Merge branch 'net-next-2025-07-02--03-00' into HEAD

Author: Your Name

Documentation/ABI/testing/sysfs-class-net-phydev

@@ -26,6 +26,16 @@ Description:
 		This ID is used to match the device with the appropriate
 		driver.
 
+What:		/sys/class/mdio_bus/<bus>/<device>/c45_phy_ids/mmd<n>_device_id
+Date:		June 2025
+KernelVersion:	6.17
+Contact:	netdev@vger.kernel.org
+Description:
+		This attribute contains the 32-bit PHY Identifier as reported
+		by the device during bus enumeration, encoded in hexadecimal.
+		These C45 IDs are used to match the device with the appropriate
+		driver. These files are invisible to the C22 device.
+
 What:		/sys/class/mdio_bus/<bus>/<device>/phy_interface
 Date:		February 2014
 KernelVersion:	3.15

Documentation/dev-tools/checkpatch.rst

@@ -495,6 +495,15 @@ Comments
 
     See: https://lore.kernel.org/lkml/20131006222342.GT19510@leaf/
 
+  **UNCOMMENTED_RGMII_MODE**
+    Historically, the RGMII PHY modes specified in Device Trees have been
+    used inconsistently, often referring to the usage of delays on the PHY
+    side rather than describing the board.
+
+    PHY modes "rgmii", "rgmii-rxid" and "rgmii-txid" modes require the clock
+    signal to be delayed on the PCB; this unusual configuration should be
+    described in a comment. If they are not (meaning that the delay is realized
+    internally in the MAC or PHY), "rgmii-id" is the correct PHY mode.
 
 Commit message
 --------------

Documentation/devicetree/bindings/dpll/dpll-device.yaml

@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Digital Phase-Locked Loop (DPLL) Device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Digital Phase-Locked Loop (DPLL) device is used for precise clock
+  synchronization in networking and telecom hardware. The device can
+  have one or more channels (DPLLs) and one or more physical input and
+  output pins. Each DPLL channel can either produce pulse-per-clock signal
+  or drive ethernet equipment clock. The type of each channel can be
+  indicated by dpll-types property.
+
+properties:
+  $nodename:
+    pattern: "^dpll(@.*)?$"
+
+  "#address-cells":
+    const: 0
+
+  "#size-cells":
+    const: 0
+
+  dpll-types:
+    description: List of DPLL channel types, one per DPLL instance.
+    $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+    items:
+      enum: [pps, eec]
+
+  input-pins:
+    type: object
+    description: DPLL input pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9a-f]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+  output-pins:
+    type: object
+    description: DPLL output pins
+    unevaluatedProperties: false
+
+    properties:
+      "#address-cells":
+        const: 1
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^pin@[0-9]+$":
+        $ref: /schemas/dpll/dpll-pin.yaml
+        unevaluatedProperties: false
+
+    required:
+      - "#address-cells"
+      - "#size-cells"
+
+additionalProperties: true

Documentation/devicetree/bindings/dpll/dpll-pin.yaml

@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/dpll-pin.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DPLL Pin
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description: |
+  The DPLL pin is either a physical input or output pin that is provided
+  by a DPLL( Digital Phase-Locked Loop) device. The pin is identified by
+  its physical order number that is stored in reg property and can have
+  an additional set of properties like supported (allowed) frequencies,
+  label, type and may support embedded sync.
+
+  Note that the pin in this context has nothing to do with pinctrl.
+
+properties:
+  reg:
+    description: Hardware index of the DPLL pin.
+    maxItems: 1
+
+  connection-type:
+    description: Connection type of the pin
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ext, gnss, int, mux, synce]
+
+  esync-control:
+    description: Indicates whether the pin supports embedded sync functionality.
+    type: boolean
+
+  label:
+    description: String exposed as the pin board label
+    $ref: /schemas/types.yaml#/definitions/string
+
+  supported-frequencies-hz:
+    description: List of supported frequencies for this pin, expressed in Hz.
+
+required:
+  - reg
+
+additionalProperties: false

