sibiao Luo <sluo@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

In several places, this snippet is used when removing neigh entries: list_del(&neigh->list); ipoib_neigh_free(neigh); The list_del() removes neigh from the associated struct ipoib_path, while ipoib_neigh_free() removes neigh from the device's neigh entry lookup table. Both of these operations are protected by the priv->lock spinlock. The table however is also protected via RCU, and so naturally the lock is not held when doing reads. This leads to a race condition, in which a thread may successfully look up a neigh entry that has already been deleted from neigh->list. Since the previous deletion will have marked the entry with poison, a second list_del() on the object will cause a panic: #5 [ffff8802338c3c70] general_protection at ffffffff815108c5 [exception RIP: list_del+16] RIP: ffffffff81289020 RSP: ffff8802338c3d20 RFLAGS: 00010082 RAX: dead000000200200 RBX: ffff880433e60c88 RCX: 0000000000009e6c RDX: 0000000000000246 RSI: ffff8806012ca298 RDI: ffff880433e60c88 RBP: ffff8802338c3d30 R8: ffff8806012ca2e8 R9: 00000000ffffffff R10: 0000000000000001 R11: 0000000000000000 R12: ffff8804346b2020 R13: ffff88032a3e7540 R14: ffff8804346b26e0 R15: 0000000000000246 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 #6 [ffff8802338c3d38] ipoib_cm_tx_handler at ffffffffa066fe0a [ib_ipoib] #7 [ffff8802338c3d98] cm_process_work at ffffffffa05149a7 [ib_cm] #8 [ffff8802338c3de8] cm_work_handler at ffffffffa05161aa [ib_cm] #9 [ffff8802338c3e38] worker_thread at ffffffff81090e10 #10 [ffff8802338c3ee8] kthread at ffffffff81096c66 #11 [ffff8802338c3f48] kernel_thread at ffffffff8100c0ca We move the list_del() into ipoib_neigh_free(), so that deletion happens only once, after the entry has been successfully removed from the lookup table. This same behavior is already used in ipoib_del_neighs_by_gid() and __ipoib_reap_neigh(). Signed-off-by: Jim Foraker <foraker1@llnl.gov> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>

On OMAP4 we have clk_set_rate()s being done for a few DPLL clock nodes, as part of the clock init code, since the bootloaders no longer locks these DPLLs. So we have a clk_set_rate() done for a ABE DPLL node (which inturn locks it) followed by a clk_set_rate() for the USB DPLL. With USB DPLL being in bypass, we have this parent->child relationship thats formed while the clocks get registered. dpll_abe_ck | V dpll_abe_x2_ck | V dpll_abe_m3x2_ck | V usb_hs_clk_div_ck | V dpll_usb_ck This is because usb_hs_clk_div_ck is bypass clock for dpll_usb_ck. So with this parent->child relationship in place, a clk_set_rate() on ABE DPLL results eventually in a clk_set_rate() call on USB DPLL, because CCF does a clk_change_rate() (as part of clk_set_rate()) on all downstream clocks resulting from a rate change on the top clock. So its important that we lock USB DPLL before we lock ABE DPLL. Without which we see these error logs at boot. [These error logs will not be seen if using a bootloader that locks USB DPLL] [ 0.000000] clock: dpll_usb_ck failed transition to 'locked' [ 0.000000] Division by zero in kernel. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7 [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14) [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10) [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114) [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8) [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8) [ 0.000000] Division by zero in kernel. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7 [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14) [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10) [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114) [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8) [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8) [ 0.000000] Division by zero in kernel. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7 [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14) [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10) [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114) [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8) [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8) [ 0.000000] Division by zero in kernel. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7 [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14) [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10) [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114) [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8) [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8) [ 0.000000] Division by zero in kernel. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7 [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14) [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10) [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114) [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8) [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8) [ 0.000000] Division by zero in kernel. [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-03445-gfb2af00-dirty #7 [ 0.000000] [<c001bfe8>] (unwind_backtrace+0x0/0xf4) from [<c001868c>] (show_stack+0x10/0x14) [ 0.000000] [<c001868c>] (show_stack+0x10/0x14) from [<c02deb28>] (Ldiv0+0x8/0x10) [ 0.000000] [<c02deb28>] (Ldiv0+0x8/0x10) from [<c0477030>] (clk_divider_set_rate+0x10/0x114) [ 0.000000] [<c0477030>] (clk_divider_set_rate+0x10/0x114) from [<c0476ef4>] (clk_change_rate+0x38/0xb8) [ 0.000000] [<c0476ef4>] (clk_change_rate+0x38/0xb8) from [<c0476f5c>] (clk_change_rate+0xa0/0xb8) [ 0.000000] clock: trace_clk_div_ck: could not find divisor for target rate 0 for parent pmd_trace_clk_mux_ck [ 0.000000] Division by zero in kernel. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>

