selftests/bpf: fix GCC11 compiler warnings in -O2 mode #5

kernel-patches-bot · 2022-02-15T17:06:28Z

Pull request for series with
subject: selftests/bpf: fix GCC11 compiler warnings in -O2 mode
version: 1
url: https://patchwork.kernel.org/project/netdevbpf/list/?series=613583

kernel-patches-bot · 2022-02-15T17:06:28Z

Master branch: edc21dc
series: https://patchwork.kernel.org/project/netdevbpf/list/?series=613583
version: 1

kernel-patches-bot · 2022-02-15T18:09:41Z

Master branch: d2b94f3
series: https://patchwork.kernel.org/project/netdevbpf/list/?series=613583
version: 1

kernel-patches-bot · 2022-02-15T18:14:13Z

At least one diff in series https://patchwork.kernel.org/project/netdevbpf/list/?series=613583 irrelevant now. Closing PR.

Emails to Roger Quadros TI account bounce with: 550 Invalid recipient <rogerq@ti.com> (#5.1.1) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Roger Quadros <rogerq@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220221100701.48593-1-krzysztof.kozlowski@canonical.com

Dust Li says: ==================== net/smc: some datapath performance optimizations This series tries to improve the performance of SMC in datapath. - patch #1, add sysctl interface to support tuning the behaviour of SMC in container environment. - patch #2/#3, add autocorking support which is very efficient for small messages without trade-off for latency. - patch #4, send directly on setting TCP_NODELAY, without wake up the TX worker, this make it consistent with clearing TCP_CORK. - patch #5, this correct the setting of RMB window update limit, so we don't send CDC messages to update peer's RMB window too frequently in some cases. - patch #6, implemented something like NAPI in SMC, decrease the number of hardirq when busy. - patch #7, this moves TX work doing in the BH to the user context when sock_lock is hold by user. With this patchset applied, we can get a good performance gain: - qperf tcp_bw test has shown a great improvement. Other benchmarks like 'netperf TCP_STREAM' or 'sockperf throughput' has similar result. - In my testing environment, running qperf tcp_bw and tcp_lat, SMC behaves better then TCP in most all message size. Here are some test results with the following testing command: client: smc_run taskset -c 1 qperf smc-server -oo msg_size:1:64K:*2 \ -t 30 -vu tcp_{bw|lat} server: smc_run taskset -c 1 qperf ==== Bandwidth ==== MsgSize Origin SMC TCP SMC with patches 1 0.578 MB/s 2.392 MB/s(313.57%) 2.561 MB/s(342.83%) 2 1.159 MB/s 4.780 MB/s(312.53%) 5.162 MB/s(345.46%) 4 2.283 MB/s 10.266 MB/s(349.77%) 10.122 MB/s(343.46%) 8 4.668 MB/s 19.040 MB/s(307.86%) 20.521 MB/s(339.59%) 16 9.147 MB/s 38.904 MB/s(325.31%) 40.823 MB/s(346.29%) 32 18.369 MB/s 79.587 MB/s(333.25%) 80.535 MB/s(338.42%) 64 36.562 MB/s 148.668 MB/s(306.61%) 158.170 MB/s(332.60%) 128 72.961 MB/s 274.913 MB/s(276.80%) 316.217 MB/s(333.41%) 256 144.705 MB/s 512.059 MB/s(253.86%) 626.019 MB/s(332.62%) 512 288.873 MB/s 884.977 MB/s(206.35%) 1221.596 MB/s(322.88%) 1024 574.180 MB/s 1337.736 MB/s(132.98%) 2203.156 MB/s(283.70%) 2048 1095.192 MB/s 1865.952 MB/s( 70.38%) 3036.448 MB/s(177.25%) 4096 2066.157 MB/s 2380.337 MB/s( 15.21%) 3834.271 MB/s( 85.58%) 8192 3717.198 MB/s 2733.073 MB/s(-26.47%) 4904.910 MB/s( 31.95%) 16384 4742.221 MB/s 2958.693 MB/s(-37.61%) 5220.272 MB/s( 10.08%) 32768 5349.550 MB/s 3061.285 MB/s(-42.77%) 5321.865 MB/s( -0.52%) 65536 5162.919 MB/s 3731.408 MB/s(-27.73%) 5245.021 MB/s( 1.59%) ==== Latency ==== MsgSize Origin SMC TCP SMC with patches 1 10.540 us 11.938 us( 13.26%) 10.356 us( -1.75%) 2 10.996 us 11.992 us( 9.06%) 10.073 us( -8.39%) 4 10.229 us 11.687 us( 14.25%) 9.996 us( -2.28%) 8 10.203 us 11.653 us( 14.21%) 10.063 us( -1.37%) 16 10.530 us 11.313 us( 7.44%) 10.013 us( -4.91%) 32 10.241 us 11.586 us( 13.13%) 10.081 us( -1.56%) 64 