Update regcache-maple.c #1

namiltd · 2024-07-25T21:45:22Z

Initialize variables

…mode in i.MX 8QM Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement that both source and destination addresses need pass through the IOMMU. Typically, peripheral FIFO addresses bypass the IOMMU, necessitating only one of the source or destination to go through it. Set "is_remote" to true to ensure both source and destination addresses pass through the IOMMU. iMX8 Spec define "Local" and "Remote" bus as below. Local bus: bypass IOMMU to directly access other peripheral register, such as FIFO. Remote bus: go through IOMMU to access system memory. The test fail log as follow: [ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0) [ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0) Fixes: 72f5801 ("dmaengine: fsl-edma: integrate v3 support") Signed-off-by: Joy Zou <joy.zou@nxp.com> Cc: stable@vger.kernel.org Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240510030959.703663-1-joy.zou@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>

Fix warning at drivers/pci/msi/msi.h:121. Recently, I added a PCI to PCIe bridge adaptor and a PCIe NVME card to my rp3440. Then, I noticed this warning at boot: WARNING: CPU: 0 PID: 10 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x68/0x90 CPU: 0 PID: 10 Comm: kworker/u32:0 Not tainted 6.9.7-parisc64 #1 Debian 6.9.7-1 Hardware name: 9000/800/rp3440 Workqueue: async async_run_entry_fn We need to select PCI_MSI_ARCH_FALLBACKS when PCI_MSI is selected. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Helge Deller <deller@gmx.de>

The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] <TASK> [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] </TASK> [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr Cc: stable@kernel.org Fixes: 67fa83f ("net/tcp: Add static_key for TCP-AO") Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Signed-off-by: NipaLocal <nipa@local>

skbuff_fclone_cache was created without defining a usercopy region, [1] unlike skbuff_head_cache which properly whitelists the cb[] field. [2] This causes a usercopy BUG() when CONFIG_HARDENED_USERCOPY is enabled and the kernel attempts to copy sk_buff.cb data to userspace via sock_recv_errqueue() -> put_cmsg(). The crash occurs when: 1. TCP allocates an skb using alloc_skb_fclone() (from skbuff_fclone_cache) [1] 2. The skb is cloned via skb_clone() using the pre-allocated fclone [3] 3. The cloned skb is queued to sk_error_queue for timestamp reporting 4. Userspace reads the error queue via recvmsg(MSG_ERRQUEUE) 5. sock_recv_errqueue() calls put_cmsg() to copy serr->ee from skb->cb [4] 6. __check_heap_object() fails because skbuff_fclone_cache has no usercopy whitelist [5] When cloned skbs allocated from skbuff_fclone_cache are used in the socket error queue, accessing the sock_exterr_skb structure in skb->cb via put_cmsg() triggers a usercopy hardening violation: [ 5.379589] usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_fclone_cache' (offset 296, size 16)! [ 5.382796] kernel BUG at mm/usercopy.c:102! [ 5.383923] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 5.384903] CPU: 1 UID: 0 PID: 138 Comm: poc_put_cmsg Not tainted 6.12.57 torvalds#7 [ 5.384903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 5.384903] RIP: 0010:usercopy_abort+0x6c/0x80 [ 5.384903] Code: 1a 86 51 48 c7 c2 40 15 1a 86 41 52 48 c7 c7 c0 15 1a 86 48 0f 45 d6 48 c7 c6 80 15 1a 86 48 89 c1 49 0f 45 f3 e8 84 27 88 ff <0f> 0b 490 [ 5.384903] RSP: 0018:ffffc900006f77a8 EFLAGS: 00010246 [ 5.384903] RAX: 000000000000006f RBX: ffff88800f0ad2a8 RCX: 1ffffffff0f72e74 [ 5.384903] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff87b973a0 [ 5.384903] RBP: 0000000000000010 R08: 0000000000000000 R09: fffffbfff0f72e74 [ 5.384903] R10: 0000000000000003 R11: 79706f6372657375 R12: 0000000000000001 [ 5.384903] R13: ffff88800f0ad2b8 R14: ffffea00003c2b40 R15: ffffea00003c2b00 [ 5.384903] FS: 0000000011bc4380(0000) GS:ffff8880bf100000(0000) knlGS:0000000000000000 [ 5.384903] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.384903] CR2: 000056aa3b8e5fe4 CR3: 000000000ea26004 CR4: 0000000000770ef0 [ 5.384903] PKRU: 55555554 [ 5.384903] Call Trace: [ 5.384903] <TASK> [ 5.384903] __check_heap_object+0x9a/0xd0 [ 5.384903] __check_object_size+0x46c/0x690 [ 5.384903] put_cmsg+0x129/0x5e0 [ 5.384903] sock_recv_errqueue+0x22f/0x380 [ 5.384903] tls_sw_recvmsg+0x7ed/0x1960 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? schedule+0x6d/0x270 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 [ 5.384903] ? mutex_unlock+0x81/0xd0 [ 5.384903] ? __pfx_mutex_unlock+0x10/0x10 [ 5.384903] ? __pfx_tls_sw_recvmsg+0x10/0x10 [ 5.384903] ? _raw_spin_lock_irqsave+0x8f/0xf0 [ 5.384903] ? _raw_read_unlock_irqrestore+0x20/0x40 [ 5.384903] ? srso_alias_return_thunk+0x5/0xfbef5 The crash offset 296 corresponds to skb2->cb within skbuff_fclones: - sizeof(struct sk_buff) = 232 - offsetof(struct sk_buff, cb) = 40 - offset of skb2.cb in fclones = 232 + 40 = 272 - crash offset 296 = 272 + 24 (inside sock_exterr_skb.ee) This patch uses a local stack variable as a bounce buffer to avoid the hardened usercopy check failure. [1] https://elixir.bootlin.com/linux/v6.12.62/source/net/ipv4/tcp.c#L885 [2] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5104 [3] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5566 [4] https://elixir.bootlin.com/linux/v6.12.62/source/net/core/skbuff.c#L5491 [5] https://elixir.bootlin.com/linux/v6.12.62/source/mm/slub.c#L5719 Fixes: 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") Reported-by: Xiang Mei <xmei5@asu.edu> Signed-off-by: Weiming Shi <bestswngs@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: NipaLocal <nipa@local>