When booting secondary CPUs, announce_cpu() is called to show which cpu has been brought up. For example: [ 0.402751] smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 OK [ 0.525667] smpboot: Booting Node 1, Processors #6 #7 #8 #9 #10 #11 OK [ 0.755592] smpboot: Booting Node 0, Processors #12 #13 #14 #15 #16 #17 OK [ 0.890495] smpboot: Booting Node 1, Processors #18 #19 #20 #21 #22 #23 But the last "OK" is lost, because 'nr_cpu_ids-1' represents the maximum possible cpu id. It should use the maximum present cpu id in case not all CPUs booted up. Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <guohanjun@huawei.com> Cc: <wangyijing@huawei.com> Cc: <fenghua.yu@intel.com> Cc: <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1378378676-18276-1-git-send-email-huawei.libin@huawei.com [ tweaked the changelog, removed unnecessary line break, tweaked the format to align the fields vertically. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>

When parsing lines from objdump a line containing source code starting with a numeric label is mistaken for a line of disassembly starting with a memory address. Current validation fails to recognise that the "memory address" is out of range and calculates an invalid offset which later causes this segfault: Program received signal SIGSEGV, Segmentation fault. 0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50) at util/annotate.c:631 631 hits += h->addr[offset++]; (gdb) bt #0 0x0000000000457315 in disasm__calc_percent (notes=0xc98970, evidx=0, offset=143705, end=2127526177, path=0x7fffffffbf50) at util/annotate.c:631 #1 0x00000000004d65e3 in annotate_browser__calc_percent (browser=0x7fffffffd130, evsel=0xa01da0) at ui/browsers/annotate.c:364 #2 0x00000000004d7433 in annotate_browser__run (browser=0x7fffffffd130, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:672 #3 0x00000000004d80c9 in symbol__tui_annotate (sym=0xc989a0, map=0xa02660, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:962 #4 0x00000000004d7aa0 in hist_entry__tui_annotate (he=0xdf73f0, evsel=0xa01da0, hbt=0x0) at ui/browsers/annotate.c:823 #5 0x00000000004dd648 in perf_evsel__hists_browse (evsel=0xa01da0, nr_events=1, helpline= 0x58b768 "For a higher level overview, try: perf report --sort comm,dso", ev_name=0xa02cd0 "cycles", left_exits=false, hbt= 0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1659 #6 0x00000000004de372 in perf_evlist__tui_browse_hists (evlist=0xa01520, help= 0x58b768 "For a higher level overview, try: perf report --sort comm,dso", hbt=0x0, min_pcnt=0, env=0xa011e0) at ui/browsers/hists.c:1950 #7 0x000000000042cf6b in __cmd_report (rep=0x7fffffffd6c0) at builtin-report.c:581 #8 0x000000000042e25d in cmd_report (argc=0, argv=0x7fffffffe4b0, prefix=0x0) at builtin-report.c:965 #9 0x000000000041a0e1 in run_builtin (p=0x801548, argc=1, argv=0x7fffffffe4b0) at perf.c:319 #10 0x000000000041a319 in handle_internal_command (argc=1, argv=0x7fffffffe4b0) at perf.c:376 #11 0x000000000041a465 in run_argv (argcp=0x7fffffffe38c, argv=0x7fffffffe380) at perf.c:420 #12 0x000000000041a707 in main (argc=1, argv=0x7fffffffe4b0) at perf.c:521 After the fix is applied the symbol can be annotated showing the problematic line "1: rep" copy_user_generic_string /usr/lib/debug/lib/modules/3.9.10-100.fc17.x86_64/vmlinux */ ENTRY(copy_user_generic_string) CFI_STARTPROC ASM_STAC andl %edx,%edx and %edx,%edx jz 4f je 37 cmpl $8,%edx cmp $0x8,%edx jb 2f /* less than 8 bytes, go to byte copy loop */ jb 33 ALIGN_DESTINATION mov %edi,%ecx and $0x7,%ecx je 28 sub $0x8,%ecx neg %ecx sub %ecx,%edx 1a: mov (%rsi),%al mov %al,(%rdi) inc %rsi inc %rdi dec %ecx jne 1a movl %edx,%ecx 28: mov %edx,%ecx shrl $3,%ecx shr $0x3,%ecx andl $7,%edx and $0x7,%edx 1: rep 100.00 rep movsq %ds:(%rsi),%es:(%rdi) movsq 2: movl %edx,%ecx 33: mov %edx,%ecx 3: rep rep movsb %ds:(%rsi),%es:(%rdi) movsb 4: xorl %eax,%eax 37: xor %eax,%eax data32 xchg %ax,%ax ASM_CLAC ret retq Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1379009721-27667-1-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.644008] smpboot: Booting Node 1, Processors: #8 #9 #10 #11 #12 #13 #14 #15 OK [ 1.245006] smpboot: Booting Node 2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK [ 1.864005] smpboot: Booting Node 3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK [ 2.489005] smpboot: Booting Node 4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK [ 3.093005] smpboot: Booting Node 5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK [ 3.698005] smpboot: Booting Node 6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK [ 4.304005] smpboot: Booting Node 7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 #6 #7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Libin <huawei.libin@huawei.com> Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.603005] .... node #1, CPUs: #8 #9 #10 #11 #12 #13 #14 #15 [ 1.200005] .... node #2, CPUs: #16 #17 #18 #19 #20 #21 #22 #23 [ 1.796005] .... node #3, CPUs: #24 #25 #26 #27 #28 #29 #30 #31 [ 2.393005] .... node #4, CPUs: #32 #33 #34 #35 #36 #37 #38 #39 [ 2.996005] .... node #5, CPUs: #40 #41 #42 #43 #44 #45 #46 #47 [ 3.600005] .... node #6, CPUs: #48 #49 #50 #51 #52 #53 #54 #55 [ 4.202005] .... node #7, CPUs: #56 #57 #58 #59 #60 #61 #62 #63 [ 4.811005] .... node #8, CPUs: #64 #65 #66 #67 #68 #69 #70 #71 [ 5.421006] .... node #9, CPUs: #72 #73 #74 #75 #76 #77 #78 #79 [ 6.032005] .... node #10, CPUs: #80 #81 #82 #83 #84 #85 #86 #87 [ 6.648006] .... node #11, CPUs: #88 #89 #90 #91 #92 #93 #94 #95 [ 7.262005] .... node #12, CPUs: #96 #97 #98 #99 #100 #101 #102 #103 [ 7.865005] .... node #13, CPUs: #104 #105 #106 #107 #108 #109 #110 #111 [ 8.466005] .... node #14, CPUs: #112 #113 #114 #115 #116 #117 #118 #119 [ 9.073006] .... node #15, CPUs: #120 #121 #122 #123 #124 #125 #126 #127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