10.693 us 11.652 us( 8.97%) 9.986 us( -6.61%) 128 10.597 us 11.579 us( 9.27%) 10.262 us( -3.16%) 256 10.409 us 11.957 us( 14.87%) 10.148 us( -2.51%) 512 11.088 us 12.505 us( 12.78%) 10.206 us( -7.95%) 1024 11.240 us 12.255 us( 9.03%) 10.631 us( -5.42%) 2048 11.485 us 16.970 us( 47.76%) 10.981 us( -4.39%) 4096 12.077 us 13.948 us( 15.49%) 11.847 us( -1.90%) 8192 13.683 us 16.693 us( 22.00%) 13.336 us( -2.54%) 16384 16.470 us 23.615 us( 43.38%) 16.519 us( 0.30%) 32768 22.540 us 40.966 us( 81.75%) 22.452 us( -0.39%) 65536 34.192 us 73.003 us(113.51%) 33.916 us( -0.81%) ------------ Test environment notes: 1. Testing is run on 2 VMs within the same physical host 2. The NIC is ConnectX-4Lx, using SRIOV, and passing through 2 VFs to the 2 VMs respectively. 3. To decrease jitter, VM's vCPU are binded to each physical CPU, and those physical CPUs are all isolated using boot parameter `isolcpus=xxx` 4. The queue number are set to 1, and interrupt from the queue is binded to CPU0 in the guest ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== HW counters for soft devices Petr says: Offloading switch device drivers may be able to collect statistics of the traffic taking place in the HW datapath that pertains to a certain soft netdevice, such as a VLAN. In this patch set, add the necessary infrastructure to allow exposing these statistics to the offloaded netdevice in question, and add mlxsw offload. Across HW platforms, the counter itself very likely constitutes a limited resource, and the act of counting may have a performance impact. Therefore this patch set makes the HW statistics collection opt-in and togglable from userspace on a per-netdevice basis. Additionally, HW devices may have various limiting conditions under which they can realize the counter. Therefore it is also possible to query whether the requested counter is realized by any driver. In TC parlance, which is to a degree reused in this patch set, two values are recognized: "request" tracks whether the user enabled collecting HW statistics, and "used" tracks whether any HW statistics are actually collected. In the past, this author has expressed the opinion that `a typical user doing "ip -s l sh", including various scripts, wants to see the full picture and not worry what's going on where'. While that would be nice, unfortunately it cannot work: - Packets that trap from the HW datapath to the SW datapath would be double counted. For a given netdevice, some traffic can be purely a SW artifact, and some may flow through the HW object corresponding to the netdevice. But some traffic can also get trapped to the SW datapath after bumping the HW counter. It is not clear how to make sure double-counting does not occur in the SW datapath in that case, while still making sure that possibly divergent SW forwarding path gets bumped as appropriate. So simply adding HW and SW stats may work roughly, most of the time, but there are scenarios where the result is nonsensical. - HW devices will have limitations as to what type of traffic they can count. In case of mlxsw, which is part of this patch set, there is no reasonable way to count all traffic going through a certain netdevice, such as a VLAN netdevice enslaved to a bridge. It is however very simple to count traffic flowing through an L3 object, such as a VLAN netdevice with an IP address. Similarly for physical netdevices, the L3 object at which the counter is installed is the subport carrying untagged traffic. These are not "just counters". It is important that the user understands what is being counted. It would be incorrect to conflate these statistics with another existing statistics suite. To that end, this patch set introduces a statistics suite called "L3 stats". This label should make it easy to understand what is being counted, and to decide whether