In e1000_tbi_should_accept() we read the last byte of the frame via 'data[length - 1]' to evaluate the TBI workaround. If the descriptor- reported length is zero or larger than the actual RX buffer size, this read goes out of bounds and can hit unrelated slab objects. The issue is observed from the NAPI receive path (e1000_clean_rx_irq): ================================================================== BUG: KASAN: slab-out-of-bounds in e1000_tbi_should_accept+0x610/0x790 Read of size 1 at addr ffff888014114e54 by task sshd/363 CPU: 0 PID: 363 Comm: sshd Not tainted 5.18.0-rc1 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x5a/0x74 print_address_description+0x7b/0x440 print_report+0x101/0x200 kasan_report+0xc1/0xf0 e1000_tbi_should_accept+0x610/0x790 e1000_clean_rx_irq+0xa8c/0x1110 e1000_clean+0xde2/0x3c10 __napi_poll+0x98/0x380 net_rx_action+0x491/0xa20 __do_softirq+0x2c9/0x61d do_softirq+0xd1/0x120 </IRQ> <TASK> __local_bh_enable_ip+0xfe/0x130 ip_finish_output2+0x7d5/0xb00 __ip_queue_xmit+0xe24/0x1ab0 __tcp_transmit_skb+0x1bcb/0x3340 tcp_write_xmit+0x175d/0x6bd0 __tcp_push_pending_frames+0x7b/0x280 tcp_sendmsg_locked+0x2e4f/0x32d0 tcp_sendmsg+0x24/0x40 sock_write_iter+0x322/0x430 vfs_write+0x56c/0xa60 ksys_write+0xd1/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f511b476b10 Code: 73 01 c3 48 8b 0d 88 d3 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d f9 2b 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 8e 9b 01 00 48 89 04 24 RSP: 002b:00007ffc9211d4e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000004024 RCX: 00007f511b476b10 RDX: 0000000000004024 RSI: 0000559a9385962c RDI: 0000000000000003 RBP: 0000559a9383a400 R08: fffffffffffffff0 R09: 0000000000004f00 R10: 0000000000000070 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc9211d57f R14: 0000559a9347bde7 R15: 0000000000000003 </TASK> Allocated by task 1: __kasan_krealloc+0x131/0x1c0 krealloc+0x90/0xc0 add_sysfs_param+0xcb/0x8a0 kernel_add_sysfs_param+0x81/0xd4 param_sysfs_builtin+0x138/0x1a6 param_sysfs_init+0x57/0x5b do_one_initcall+0x104/0x250 do_initcall_level+0x102/0x132 do_initcalls+0x46/0x74 kernel_init_freeable+0x28f/0x393 kernel_init+0x14/0x1a0 ret_from_fork+0x22/0x30 The buggy address belongs to the object at ffff888014114000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1620 bytes to the right of 2048-byte region [ffff888014114000, ffff888014114800] The buggy address belongs to the physical page: page:ffffea0000504400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x14110 head:ffffea0000504400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head|node=0|zone=1) raw: 0100000000010200 0000000000000000 dead000000000001 ffff888013442000 raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected ================================================================== This happens because the TBI check unconditionally dereferences the last byte without validating the reported length first: u8 last_byte = *(data + length - 1); Fix by rejecting the frame early if the length is zero, or if it exceeds adapter->rx_buffer_len. This preserves the TBI workaround semantics for valid frames and prevents touching memory beyond the RX buffer. Fixes: 2037110 ("e1000: move tbi workaround code into helper function") Cc: stable@vger.kernel.org Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: NipaLocal <nipa@local>