Andrey reported the following report: ERROR: AddressSanitizer: heap-buffer-overflow on address ffff8800359c99f3 ffff8800359c99f3 is located 0 bytes to the right of 243-byte region [ffff8800359c9900, ffff8800359c99f3) Accessed by thread T13003: #0 ffffffff810dd2da (asan_report_error+0x32a/0x440) #1 ffffffff810dc6b0 (asan_check_region+0x30/0x40) #2 ffffffff810dd4d3 (__tsan_write1+0x13/0x20) #3 ffffffff811cd19e (ftrace_regex_release+0x1be/0x260) #4 ffffffff812a1065 (__fput+0x155/0x360) #5 ffffffff812a12de (____fput+0x1e/0x30) #6 ffffffff8111708d (task_work_run+0x10d/0x140) #7 ffffffff810ea043 (do_exit+0x433/0x11f0) #8 ffffffff810eaee4 (do_group_exit+0x84/0x130) #9 ffffffff810eafb1 (SyS_exit_group+0x21/0x30) #10 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Allocated by thread T5167: #0 ffffffff810dc778 (asan_slab_alloc+0x48/0xc0) #1 ffffffff8128337c (__kmalloc+0xbc/0x500) #2 ffffffff811d9d54 (trace_parser_get_init+0x34/0x90) #3 ffffffff811cd7b3 (ftrace_regex_open+0x83/0x2e0) #4 ffffffff811cda7d (ftrace_filter_open+0x2d/0x40) #5 ffffffff8129b4ff (do_dentry_open+0x32f/0x430) #6 ffffffff8129b668 (finish_open+0x68/0xa0) #7 ffffffff812b66ac (do_last+0xb8c/0x1710) #8 ffffffff812b7350 (path_openat+0x120/0xb50) #9 ffffffff812b8884 (do_filp_open+0x54/0xb0) #10 ffffffff8129d36c (do_sys_open+0x1ac/0x2c0) #11 ffffffff8129d4b7 (SyS_open+0x37/0x50) #12 ffffffff81928782 (system_call_fastpath+0x16/0x1b) Shadow bytes around the buggy address: ffff8800359c9700: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd ffff8800359c9780: fd fd fd fd fd fd fd fd fa fa fa fa fa fa fa fa ffff8800359c9800: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9880: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 =>ffff8800359c9980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00[03]fb ffff8800359c9a00: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9a80: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa ffff8800359c9b00: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00 ffff8800359c9b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800359c9c00: 00 00 00 00 00 00 00 00 fa fa fa fa fa fa fa fa Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap redzone: fa Heap kmalloc redzone: fb Freed heap region: fd Shadow gap: fe The out-of-bounds access happens on 'parser->buffer[parser->idx] = 0;' Although the crash happened in ftrace_regex_open() the real bug occurred in trace_get_user() where there's an incrementation to parser->idx without a check against the size. The way it is triggered is if userspace sends in 128 characters (EVENT_BUF_SIZE + 1), the loop that reads the last character stores it and then breaks out because there is no more characters. Then the last character is read to determine what to do next, and the index is incremented without checking size. Then the caller of trace_get_user() usually nulls out the last character with a zero, but since the index is equal to the size, it writes a nul character after the allocated space, which can corrupt memory. Luckily, only root user has write access to this file. Link: http://lkml.kernel.org/r/20131009222323.04fd1a0d@gandalf.local.home Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