a given device can or cannot implement this suite for some type of netdevice. At the same time, the code is written to make future extensions easy, should a device pop up that can implement a different flavor of statistics suite (say L2, or an address-family-specific suite). For example, using a work-in-progress iproute2[1], to turn on and then list the counters on a VLAN netdevice: # ip stats set dev swp1.200 l3_stats on # ip stats show dev swp1.200 group offload subgroup l3_stats 56: swp1.200: group offload subgroup l3_stats on used on RX: bytes packets errors dropped missed mcast 0 0 0 0 0 0 TX: bytes packets errors dropped carrier collsns 0 0 0 0 0 0 The patchset progresses as follows: - Patch #1 is a cleanup. - In patch #2, remove the assumption that all LINK_OFFLOAD_XSTATS are dev-backed. The only attribute defined under the nest is currently IFLA_OFFLOAD_XSTATS_CPU_HIT. L3_STATS differs from CPU_HIT in that the driver that supplies the statistics is not the same as the driver that implements the netdevice. Make the code compatible with this in patch #2. - In patch #3, add the possibility to filter inside nests. The filter_mask field of RTM_GETSTATS header determines which top-level attributes should be included in the netlink response. This saves processing time by only including the bits that the user cares about instead of always dumping everything. This is doubly important for HW-backed statistics that would typically require a trip to the device to fetch the stats. In this patch, the UAPI is extended to allow filtering inside IFLA_STATS_LINK_OFFLOAD_XSTATS in particular, but the scheme is easily extensible to other nests as well. - In patch #4, propagate extack where we need it. In patch #5, make it possible to propagate errors from drivers to the user. - In patch #6, add the in-kernel APIs for keeping track of the new stats suite, and the notifiers that the core uses to communicate with the drivers. - In patch #7, add UAPI for obtaining the new stats suite. - In patch #8, add a new UAPI message, RTM_SETSTATS, which will carry the message to toggle the newly-added stats suite. In patch #9, add the toggle itself. At this point the core is ready for drivers to add support for the new stats suite. - In patches #10, #11 and #12, apply small tweaks to mlxsw code. - In patch #13, add support for L3 stats, which are realized as RIF counters. - Finally in patch #14, a selftest is added to the net/forwarding directory. Technically this is a HW-specific test, in that without a HW implementing the counters, it just will not pass. But devices that support L3 statistics at all are likely to be able to reuse this selftest, so it seems appropriate to put it in the general forwarding directory. We also have a netdevsim implementation, and a corresponding selftest that verifies specifically some of the core code. We intend to contribute these later. Interested parties can take a look at the raw code at [2]. [1] https://github.com/pmachata/iproute2/commits/soft_counters [2] https://github.com/pmachata/linux_mlxsw/commits/petrm_soft_counters_2 v2: - Patch #3: - Do not declare strict_start_type at the new policies, since they are used with nla_parse_nested() (sans _deprecated). - Use NLA_POLICY_NESTED to declare what the nest contents should be - Use NLA_POLICY_MASK instead of BITFIELD32 for the filtering attribute. - Patch #6: - s/monotonous/monotonic/ in commit message - Use a newly-added struct rtnl_hw_stats64 for stats transfer - Patch #7: - Use a newly-added struct rtnl_hw_stats64 for stats transfer - Patch #8: - Do not declare strict_start_type at the new policies, since they are used with nla_parse_nested() (sans _deprecated). - Patch #13: - Use a newly-added struct rtnl_hw_stats64 for stats transfer ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