Documentation/devicetree/bindings/dpll/microchip,zl30731.yaml

@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dpll/microchip,zl30731.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Azurite DPLL device
+
+maintainers:
+  - Ivan Vecera <ivecera@redhat.com>
+
+description:
+  Microchip Azurite DPLL (ZL3073x) is a family of DPLL devices that
+  provides up to 5 independent DPLL channels, up to 10 differential or
+  single-ended inputs and 10 differential or 20 single-ended outputs.
+  These devices support both I2C and SPI interfaces.
+
+properties:
+  compatible:
+    enum:
+      - microchip,zl30731
+      - microchip,zl30732
+      - microchip,zl30733
+      - microchip,zl30734
+      - microchip,zl30735
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/dpll/dpll-device.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dpll@70 {
+        compatible = "microchip,zl30732";
+        reg = <0x70>;
+        dpll-types = "pps", "eec";
+
+        input-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@0 { /* REF0P */
+            reg = <0>;
+            connection-type = "ext";
+            label = "Input 0";
+            supported-frequencies-hz = /bits/ 64 <1 1000>;
+          };
+        };
+
+        output-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@3 { /* OUT1N */
+            reg = <3>;
+            connection-type = "gnss";
+            esync-control;
+            label = "Output 1";
+            supported-frequencies-hz = /bits/ 64 <1 10000>;
+          };
+        };
+      };
+    };
+  - |
+    spi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      dpll@70 {
+        compatible = "microchip,zl30731";
+        reg = <0x70>;
+        spi-max-frequency = <12500000>;
+
+        dpll-types = "pps";
+
+        input-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@0 { /* REF0P */
+            reg = <0>;
+            connection-type = "ext";
+            label = "Input 0";
+            supported-frequencies-hz = /bits/ 64 <1 1000>;
+          };
+        };
+
+        output-pins {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          pin@3 { /* OUT1N */
+            reg = <3>;
+            connection-type = "gnss";
+            esync-control;
+            label = "Output 1";
+            supported-frequencies-hz = /bits/ 64 <1 10000>;
+          };
+        };
+      };
+    };
+...

Documentation/devicetree/bindings/net/airoha,an7583-mdio.yaml

@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,an7583-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN7583 Dedicated MDIO Controller
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+description:
+  Airoha AN7583 SoC have 3 different MDIO Controller.
+
+  One comes from the intergated Switch based on MT7530.
+
+  The other 2 (that this schema describe) live under the SCU
+  register supporting both C22 and C45 PHYs.
+
+$ref: mdio.yaml#
+
+properties:
+  compatible:
+    const: airoha,an7583-mdio
+
+  reg:
+    enum: [0xc8, 0xcc]
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  clock-frequency:
+    default: 2500000
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - resets
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    system-controller {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        mdio-bus@c8 {
+            compatible = "airoha,an7583-mdio";
+            reg = <0xc8>;
+
+            clocks = <&scu>;
+            resets = <&scu>;
+        };
+    };

Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml

@@ -21,6 +21,7 @@ properties:
       - items:
           - enum:
               - allwinner,sun20i-d1-emac
+              - allwinner,sun50i-a100-emac
               - allwinner,sun50i-h6-emac
               - allwinner,sun50i-h616-emac0
               - allwinner,sun55i-a523-emac0

Documentation/devicetree/bindings/net/altr,gmii-to-sgmii-2.0.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2025 Altera Corporation
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/altr,gmii-to-sgmii-2.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera GMII to SGMII Converter
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@altera.com>
+
+description:
+  This binding describes the Altera GMII to SGMII converter.
+
+properties:
+  compatible:
+    const: altr,gmii-to-sgmii-2.0
+
+  reg:
+    items:
+      - description: Registers for the emac splitter IP
+      - description: Registers for the GMII to SGMII converter.
+      - description: Registers for TSE control.
+
+  reg-names:
+    items:
+      - const: hps_emac_interface_splitter_avalon_slave
+      - const: gmii_to_sgmii_adapter_avalon_slave
+      - const: eth_tse_control_port
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    phy@ff000240 {
+        compatible = "altr,gmii-to-sgmii-2.0";
+        reg = <0xff000240 0x00000008>,
+              <0xff000200 0x00000040>,
+              <0xff000250 0x00000008>;
+        reg-names = "hps_emac_interface_splitter_avalon_slave",
+                    "gmii_to_sgmii_adapter_avalon_slave",
+                    "eth_tse_control_port";
+    };