…ux/kernel/git/tip/tip Pull x86 boot changes from Ingo Molnar: "Two changes that prettify and compactify the SMP bootup output from: smpboot: Booting Node 0, Processors #1 #2 #3 OK smpboot: Booting Node 1, Processors #4 #5 #6 #7 OK smpboot: Booting Node 2, Processors #8 #9 #10 #11 OK smpboot: Booting Node 3, Processors #12 #13 #14 #15 OK Brought up 16 CPUs to something like: x86: Booting SMP configuration: .... node #0, CPUs: #1 #2 #3 .... node #1, CPUs: #4 #5 #6 #7 .... node #2, CPUs: #8 #9 #10 #11 .... node #3, CPUs: #12 #13 #14 #15 x86: Booted up 4 nodes, 16 CPUs" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Further compress CPUs bootup message x86: Improve the printout of the SMP bootup CPU table

Commit 8c4f3c3 "ftrace: Check module functions being traced on reload" fixed module loading and unloading with respect to function tracing, but it missed the function graph tracer. If you perform the following # cd /sys/kernel/debug/tracing # echo function_graph > current_tracer # modprobe nfsd # echo nop > current_tracer You'll get the following oops message: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 2910 at /linux.git/kernel/trace/ftrace.c:1640 __ftrace_hash_rec_update.part.35+0x168/0x1b9() Modules linked in: nfsd exportfs nfs_acl lockd ipt_MASQUERADE sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables uinput snd_hda_codec_idt CPU: 2 PID: 2910 Comm: bash Not tainted 3.13.0-rc1-test #7 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007 0000000000000668 ffff8800787efcf8 ffffffff814fe193 ffff88007d500000 0000000000000000 ffff8800787efd38 ffffffff8103b80a 0000000000000668 ffffffff810b2b9a ffffffff81a48370 0000000000000001 ffff880037aea000 Call Trace: [<ffffffff814fe193>] dump_stack+0x4f/0x7c [<ffffffff8103b80a>] warn_slowpath_common+0x81/0x9b [<ffffffff810b2b9a>] ? __ftrace_hash_rec_update.part.35+0x168/0x1b9 [<ffffffff8103b83e>] warn_slowpath_null+0x1a/0x1c [<ffffffff810b2b9a>] __ftrace_hash_rec_update.part.35+0x168/0x1b9 [<ffffffff81502f89>] ? __mutex_lock_slowpath+0x364/0x364 [<ffffffff810b2cc2>] ftrace_shutdown+0xd7/0x12b [<ffffffff810b47f0>] unregister_ftrace_graph+0x49/0x78 [<ffffffff810c4b30>] graph_trace_reset+0xe/0x10 [<ffffffff810bf393>] tracing_set_tracer+0xa7/0x26a [<ffffffff810bf5e1>] tracing_set_trace_write+0x8b/0xbd [<ffffffff810c501c>] ? ftrace_return_to_handler+0xb2/0xde [<ffffffff811240a8>] ? __sb_end_write+0x5e/0x5e [<ffffffff81122aed>] vfs_write+0xab/0xf6 [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85 [<ffffffff81122dbd>] SyS_write+0x59/0x82 [<ffffffff8150a185>] ftrace_graph_caller+0x85/0x85 [<ffffffff8150a2d2>] system_call_fastpath+0x16/0x1b ---[ end trace 940358030751eafb ]--- The above mentioned commit didn't go far enough. Well, it covered the function tracer by adding checks in __register_ftrace_function(). The problem is that the function graph tracer circumvents that (for a slight efficiency gain when function graph trace is running with a function tracer. The gain was not worth this). The problem came with ftrace_startup() which should always be called after __register_ftrace_function(), if you want this bug to be completely fixed. Anyway, this solution moves __register_ftrace_function() inside of ftrace_startup() and removes the need to call them both. Reported-by: Dave Wysochanski <dwysocha@redhat.com> Fixes: ed926f9 ("ftrace: Use counters to enable functions to trace") Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

