Status

SeqVM is considered ALPHA software and is not safe to use in production. The framework is under active development and may change significantly over the coming months as its modules are optimized and audited.

Features

Shared Sequencer

The SeqVM is built from the ground up with the shared sequencer built directly into the chain enabling decentralization from the start. This enable users to easily send messages from rollups like NodeKit chain to the shared sequencer. The contents of SequencerMSG is just ChainId|Data|FromAddress where the data is the transaction data from the rollup translated into a byte[].

Arbitrary Token Minting

The SeqVM also has the ability to create, mint, and transfer user-generated tokens with ease. When creating an asset, the owner is given "admin control" of the asset functions and can later mint more of an asset, update its metadata (during a reveal for example), or transfer/revoke ownership (if rotating their key or turning over to their community).

Assets are a native feature of the SeqVM and the storage engine is optimized specifically to support their efficient usage (each balance entry requires only 72 bytes of state = assetID|publicKey=>balance(uint64)). This storage format makes it possible to parallelize the execution of any transfers that don't touch the same accounts. This parallelism will take effect as soon as it is re-added upstream by the hypersdk (no action required in the SeqVM).

Avalanche Warp Support

We plan to take advantage of the Avalanche Warp Messaging (AWM) support provided by the hypersdk to enable any SeqVM to receive messages from our NodeKit Hub subnet without relying on a trusted relayer or bridge (just the validators of the SeqVM and NodeKit Hub sending the message). This feature is still in-progress and we will be sharing more details in the upcoming months.

Demos

The first step to running these demos is to launch your own SeqVM Subnet. You can do so by running the following command from this location (may take a few minutes):

./scripts/run.sh;

By default, this allocates all funds on the network to token1rvzhmceq997zntgvravfagsks6w0ryud3rylh4cdvayry0dl97nsjzf3yp. The private key for this address is 0x323b1d8f4eed5f0da9da93071b034f2dce9d2d22692c172f3cb252a64ddfafd01b057de320297c29ad0c1f589ea216869cf1938d88c9fbd70d6748323dbf2fa7. For convenience, this key has is also stored at demo.pk.

If you don't need 2 Subnets for your testing, you can run MODE="run-single" ./scripts/run.sh.

To make it easy to interact with the SeqVM, we implemented the token-cli. Next, you'll need to build this. You can use the following command from this location to do so:

./scripts/build.sh

This command will put the compiled CLI in ./build/token-cli.

Lastly, you'll need to add the chains you created and the default key to the token-cli. You can use the following commands from this location to do so:

./build/token-cli key import demo.pk
./build/token-cli chain import-anr

chain import-anr connects to the Avalanche Network Runner server running in the background and pulls the URIs of all nodes tracking each chain you created.

Mint and Trade

Step 1: Create Your Asset

First up, let's create our own asset. You can do so by running the following command from this location:

./build/token-cli action create-asset

When you are done, the output should look something like this:

database: .token-cli
address: token1rvzhmceq997zntgvravfagsks6w0ryud3rylh4cdvayry0dl97nsjzf3yp
chainID: Em2pZtHr7rDCzii43an2bBi1M2mTFyLN33QP1Xfjy7BcWtaH9
metadata (can be changed later): MarioCoin
continue (y/n): y
✅ txID: 27grFs9vE2YP9kwLM5hQJGLDvqEY9ii71zzdoRHNGC4Appavug

txID is the assetID of your new asset.

The "loaded address" here is the address of the default private key (demo.pk). We use this key to authenticate all interactions with the SeqVM.

