From a168de35f5175da96481bec2a21bcab97cb04c87 Mon Sep 17 00:00:00 2001 From: Robert Haschke Date: Wed, 29 Nov 2023 11:39:34 +0100 Subject: [PATCH] Update OMPL configs from MSA --- config/ompl_planning.yaml | 51 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 47 insertions(+), 4 deletions(-) diff --git a/config/ompl_planning.yaml b/config/ompl_planning.yaml index 32b496e..7c9eecb 100644 --- a/config/ompl_planning.yaml +++ b/config/ompl_planning.yaml @@ -51,8 +51,8 @@ planner_configs: temp_change_factor: 2.0 # how much to increase or decrease temp. default: 2.0 min_temperature: 10e-10 # lower limit of temp change. default: 10e-10 init_temperature: 10e-6 # initial temperature. default: 10e-6 - frountier_threshold: 0.0 # dist new state to nearest neighbor to disqualify as frontier. default: 0.0 set in setup() - frountierNodeRatio: 0.1 # 1/10, or 1 nonfrontier for every 10 frontier. default: 0.1 + frontier_threshold: 0.0 # dist new state to nearest neighbor to disqualify as frontier. default: 0.0 set in setup() + frontier_node_ratio: 0.1 # 1/10, or 1 nonfrontier for every 10 frontier. default: 0.1 k_constant: 0.0 # value used to normalize expresssion. default: 0.0 set in setup() PRM: type: geometric::PRM @@ -95,8 +95,8 @@ planner_configs: range: 0.0 # Max motion added to tree. ==> maxDistance_ default: 0.0, if 0.0, set on setup() temp_change_factor: 0.1 # how much to increase or decrease temp. default: 0.1 init_temperature: 100 # initial temperature. default: 100 - frountier_threshold: 0.0 # dist new state to nearest neighbor to disqualify as frontier. default: 0.0 set in setup() - frountier_node_ratio: 0.1 # 1/10, or 1 nonfrontier for every 10 frontier. default: 0.1 + frontier_threshold: 0.0 # dist new state to nearest neighbor to disqualify as frontier. default: 0.0 set in setup() + frontier_node_ratio: 0.1 # 1/10, or 1 nonfrontier for every 10 frontier. default: 0.1 cost_threshold: 1e300 # the cost threshold. Any motion cost that is not better will not be expanded. default: inf LBTRRT: type: geometric::LBTRRT @@ -127,6 +127,43 @@ planner_configs: sparse_delta_fraction: 0.25 # delta fraction for connection distance. This value represents the visibility range of sparse samples. default: 0.25 dense_delta_fraction: 0.001 # delta fraction for interface detection. default: 0.001 max_failures: 5000 # maximum consecutive failure limit. default: 5000 + AITstar: + type: geometric::AITstar + use_k_nearest: 1 # whether to use a k-nearest RGG connection model (1) or an r-disc model (0). Default: 1 + rewire_factor: 1.001 # rewire factor of the RGG. Valid values: [1.0:0.01:3.0]. Default: 1.001 + samples_per_batch: 100 # batch size. Valid values: [1:1:1000]. Default: 100 + use_graph_pruning: 1 # enable graph pruning (1) or not (0). Default: 1 + find_approximate_solutions: 0 # track approximate solutions (1) or not (0). Default: 0 + set_max_num_goals: 1 # maximum number of goals sampled from sampleable goal regions. Valid values: [1:1:1000]. Default: 1 + ABITstar: + type: geometric::ABITstar + use_k_nearest: 1 # whether to use a k-nearest RGG connection model (1) or an r-disc model (0). Default: 1 + rewire_factor: 1.001 # rewire factor of the RGG. Valid values: [1.0:0.01:3.0]. Default: 1.001 + samples_per_batch: 100 # batch size. Valid values: [1:1:1000]. Default: 100 + use_graph_pruning: 1 # enable graph pruning (1) or not (0). Default: 1 + prune_threshold_as_fractional_cost_change: 0.1 # fractional change in the solution cost AND problem measure necessary for pruning to occur. Default: 0.1 + delay_rewiring_to_first_solution: 0 # delay (1) or not (0) rewiring until a solution is found. Default: 0 + use_just_in_time_sampling: 0 # delay the generation of samples until they are * necessary. Only works with r-disc connection and path length minimization. Default: 0 + drop_unconnected_samples_on_prune: 0 # drop unconnected samples when pruning, regardless of their heuristic value. Default: 0 + stop_on_each_solution_improvement: 0 # stop the planner each time a solution improvement is found. Useful for debugging. Default: 0 + use_strict_queue_ordering: 0 # sort edges in the queue at the end of the batch (0) or after each rewiring (1). Default: 0 + find_approximate_solutions: 0 # track approximate solutions (1) or not (0). Default: 0 + initial_inflation_factor: 1000000 # inflation factor for the initial search. Valid values: [1.0:0.01:1000000.0]. Default: 1000000 + inflation_scaling_parameter: 10 # scaling parameter for the inflation factor update policy. Valid values: [1.0:0.01:1000000.0]. Default: 0 + truncation_scaling_parameter: 5.0 # scaling parameter for the truncation factor update policy. Valid values: [1.0:0.01:1000000.0]. Default: 0 + BITstar: + type: geometric::BITstar + use_k_nearest: 1 # whether to use a k-nearest RGG connection model (1) or an r-disc model (0). Default: 1 + rewire_factor: 1.001 # rewire factor of the RGG. Valid values: [1.0:0.01:3.0]. Default: 1.001 + samples_per_batch: 100 # batch size. Valid values: [1:1:1000]. Default: 100 + use_graph_pruning: 1 # enable graph pruning (1) or not (0). Default: 1 + prune_threshold_as_fractional_cost_change: 0.1 # fractional change in the solution cost AND problem measure necessary for pruning to occur. Default: 0.1 + delay_rewiring_to_first_solution: 0 # delay (1) or not (0) rewiring until a solution is found. Default: 0 + use_just_in_time_sampling: 0 # delay the generation of samples until they are * necessary. Only works with r-disc connection and path length minimization. Default: 0 + drop_unconnected_samples_on_prune: 0 # drop unconnected samples when pruning, regardless of their heuristic value. Default: 0 + stop_on_each_solution_improvement: 0 # stop the planner each time a solution improvement is found. Useful for debugging. Default: 0 + use_strict_queue_ordering: 0 # sort edges in the queue at the end of the batch (0) or after each rewiring (1). Default: 0 + find_approximate_solutions: 0 # track approximate solutions (1) or not (0). Default: 0 $(arg arm_id)_arm: &arm_config planner_configs: - AnytimePathShortening @@ -153,6 +190,9 @@ $(arg arm_id)_arm: &arm_config - LazyPRMstar - SPARS - SPARStwo + - AITstar + - ABITstar + - BITstar projection_evaluator: joints($(arg arm_id)_joint1,$(arg arm_id)_joint2) longest_valid_segment_fraction: 0.005 $(arg arm_id)_manipulator: *arm_config @@ -182,3 +222,6 @@ $(arg arm_id)_hand: - LazyPRMstar - SPARS - SPARStwo + - AITstar + - ABITstar + - BITstar