…ices Data structure drhd->iommu is shared between DMA remapping driver and interrupt remapping driver, so DMA remapping driver shouldn't release drhd->iommu when it failed to initialize IOMMU devices. Otherwise it may cause invalid memory access to the interrupt remapping driver. Sample stack dump: [ 13.315090] BUG: unable to handle kernel paging request at ffffc9000605a088 [ 13.323221] IP: [<ffffffff81461bac>] qi_submit_sync+0x15c/0x400 [ 13.330107] PGD 82f81e067 PUD c2f81e067 PMD 82e846067 PTE 0 [ 13.336818] Oops: 0002 [#1] SMP [ 13.340757] Modules linked in: [ 13.344422] CPU: 0 PID: 4 Comm: kworker/0:0 Not tainted 3.13.0-rc1-gerry+ #7 [ 13.352474] Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.99.99.x059.091020121352 09/10/2012 [ 13.365659] Workqueue: events work_for_cpu_fn [ 13.370774] task: ffff88042ddf00d0 ti: ffff88042ddee000 task.ti: ffff88042dde e000 [ 13.379389] RIP: 0010:[<ffffffff81461bac>] [<ffffffff81461bac>] qi_submit_sy nc+0x15c/0x400 [ 13.389055] RSP: 0000:ffff88042ddef940 EFLAGS: 00010002 [ 13.395151] RAX: 00000000000005e0 RBX: 0000000000000082 RCX: 0000000200000025 [ 13.403308] RDX: ffffc9000605a000 RSI: 0000000000000010 RDI: ffff88042ddb8610 [ 13.411446] RBP: ffff88042ddef9a0 R08: 00000000000005d0 R09: 0000000000000001 [ 13.419599] R10: 0000000000000000 R11: 000000000000005d R12: 000000000000005c [ 13.427742] R13: ffff88102d84d300 R14: 0000000000000174 R15: ffff88042ddb4800 [ 13.435877] FS: 0000000000000000(0000) GS:ffff88043de00000(0000) knlGS:00000 00000000000 [ 13.445168] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 13.451749] CR2: ffffc9000605a088 CR3: 0000000001a0b000 CR4: 00000000000407f0 [ 13.459895] Stack: [ 13.462297] ffff88042ddb85d0 000000000000005d ffff88042ddef9b0 0000000000000 5d0 [ 13.471147] 00000000000005c0 ffff88042ddb8000 000000000000005c 0000000000000 015 [ 13.480001] ffff88042ddb4800 0000000000000282 ffff88042ddefa40 ffff88042ddef ac0 [ 13.488855] Call Trace: [ 13.491771] [<ffffffff8146848d>] modify_irte+0x9d/0xd0 [ 13.497778] [<ffffffff8146886d>] intel_setup_ioapic_entry+0x10d/0x290 [ 13.505250] [<ffffffff810a92a6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [ 13.512824] [<ffffffff810346b0>] ? default_init_apic_ldr+0x60/0x60 [ 13.519998] [<ffffffff81468be0>] setup_ioapic_remapped_entry+0x20/0x30 [ 13.527566] [<ffffffff8103683a>] io_apic_setup_irq_pin+0x12a/0x2c0 [ 13.534742] [<ffffffff8136673b>] ? acpi_pci_irq_find_prt_entry+0x2b9/0x2d8 [ 13.544102] [<ffffffff81037fd5>] io_apic_setup_irq_pin_once+0x85/0xa0 [ 13.551568] [<ffffffff8103816f>] ? mp_find_ioapic_pin+0x8f/0xf0 [ 13.558434] [<ffffffff81038044>] io_apic_set_pci_routing+0x34/0x70 [ 13.565621] [<ffffffff8102f4cf>] mp_register_gsi+0xaf/0x1c0 [ 13.572111] [<ffffffff8102f5ee>] acpi_register_gsi_ioapic+0xe/0x10 [ 13.579286] [<ffffffff8102f33f>] acpi_register_gsi+0xf/0x20 [ 13.585779] [<ffffffff81366b86>] acpi_pci_irq_enable+0x171/0x1e3 [ 13.592764] [<ffffffff8146d771>] pcibios_enable_device+0x31/0x40 [ 13.599744] [<ffffffff81320e9b>] do_pci_enable_device+0x3b/0x60 [ 13.606633] [<ffffffff81322248>] pci_enable_device_flags+0xc8/0x120 [ 13.613887] [<ffffffff813222f3>] pci_enable_device+0x13/0x20 [ 13.620484] [<ffffffff8132fa7e>] pcie_port_device_register+0x1e/0x510 [ 13.627947] [<ffffffff810a92a6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [ 13.635510] [<ffffffff810a947d>] ? trace_hardirqs_on+0xd/0x10 [ 13.642189] [<ffffffff813302b8>] pcie_portdrv_probe+0x58/0xc0 [ 13.648877] [<ffffffff81323ba5>] local_pci_probe+0x45/0xa0 [ 13.655266] [<ffffffff8106bc44>] work_for_cpu_fn+0x14/0x20 [ 13.661656] [<ffffffff8106fa79>] process_one_work+0x369/0x710 [ 13.668334] [<ffffffff8106fa02>] ? process_one_work+0x2f2/0x710 [ 13.675215] [<ffffffff81071d56>] ? worker_thread+0x46/0x690 [ 13.681714] [<ffffffff81072194>] worker_thread+0x484/0x690 [ 13.688109] [<ffffffff81071d10>] ? cancel_delayed_work_sync+0x20/0x20 [ 13.695576] [<ffffffff81079c60>] kthread+0xf0/0x110 [ 13.701300] [<ffffffff8108e7bf>] ? local_clock+0x3f/0x50 [ 13.707492] [<ffffffff81079b70>] ? kthread_create_on_node+0x250/0x250 [ 13.714959] [<ffffffff81574d2c>] ret_from_fork+0x7c/0xb0 [ 13.721152] [<ffffffff81079b70>] ? kthread_create_on_node+0x250/0x250 Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <joro@8bytes.org>