In remove_phb_dynamic() we use &phb->io_resource, after we've called device_unregister(&host_bridge->dev). But the unregister may have freed phb, because pcibios_free_controller_deferred() is the release function for the host_bridge. If there are no outstanding references when we call device_unregister() then phb will be freed out from under us. This has gone mainly unnoticed, but with slub_debug and page_poison enabled it can lead to a crash: PID: 7574 TASK: c0000000d492cb80 CPU: 13 COMMAND: "drmgr" #0 [c0000000e4f075a0] crash_kexec at c00000000027d7dc #1 [c0000000e4f075d0] oops_end at c000000000029608 #2 [c0000000e4f07650] __bad_page_fault at c0000000000904b4 #3 [c0000000e4f076c0] do_bad_slb_fault at c00000000009a5a8 #4 [c0000000e4f076f0] data_access_slb_common_virt at c000000000008b30 Data SLB Access [380] exception frame: R0: c000000000167250 R1: c0000000e4f07a00 R2: c000000002a46100 R3: c000000002b39ce8 R4: 00000000000000c0 R5: 00000000000000a9 R6: 3894674d000000c0 R7: 0000000000000000 R8: 00000000000000ff R9: 0000000000000100 R10: 6b6b6b6b6b6b6b6b R11: 0000000000008000 R12: c00000000023da80 R13: c0000009ffd38b00 R14: 0000000000000000 R15: 000000011c87f0f0 R16: 0000000000000006 R17: 0000000000000003 R18: 0000000000000002 R19: 0000000000000004 R20: 0000000000000005 R21: 000000011c87ede8 R22: 000000011c87c5a8 R23: 000000011c87d3a0 R24: 0000000000000000 R25: 0000000000000001 R26: c0000000e4f07cc8 R27: c00000004d1cc400 R28: c0080000031d00e8 R29: c00000004d23d800 R30: c00000004d1d2400 R31: c00000004d1d2540 NIP: c000000000167258 MSR: 8000000000009033 OR3: c000000000e9f474 CTR: 0000000000000000 LR: c000000000167250 XER: 0000000020040003 CCR: 0000000024088420 MQ: 0000000000000000 DAR: 6b6b6b6b6b6b6ba3 DSISR: c0000000e4f07920 Syscall Result: fffffffffffffff2 [NIP : release_resource+56] [LR : release_resource+48] #5 [c0000000e4f07a00] release_resource at c000000000167258 (unreliable) #6 [c0000000e4f07a30] remove_phb_dynamic at c000000000105648 #7 [c0000000e4f07ab0] dlpar_remove_slot at c0080000031a09e8 [rpadlpar_io] #8 [c0000000e4f07b50] remove_slot_store at c0080000031a0b9c [rpadlpar_io] #9 [c0000000e4f07be0] kobj_attr_store at c000000000817d8c #10 [c0000000e4f07c00] sysfs_kf_write at c00000000063e504 #11 [c0000000e4f07c20] kernfs_fop_write_iter at c00000000063d868 #12 [c0000000e4f07c70] new_sync_write at c00000000054339c #13 [c0000000e4f07d10] vfs_write at c000000000546624 #14 [c0000000e4f07d60] ksys_write at c0000000005469f4 #15 [c0000000e4f07db0] system_call_exception at c000000000030840 #16 [c0000000e4f07e10] system_call_vectored_common at c00000000000c168 To avoid it, we can take a reference to the host_bridge->dev until we're done using phb. Then when we drop the reference the phb will be freed. Fixes: 2dd9c11 ("powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)") Reported-by: David Dai <zdai@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Sachin Sant <sachinp@linux.ibm.com> Link: https://lore.kernel.org/r/20220318034219.1188008-1-mpe@ellerman.id.au