Step 2: Mint Your Asset

After we've created our own asset, we can now mint some of it. You can do so by running the following command from this location:

./build/token-cli action mint-asset

When you are done, the output should look something like this (usually easiest just to mint to yourself).

database: .token-cli
address: token1rvzhmceq997zntgvravfagsks6w0ryud3rylh4cdvayry0dl97nsjzf3yp
chainID: Em2pZtHr7rDCzii43an2bBi1M2mTFyLN33QP1Xfjy7BcWtaH9
assetID: 27grFs9vE2YP9kwLM5hQJGLDvqEY9ii71zzdoRHNGC4Appavug
metadata: MarioCoin supply: 0
recipient: token1rvzhmceq997zntgvravfagsks6w0ryud3rylh4cdvayry0dl97nsjzf3yp
amount: 10000
continue (y/n): y
✅ txID: X1E5CVFgFFgniFyWcj5wweGg66TyzjK2bMWWTzFwJcwFYkF72

Step 3: View Your Balance

Now, let's check that the mint worked right by checking our balance. You can do so by running the following command from this location:

./build/token-cli key balance

When you are done, the output should look something like this:

database: .token-cli
address: token1rvzhmceq997zntgvravfagsks6w0ryud3rylh4cdvayry0dl97nsjzf3yp
chainID: Em2pZtHr7rDCzii43an2bBi1M2mTFyLN33QP1Xfjy7BcWtaH9
assetID (use TKN for native token): 27grFs9vE2YP9kwLM5hQJGLDvqEY9ii71zzdoRHNGC4Appavug
metadata: MarioCoin supply: 10000 warp: false
balance: 10000 27grFs9vE2YP9kwLM5hQJGLDvqEY9ii71zzdoRHNGC4Appavug

Bonus: Watch Activity in Real-Time

To provide a better sense of what is actually happening on-chain, the token-cli comes bundled with a simple explorer that logs all blocks/txs that occur on-chain. You can run this utility by running the following command from this location:

./build/token-cli chain watch

If you run it correctly, you'll see the following input (will run until the network shuts down or you exit):

database: .token-cli
available chains: 2 excluded: []
0) chainID: Em2pZtHr7rDCzii43an2bBi1M2mTFyLN33QP1Xfjy7BcWtaH9
1) chainID: cKVefMmNPSKmLoshR15Fzxmx52Y5yUSPqWiJsNFUg1WgNQVMX
select chainID: 0
watching for new blocks on Em2pZtHr7rDCzii43an2bBi1M2mTFyLN33QP1Xfjy7BcWtaH9 👀
height:13 txs:1 units:488 root:2po1n8rqdpNuwpMGndqC2hjt6Xa3cUDsjEpm7D6u9kJRFEPmdL avg TPS:0.026082
✅ KwHcsy3TXcnDyoMNmpMYC4EUvXPDPCoTK8YaEigG7nWwwdi1n actor: token1rvzhmceq997zntgvravfagsks6w0ryud3rylh4cdvayry0dl97nsjzf3yp units: 496 summary (*actions.SequencerMsg): [data: ]

Running a Load Test

Before running this demo, make sure to stop the network you started using killall avalanche-network-runner.

The SeqVM load test will provision 5 SeqVMs and process 500k transfers on each between 10k different accounts.

./scripts/tests.load.sh

This test SOLELY tests the speed of the SeqVM. It does not include any network delay or consensus overhead. It just tests the underlying performance of the hypersdk and the storage engine used (in this case MerkleDB on top of Pebble).

Measuring Disk Speed

This test is extremely sensitive to disk performance. When reporting any TPS results, please include the output of:

./scripts/tests.disk.sh

Run this test RARELY. It writes/reads many GBs from your disk and can fry an SSD if you run it too often. We run this in CI to standardize the result of all load tests.

Zipkin Tracing

To trace the performance of SeqVM during load testing, we use OpenTelemetry + Zipkin.

To get started, startup the Zipkin backend and ElasticSearch database (inside hypersdk/trace):

docker-compose -f trace/zipkin.yml up

Once Zipkin is running, you can visit it at http://localhost:9411.

Next, startup the load tester (it will automatically send traces to Zipkin):

TRACE=true ./scripts/tests.load.sh

When you are done, you can tear everything down by running the following command:

docker-compose -f trace/zipkin.yml down

Deploying to a Devnet

In the world of Avalanche, we refer to short-lived, test Subnets as Devnets.

To programaticaly deploy SeqVM to a distributed cluster of nodes running on your own custom network or on Fuji, check out this doc.

Future Work

If you want to take the lead on any of these items, please start a discussion or reach out on the NodeKit Discord.