Currently, update_note_header_size_elf64() and update_note_header_size_elf32() will add the size of a PT_NOTE entry to real_sz even if that causes real_sz to exceeds max_sz. This patch corrects the while loop logic in those routines to ensure that does not happen and prints a warning if a PT_NOTE entry is dropped. If zero PT_NOTE entries are found or this condition is encountered because the only entry was dropped, a warning is printed and an error is returned. One possible negative side effect of exceeding the max_sz limit is an allocation failure in merge_note_headers_elf64() or merge_note_headers_elf32() which would produce console output such as the following while booting the crash kernel. vmalloc: allocation failure: 14076997632 bytes swapper/0: page allocation failure: order:0, mode:0x80d2 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-gbp1 #7 Call Trace: dump_stack+0x19/0x1b warn_alloc_failed+0xf0/0x160 __vmalloc_node_range+0x19e/0x250 vmalloc_user+0x4c/0x70 merge_note_headers_elf64.constprop.9+0x116/0x24a vmcore_init+0x2d4/0x76c do_one_initcall+0xe2/0x190 kernel_init_freeable+0x17c/0x207 kernel_init+0xe/0x180 ret_from_fork+0x7c/0xb0 Kdump: vmcore not initialized kdump: dump target is /dev/sda4 kdump: saving to /sysroot//var/crash/127.0.0.1-2014.01.28-13:58:52/ kdump: saving vmcore-dmesg.txt Cannot open /proc/vmcore: No such file or directory kdump: saving vmcore-dmesg.txt failed kdump: saving vmcore kdump: saving vmcore failed This type of failure has been seen on a four socket prototype system with certain memory configurations. Most PT_NOTE sections have a single entry similar to: n_namesz = 0x5 n_descsz = 0x150 n_type = 0x1 Occasionally, a second entry is encountered with very large n_namesz and n_descsz sizes: n_namesz = 0x80000008 n_descsz = 0x510ae163 n_type = 0x80000008 Not yet sure of the source of these extra entries, they seem bogus, but they shouldn't cause crash dump to fail. Signed-off-by: Greg Pearson <greg.pearson@hp.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I noticed that after hot unplugging a Logitech unifying receiver (drivers/hid/hid-logitech-dj.c) the kernel would occasionally spew a stack trace similar to this: usb 1-1.1.2: USB disconnect, device number 7 WARNING: CPU: 0 PID: 2865 at fs/sysfs/group.c:216 device_del+0x40/0x1b0() sysfs group ffffffff8187fa20 not found for kobject 'hidraw0' [...] CPU: 0 PID: 2865 Comm: upowerd Tainted: G W 3.14.0-rc4 #7 Hardware name: LENOVO 7783PN4/ , BIOS 9HKT43AUS 07/11/2011 0000000000000009 ffffffff814cd684 ffff880427ccfdf8 ffffffff810616e7 ffff88041ec61800 ffff880427ccfe48 ffff88041e444d80 ffff880426fab8e8 ffff880429359960 ffffffff8106174c ffffffff81714b98 0000000000000028 Call Trace: [<ffffffff814cd684>] ? dump_stack+0x41/0x51 [<ffffffff810616e7>] ? warn_slowpath_common+0x77/0x90 [<ffffffff8106174c>] ? warn_slowpath_fmt+0x4c/0x50 [<ffffffff81374fd0>] ? device_del+0x40/0x1b0 [<ffffffff8137516f>] ? device_unregister+0x2f/0x50 [<ffffffff813751fa>] ? device_destroy+0x3a/0x40 [<ffffffffa03ca245>] ? drop_ref+0x55/0x120 [hid] [<ffffffffa03ca3e6>] ? hidraw_release+0x96/0xb0 [hid] [<ffffffff811929da>] ? __fput+0xca/0x210 [<ffffffff8107fe17>] ? task_work_run+0x97/0xd0 [<ffffffff810139a9>] ? do_notify_resume+0x69/0xa0 [<ffffffff814dbd22>] ? int_signal+0x12/0x17 ---[ end trace 63f4a46f6566d737 ]--- During device removal hid_disconnect() is called via hid_hw_stop() to stop the device and free all its resources, including the sysfs files. The problem is that if a user space process, such as upowerd, holds a reference to a hidraw file the corresponding sysfs files will be kept around (drop_ref() does not call device_destroy() if the open counter is not 0) and it will be usb_disconnect() who, by calling device_del() for the USB device, will indirectly remove the sysfs files of the hidraw device (sysfs_remove_dir() is recursive these days). Because of this, by the time user space releases the last reference to the hidraw file and drop_ref() tries to destroy the device the sysfs files are already gone and the kernel will print the warning above. Fix this by calling device_destroy() at USB disconnect time. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Cc: stable@vger.kernel.org # 3.13 Signed-off-by: Jiri Kosina <jkosina@suse.cz>

vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> CC: stable@vger.kernel.org Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>

commit 3f1f9b851311a76226140b55b1ea22111234a7c2 upstream. This fixes the following lockdep complaint: [ INFO: possible circular locking dependency detected ] 3.16.0-rc2-mm1+ linux4kix#7 Tainted: G O ------------------------------------------------------- kworker/u24:0/4356 is trying to acquire lock: (&(&sbi->s_es_lru_lock)->rlock){+.+.-.}, at: [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0 but task is already holding lock: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180 which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); lock(&ei->i_es_lock); lock(&(&sbi->s_es_lru_lock)->rlock); *** DEADLOCK *** 6 locks held by kworker/u24:0/4356: #0: ("writeback"){.+.+.+}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560 linux4kix#1: ((&(&wb->dwork)->work)){+.+.+.}, at: [<ffffffff81071d00>] process_one_work+0x180/0x560 linux4kix#2: (&type->s_umount_key#22){++++++}, at: [<ffffffff811a9c74>] grab_super_passive+0x44/0x90 linux4kix#3: (jbd2_handle){+.+...}, at: [<ffffffff812979f9>] start_this_handle+0x189/0x5f0 linux4kix#4: (&ei->i_data_sem){++++..}, at: [<ffffffff81247062>] ext4_map_blocks+0x132/0x550 linux4kix#5: (&ei->i_es_lock){++++-.}, at: [<ffffffff81286961>] ext4_es_insert_extent+0x71/0x180 stack backtrace: CPU: 0 PID: 4356 Comm: kworker/u24:0 Tainted: G O 3.16.0-rc2-mm1+ linux4kix#7 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 Workqueue: writeback bdi_writeback_workfn (flush-253:0) ffffffff8213dce0 ffff880014b07538 ffffffff815df0bb 0000000000000007 ffffffff8213e040 ffff880014b07588 ffffffff815db3dd ffff880014b07568 ffff880014b07610 ffff88003b868930 ffff88003b868908 ffff88003b868930 Call Trace: [<ffffffff815df0bb>] dump_stack+0x4e/0x68 [<ffffffff815db3dd>] print_circular_bug+0x1fb/0x20c [<ffffffff810a7a3e>] __lock_acquire+0x163e/0x1d00 [<ffffffff815e89dc>] ? retint_restore_args+0xe/0xe [<ffffffff815ddc7b>] ? __slab_alloc+0x4a8/0x4ce [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff810a8707>] lock_acquire+0x87/0x120 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff8128592d>] ? ext4_es_free_extent+0x5d/0x70 [<ffffffff815e6f09>] _raw_spin_lock+0x39/0x50 [<ffffffff81285fff>] ? __ext4_es_shrink+0x4f/0x2e0 [<ffffffff8119760b>] ? kmem_cache_alloc+0x18b/0x1a0 [<ffffffff81285fff>] __ext4_es_shrink+0x4f/0x2e0 [<ffffffff812869b8>] ext4_es_insert_extent+0xc8/0x180 [<ffffffff812470f4>] ext4_map_blocks+0x1c4/0x550 [<ffffffff8124c4c4>] ext4_writepages+0x6d4/0xd00 ... Reported-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: Minchan Kim <minchan@kernel.org> Cc: Zheng Liu <gnehzuil.liu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d3051b489aa81ca9ba62af366149ef42b8dae97c upstream. A panic was seen in the following sitation. There are two threads running on the system. The first thread is a system monitoring thread that is reading /proc/modules. The second thread is loading and unloading a module (in this example I'm using my simple dummy-module.ko). Note, in the "real world" this occurred with the qlogic driver module. When doing this, the following panic occurred: ------------[ cut here ]------------ kernel BUG at kernel/module.c:3739! invalid opcode: 0000 [#1] SMP Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module] CPU: 37 PID: 186343 Comm: cat Tainted: GF O-------------- 3.10.0+ linux4kix#7 Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013 task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000 RIP: 0010:[<ffffffff810d64c5>] [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP: 0018:ffff88080fa7fe18 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000 RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000 RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000 R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000 FS: 00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00 ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0 Call Trace: [<ffffffff810d666c>] m_show+0x19c/0x1e0 [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0 [<ffffffff812281ed>] proc_reg_read+0x3d/0x80 [<ffffffff811c0f2c>] vfs_read+0x9c/0x170 [<ffffffff811c1a58>] SyS_read+0x58/0xb0 [<ffffffff81605829>] system_call_fastpath+0x16/0x1b Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RIP [<ffffffff810d64c5>] module_flags+0xb5/0xc0 RSP <ffff88080fa7fe18> Consider the two processes running on the system. CPU 0 (/proc/modules reader) CPU 1 (loading/unloading module) CPU 0 opens /proc/modules, and starts displaying data for each module by traversing the modules list via fs/seq_file.c:seq_open() and fs/seq_file.c:seq_read(). For each module in the modules list, seq_read does op->start() <-- this is a pointer to m_start() op->show() <- this is a pointer to m_show() op->stop() <-- this is a pointer to m_stop() The m_start(), m_show(), and m_stop() module functions are defined in kernel/module.c. The m_start() and m_stop() functions acquire and release the module_mutex respectively. ie) When reading /proc/modules, the module_mutex is acquired and released for each module. m_show() is called with the module_mutex held. It accesses the module struct data and attempts