When mana_serv_reset() encounters -ETIMEDOUT or -EPROTO from mana_gd_resume(), it performs a PCI rescan via mana_serv_rescan(). mana_serv_rescan() calls pci_stop_and_remove_bus_device(), which can invoke the driver's remove path and free the gdma_context associated with the device. After returning, mana_serv_reset() currently jumps to the out label and attempts to clear gc->in_service, dereferencing a freed gdma_context. The issue was observed with the following call logs: [ 698.942636] BUG: unable to handle page fault for address: ff6c2b638088508d [ 698.943121] #PF: supervisor write access in kernel mode [ 698.943423] #PF: error_code(0x0002) - not-present page [S[ 698.943793] Pat Dec 6 07:GD5 100000067 P4D 1002f7067 PUD 1002f8067 PMD 101bef067 PTE 0 0:56 2025] hv_[n e 698.944283] Oops: Oops: 0002 [#1] SMP NOPTI tvsc f8615163-00[ 698.944611] CPU: 28 UID: 0 PID: 249 Comm: kworker/28:1 ... [Sat Dec 6 07:50:56 2025] R10: [ 699.121594] mana 7870:00:00.0 enP30832s1: Configured vPort 0 PD 18 DB 16 000000000000001b R11: 0000000000000000 R12: ff44cf3f40270000 [Sat Dec 6 07:50:56 2025] R13: 0000000000000001 R14: ff44cf3f402700c8 R15: ff44cf3f4021b405 [Sat Dec 6 07:50:56 2025] FS: 0000000000000000(0000) GS:ff44cf7e9fcf9000(0000) knlGS:0000000000000000 [Sat Dec 6 07:50:56 2025] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [Sat Dec 6 07:50:56 2025] CR2: ff6c2b638088508d CR3: 000000011fe43001 CR4: 0000000000b73ef0 [Sat Dec 6 07:50:56 2025] Call Trace: [Sat Dec 6 07:50:56 2025] <TASK> [Sat Dec 6 07:50:56 2025] mana_serv_func+0x24/0x50 [mana] [Sat Dec 6 07:50:56 2025] process_one_work+0x190/0x350 [Sat Dec 6 07:50:56 2025] worker_thread+0x2b7/0x3d0 [Sat Dec 6 07:50:56 2025] kthread+0xf3/0x200 [Sat Dec 6 07:50:56 2025] ? __pfx_worker_thread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ret_from_fork+0x21a/0x250 [Sat Dec 6 07:50:56 2025] ? __pfx_kthread+0x10/0x10 [Sat Dec 6 07:50:56 2025] ret_from_fork_asm+0x1a/0x30 [Sat Dec 6 07:50:56 2025] </TASK> Fix this by returning immediately after mana_serv_rescan() to avoid accessing GC state that may no longer be valid. Fixes: 9bf6603 ("net: mana: Handle hardware recovery events when probing the device") Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Long Li <longli@microsoft.com> Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com> Signed-off-by: NipaLocal <nipa@local>

