[BUG] Bulging approximately from the 6th layer

[madcowkp]

Bulging approximately from the 6th layer

Steps to Reproduce

I made some upgrades to my Anycubic I3 Mega Pro:

1. Self-printed Anycubic i3 Mega X-Carriage [MK4]
2. Installed BL Touch
3. Changed all drivers to TMC2208
4. Followed all instructions exactly

I tested the TMCs in the following configurations, but the result remained the same:

X	Y	Z	E0	E1
1V	1.2	1V	1V	1V
1.15V	1.3V	1.15V	1.15V	1.15V
1.13V	1.22V	1.15V	0.94V	1.15V

Expected behavior: Solid print results

Actual behavior: The auto-leveling works excellently, and the first layer is perfect. After about the sixth layer, a kind of bulge forms, running around the entire print object.

Additional Information

When I updated the printer, I completely disassembled it, cleaned it, re-oiled and greased it, and reassembled it. It seems to me that the Z-axis is not lifting cleanly, but this is just a suspicion. Does anyone have an idea where the problem might be? I am attaching some pictures of the poor print results.

[St-Aris]

Have you tried 'load fw defaults' and 'save eeprom' from the special menu?