to write out module data. It is in this code path that the above BUG_ON() warning is encountered, specifically m_show() calls static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); ... The other thread, CPU 1, in unloading the module calls the syscall delete_module() defined in kernel/module.c. The module_mutex is acquired for a short time, and then released. free_module() is called without the module_mutex. free_module() then sets mod->state = MODULE_STATE_UNFORMED, also without the module_mutex. Some additional code is called and then the module_mutex is reacquired to remove the module from the modules list: /* Now we can delete it from the lists */ mutex_lock(&module_mutex); stop_machine(__unlink_module, mod, NULL); mutex_unlock(&module_mutex); This is the sequence of events that leads to the panic. CPU 1 is removing dummy_module via delete_module(). It acquires the module_mutex, and then releases it. CPU 1 has NOT set dummy_module->state to MODULE_STATE_UNFORMED yet. CPU 0, which is reading the /proc/modules, acquires the module_mutex and acquires a pointer to the dummy_module which is still in the modules list. CPU 0 calls m_show for dummy_module. The check in m_show() for MODULE_STATE_UNFORMED passed for dummy_module even though it is being torn down. Meanwhile CPU 1, which has been continuing to remove dummy_module without holding the module_mutex, now calls free_module() and sets dummy_module->state to MODULE_STATE_UNFORMED. CPU 0 now calls module_flags() with dummy_module and ... static char *module_flags(struct module *mod, char *buf) { int bx = 0; BUG_ON(mod->state == MODULE_STATE_UNFORMED); and BOOM. Acquire and release the module_mutex lock around the setting of MODULE_STATE_UNFORMED in the teardown path, which should resolve the problem. Testing: In the unpatched kernel I can panic the system within 1 minute by doing while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done and while (true) do cat /proc/modules; done in separate terminals. In the patched kernel I was able to run just over one hour without seeing any issues. I also verified the output of panic via sysrq-c and the output of /proc/modules looks correct for all three states for the dummy_module. dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-) dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE) dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+) Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ce7514526742c0898b837d4395f515b79dfb5a12 upstream. It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG(). This problem is hard to reproduce making this patch hard to verify, but this fix will prevent the race. I have not been able to reproduce the problem, but here is a crash dump from a 2.6.32 kernel. On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE: crash> struct ata_port.hsm_task_state ffff881c1121c000 hsm_task_state = 0 Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(), which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value. PID: 11053 TASK: ffff8816e846cae0 CPU: 0 COMMAND: "sshd" #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510 linux4kix#3 [ffff88008ba03ac0] die at ffffffff81010e0b linux4kix#4 [ffff88008ba03af0] do_trap at ffffffff8152ad74 linux4kix#5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95 linux4kix#6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b [exception RIP: ata_sff_hsm_move+317] RIP: ffffffff813a77ad RSP: ffff88008ba03ca0 RFLAGS: 00010097 RAX: 0000000000000000 RBX: ffff881c1121dc60 RCX: 0000000000000000 RDX: ffff881c1121dd10 RSI: ffff881c1121dc60 RDI: ffff881c1121c000 RBP: ffff88008ba03d00 R8: 0000000000000000 R9: 000000000000002e R10: 000000000001003f R11: 000000000000009b R12: ffff881c1121c000 R13: 0000000000000000 R14: 0000000000000050 R15: ffff881c1121dd78 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 linux4kix#7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd linux4kix#8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e linux4kix#9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0

wolfgar added 2 commits April 27, 2014 15:42

Merge all CEC driver changes to 3.10

74fc2e8

This commit pushes all changes I did in the 3.0.35 kernel to improve/fix its behavior with libcec port for imx6 It also fixes CEC clock handling in case of FB mode change event and of HDMI cable disconnection

Fix a bug that could result in CEC interrupts to be improperly muted

76796e3

in case the CEC_STAT register was 0, the worker was not invoked and as a consequence the interrupts were not unmuted Also try to play better with the interrupt sharing with hmdi_video

linux4kix added a commit that referenced this pull request May 4, 2014

Merge pull request #7 from wolfgar/linux-linaro-lsk-mx6

a4ed700

CEC driver compmatible with imx6 libcec

linux4kix merged commit a4ed700 into linux4kix:linux-linaro-lsk-mx6 May 4, 2014

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

CEC driver compmatible with imx6 libcec #7

CEC driver compmatible with imx6 libcec #7

Uh oh!

wolfgar commented Apr 29, 2014

Uh oh!

Uh oh!

CEC driver compmatible with imx6 libcec #7

CEC driver compmatible with imx6 libcec #7

Uh oh!

Conversation

wolfgar commented Apr 29, 2014

Uh oh!

Uh oh!