Pull drm updates from Dave Airlie: "Lots of work all over, Intel improving DG2 support, amdkfd CRIU support, msm new hw support, and faster fbdev support. dma-buf: - rename dma-buf-map to iosys-map core: - move buddy allocator to core - add pci/platform init macros - improve EDID parser deep color handling - EDID timing type 7 support - add GPD Win Max quirk - add yes/no helpers to string_helpers - flatten syncobj chains - add nomodeset support to lots of drivers - improve fb-helper clipping support - add default property value interface fbdev: - improve fbdev ops speed ttm: - add a backpointer from ttm bo->ttm resource dp: - move displayport headers - add a dp helper module bridge: - anx7625 atomic support, HDCP support panel: - split out panel-lvds and lvds bindings - find panels in OF subnodes privacy: - add chromeos privacy screen support fb: - hot unplug fw fb on forced removal simpledrm: - request region instead of marking ioresource busy - add panel oreintation property udmabuf: - fix oops with 0 pages amdgpu: - power management code cleanup - Enable freesync video mode by default - RAS code cleanup - Improve VRAM access for debug using SDMA - SR-IOV rework special register access and fixes - profiling power state request ioctl - expose IP discovery via sysfs - Cyan skillfish updates - GC 10.3.7, SDMA 5.2.7, DCN 3.1.6 updates - expose benchmark tests via debugfs - add module param to disable XGMI for testing - GPU reset debugfs register dumping support amdkfd: - CRIU support - SDMA queue fixes radeon: - UVD suspend fix - iMac backlight fix i915: - minimal parallel submission for execlists - DG2-G12 subplatform added - DG2 programming workarounds - DG2 accelerated migration support - flat CCS and CCS engine support for XeHP - initial small BAR support - drop fake LMEM support - ADL-N PCH support - bigjoiner updates - introduce VMA resources and async unbinding - register definitions cleanups - multi-FBC refactoring - DG1 OPROM over SPI support - ADL-N platform enabling - opregion mailbox #5 support - DP MST ESI improvements - drm device based logging - async flip optimisation for DG2 - CPU arch abstraction fixes - improve GuC ADS init to work on aarch64 - tweak TTM LRU priority hint - GuC 69.0.3 support - remove short term execbuf pins nouveau: - higher DP/eDP bitrates - backlight fixes msm: - dpu + dp support for sc8180x - dp support for sm8350 - dpu + dsi support for qcm2290 - 10nm dsi phy tuning support - bridge support for dp encoder - gpu support for additional 7c3 SKUs ingenic: - HDMI support for JZ4780 - aux channel EDID support ast: - AST2600 support - add wide screen support - create DP/DVI connectors omapdrm: - fix implicit dma_buf fencing vc4: - add CSC + full range support - better display firmware handoff panfrost: - add initial dual-core GPU support stm: - new revision support - fb handover support mediatek: - transfer display binding document to yaml format. - add mt8195 display device binding. - allow commands to be sent during video mode. - add wait_for_event for crtc disable by cmdq. tegra: - YUV format support rcar-du: - LVDS support for M3-W+ (R8A77961) exynos: - BGR pixel format for FIMD device" * tag 'drm-next-2022-03-24' of git://anongit.freedesktop.org/drm/drm: (1529 commits) drm/i915/display: Do not re-enable PSR after it was marked as not reliable drm/i915/display: Fix HPD short pulse handling for eDP drm/amdgpu: Use drm_mode_copy() drm/radeon: Use drm_mode_copy() drm/amdgpu: Use ternary operator in `vcn_v1_0_start()` drm/amdgpu: Remove pointless on stack mode copies drm/amd/pm: fix indenting in __smu_cmn_reg_print_error() drm/amdgpu/dc: fix typos in comments drm/amdgpu: fix typos in comments drm/amd/pm: fix typos in comments drm/amdgpu: Add stolen reserved memory for MI25 SRIOV. drm/amdgpu: Merge get_reserved_allocation to get_vbios_allocations. drm/amdkfd: evict svm bo worker handle error drm/amdgpu/vcn: fix vcn ring test failure in igt reload test drm/amdgpu: only allow secure submission on rings which support that drm/amdgpu: fixed the warnings reported by kernel test robot drm/amd/display: 3.2.177 drm/amd/display: [FW Promotion] Release 0.0.108.0 drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2 drm/amd/display: Wait for hubp read line for Pollock ...