syzbot reported a crash [1] in dql_completed() after recent usbnet BQL adoption. The reason for the crash is that netdev_reset_queue() is called too soon. It should be called after cancel_work_sync(&dev->bh_work) to make sure no more TX completion can happen. [1] kernel BUG at lib/dynamic_queue_limits.c:99 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 5197 Comm: udevd Tainted: G L syzkaller #0 PREEMPT(full) Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 RIP: 0010:dql_completed+0xbe1/0xbf0 lib/dynamic_queue_limits.c:99 Call Trace: <IRQ> netdev_tx_completed_queue include/linux/netdevice.h:3864 [inline] netdev_completed_queue include/linux/netdevice.h:3894 [inline] usbnet_bh+0x793/0x1020 drivers/net/usb/usbnet.c:1601 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 bh_worker+0x2b1/0x600 kernel/workqueue.c:3611 tasklet_action+0xc/0x70 kernel/softirq.c:952 handle_softirqs+0x27d/0x850 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] invoke_softirq kernel/softirq.c:496 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:723 irq_exit_rcu+0x9/0x30 kernel/softirq.c:739 Fixes: 7ff14c5 ("usbnet: Add support for Byte Queue Limits (BQL)") Reported-by: syzbot+5b55e49f8bbd84631a9c@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6945644f.a70a0220.207337.0113.GAE@google.com/T/#u Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Simon Schippers <simon.schippers@tu-dortmund.de> Signed-off-by: NipaLocal <nipa@local>

… to macb_open() In the non-RT kernel, local_bh_disable() merely disables preemption, whereas it maps to an actual spin lock in the RT kernel. Consequently, when attempting to refill RX buffers via netdev_alloc_skb() in macb_mac_link_up(), a deadlock scenario arises as follows: WARNING: possible circular locking dependency detected 6.18.0-08691-g2061f18ad76e torvalds#39 Not tainted ------------------------------------------------------ kworker/0:0/8 is trying to acquire lock: ffff00080369bbe0 (&bp->lock){+.+.}-{3:3}, at: macb_start_xmit+0x808/0xb7c but task is already holding lock: ffff000803698e58 (&queue->tx_ptr_lock){+...}-{3:3}, at: macb_start_xmit +0x148/0xb7c which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (&queue->tx_ptr_lock){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x148/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #2 (_xmit_ETHER#2){+...}-{3:3}: rt_spin_lock+0x50/0x1f0 sch_direct_xmit+0x11c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #1 ((softirq_ctrl.lock)){+.+.}-{3:3}: lock_release+0x250/0x348 __local_bh_enable_ip+0x7c/0x240 __netdev_alloc_skb+0x1b4/0x1d8 gem_rx_refill+0xdc/0x240 gem_init_rings+0xb4/0x108 macb_mac_link_up+0x9c/0x2b4 phylink_resolve+0x170/0x614 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 -> #0 (&bp->lock){+.+.}-{3:3}: __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: &bp->lock --> _xmit_ETHER#2 --> &queue->tx_ptr_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&queue->tx_ptr_lock); lock(_xmit_ETHER#2); lock(&queue->tx_ptr_lock); lock(&bp->lock); *** DEADLOCK *** Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0xa0/0xf0 dump_stack+0x18/0x24 print_circular_bug+0x28c/0x370 check_noncircular+0x198/0x1ac __lock_acquire+0x15a8/0x2084 lock_acquire+0x1cc/0x350 rt_spin_lock+0x50/0x1f0 macb_start_xmit+0x808/0xb7c dev_hard_start_xmit+0x94/0x284 sch_direct_xmit+0x8c/0x37c __dev_queue_xmit+0x708/0x1120 neigh_resolve_output+0x148/0x28c ip6_finish_output2+0x2c0/0xb2c __ip6_finish_output+0x114/0x308 ip6_output+0xc4/0x4a4 mld_sendpack+0x220/0x68c mld_ifc_work+0x2a8/0x4f4 process_one_work+0x20c/0x5f8 worker_thread+0x1b0/0x35c kthread+0x144/0x200 ret_from_fork+0x10/0x20 Notably, invoking the mog_init_rings() callback upon link establishment is unnecessary. Instead, we can exclusively call mog_init_rings() within the ndo_open() callback. This adjustment resolves the deadlock issue. Furthermore, since MACB_CAPS_MACB_IS_EMAC cases do not use mog_init_rings() when opening the network interface via at91ether_open(), moving mog_init_rings() to macb_open() also eliminates the MACB_CAPS_MACB_IS_EMAC check. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Cc: stable@vger.kernel.org Suggested-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Signed-off-by: NipaLocal <nipa@local>