Patch series "mm: COW fixes part 1: fix the COW security issue for THP and swap", v3. This series attempts to optimize and streamline the COW logic for ordinary anon pages and THP anon pages, fixing two remaining instances of CVE-2020-29374 in do_swap_page() and do_huge_pmd_wp_page(): information can leak from a parent process to a child process via anonymous pages shared during fork(). This issue, including other related COW issues, has been summarized in [2]: "1. Observing Memory Modifications of Private Pages From A Child Process Long story short: process-private memory might not be as private as you think once you fork(): successive modifications of private memory regions in the parent process can still be observed by the child process, for example, by smart use of vmsplice()+munmap(). The core problem is that pinning pages readable in a child process, such as done via the vmsplice system call, can result in a child process observing memory modifications done in the parent process the child is not supposed to observe. [1] contains an excellent summary and [2] contains further details. This issue was assigned CVE-2020-29374 [9]. For this to trigger, it's required to use a fork() without subsequent exec(), for example, as used under Android zygote. Without further details about an application that forks less-privileged child processes, one cannot really say what's actually affected and what's not -- see the details section the end of this mail for a short sshd/openssh analysis. While commit 1783985 ("gup: document and work around "COW can break either way" issue") fixed this issue and resulted in other problems (e.g., ptrace on pmem), commit 09854ba ("mm: do_wp_page() simplification") re-introduced part of the problem unfortunately. The original reproducer can be modified quite easily to use THP [3] and make the issue appear again on upstream kernels. I modified it to use hugetlb [4] and it triggers as well. The problem is certainly less severe with hugetlb than with THP; it merely highlights that we still have plenty of open holes we should be closing/fixing. Regarding vmsplice(), the only known workaround is to disallow the vmsplice() system call ... or disable THP and hugetlb. But who knows what else is affected (RDMA? O_DIRECT?) to achieve the same goal -- in the end, it's a more generic issue" This security issue was first reported by Jann Horn on 27 May 2020 and it currently affects anonymous pages during swapin, anonymous THP and hugetlb. This series tackles anonymous pages during swapin and anonymous THP: - do_swap_page() for handling COW on PTEs during swapin directly - do_huge_pmd_wp_page() for handling COW on PMD-mapped THP during write faults With this series, we'll apply the same COW logic we have in do_wp_page() to all swappable anon pages: don't reuse (map writable) the page in case there are additional references (page_count() != 1). All users of reuse_swap_page() are remove, and consequently reuse_swap_page() is removed. In general, we're struggling with the following COW-related issues: (1) "missed COW": we miss to copy on write and reuse the page (map it writable) although we must copy because there are pending references from another process to this page. The result is a security issue. (2) "wrong COW": we copy on write although we wouldn't have to and shouldn't: if there are valid GUP references, they will become out of sync with the pages mapped into the page table. We fail to detect that such a page can be reused safely, especially if never more than a single process mapped the page. The result is an intra process memory corruption. (3) "unnecessary COW": we copy on write although we wouldn't have to: performance degradation and temporary increases swap+memory consumption can be the result. While this series fixes (1) for swappable anon pages, it tries to reduce reported cases of (3) first as good and easy as possible to limit the impact when streamlining. The individual patches try to describe in which cases we will run into (3). This series certainly makes (2) worse for THP, because a THP will now get PTE-mapped on write faults if there are additional references, even if there was only ever a single process involved: once PTE-mapped, we'll copy each and every subpage and won't reuse any subpage as long as the underlying compound page wasn't split. I'm working on an approach to fix (2) and improve (3): PageAnonExclusive to mark anon pages that are exclusive to a single process, allow GUP pins only on such exclusive pages, and allow turning exclusive pages shared (clearing PageAnonExclusive) only if there are no GUP pins. Anon pages with PageAnonExclusive set never have to be copied during write faults, but eventually during fork() if they cannot be turned shared. The improved reuse logic in this series will essentially also be the logic to reset PageAnonExclusive. This work will certainly take a while, but I'm planning on sharing details before having code fully ready. #1-#5 can be applied independently of the rest. #6-#9 are mostly only cleanups related to reuse_swap_page(). Notes: * For now, I'll leave hugetlb code untouched: "unnecessary COW" might easily break existing setups because hugetlb pages are a scarce resource and we could just end up having to crash the application when we run out of hugetlb pages. We have to be very careful and the security aspect with hugetlb is most certainly less relevant than for unprivileged anon pages. * Instead of lru_add_drain() we might actually just drain the lru_add list or even just remove the single page of interest from the lru_add list. This would require a new helper function, and could be added if the conditional lru_add_drain() turn out to be a problem. * I extended the test case already included in [1] to also test for the newly found do_swap_page() case. I'll send that out separately once/if this part was merged. [1] https://lkml.kernel.org/r/20211217113049.23850-1-david@redhat.com [2] https://lore.kernel.org/r/3ae33b08-d9ef-f846-56fb-645e3b9b4c66@redhat.com This patch (of 9): Liang Zhang reported [1] that the current COW logic in do_wp_page() is sub-optimal when it comes to swap+read fault+write fault of anonymous pages that have a single user, visible via a performance degradation in the redis benchmark. Something similar was previously reported [2] by Nadav with a simple reproducer. After we put an anon page into the swapcache and unmapped it from a single process, that process might read that page again and refault it read-only. If that process then writes to that page, the process is actually the exclusive user of the page, however, the COW logic in do_co_page() won't be able to reuse it due to the additional reference from the swapcache. Let's optimize for pages that have been added to the swapcache but only have an exclusive user. Try removing the swapcache reference if there is hope that we're the exclusive user. We will fail removing the swapcache reference in two scenarios: (1) There are additional swap entries referencing the page: copying instead of reusing is the right thing to do. (2) The page is under writeback: theoretically we might be able to reuse in some cases, however, we cannot remove the additional reference and will have to copy. Note that we'll only try removing the page from the swapcache when it's highly likely that we'll be the exclusive owner after removing the page from the swapache. As we're about to map that page writable and redirty it, that should not affect reclaim but is rather the right thing to do. Further, we might have additional references from the LRU pagevecs, which will force us to copy instead of being able to reuse. We'll try handling such references for some scenarios next. Concurrent writeback cannot be handled easily and we'll always have to copy. While at it, remove the superfluous page_mapcount() check: it's implicitly covered by the page_count() for ordinary anon pages. [1] https://lkml.kernel.org/r/20220113140318.11117-1-zhangliang5@huawei.com [2] https://lkml.kernel.org/r/0480D692-D9B2-429A-9A88-9BBA1331AC3A@gmail.com Link: https://lkml.kernel.org/r/20220131162940.210846-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Liang Zhang <zhangliang5@huawei.com> Reported-by: Nadav Amit <nadav.amit@gmail.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jann Horn <jannh@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Don Dutile <ddutile@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Andrii Nakryiko says: ==================== Add libbpf support for USDT (User Statically-Defined Tracing) probes. USDTs is important part of tracing, and BPF, ecosystem, widely used in mission-critical production applications for observability, performance analysis, and debugging. And while USDTs themselves are pretty complicated abstraction built on top of uprobes, for end-users USDT is as natural a primitive as uprobes themselves. And thus it's important for libbpf to provide best possible user experience when it comes to build tracing applications relying on USDTs. USDTs historically presented a lot of challenges for libbpf's no compilation-on-the-fly general approach to BPF tracing. BCC utilizes power of on-the-fly source code generation and compilation using its embedded Clang toolchain, which was impractical for more lightweight and thus more rigid libbpf-based approach. But still, with enough diligence and BPF cookies it's possible to implement USDT support that feels as natural as tracing any uprobe. This patch set is the culmination of such effort to add libbpf USDT support following the spirit and philosophy of BPF CO-RE (even though it's not inherently relying on BPF CO-RE much, see patch #1 for some notes regarding this). Each respective patch has enough details and explanations, so I won't go into details here. In the end, I think the overall usability of libbpf's USDT support *exceeds* the status quo set by BCC due to the elimination of awkward runtime USDT supporting code generation. It also exceeds BCC's capabilities due to the use of BPF cookie. This eliminates the need to determine a USDT call site (and thus specifics about how exactly to fetch arguments) based on its *absolute IP address*, which is impossible with shared libraries if no PID is specified (as we then just *can't* know absolute IP at which shared library is loaded, because it might be different for each process). With BPF cookie this is not a problem as we record "call site ID" directly in a BPF cookie value. This makes it possible to do a system-wide tracing of a USDT defined in a shared library. Think about tracing some USDT in libc across any process in the system, both running at the time of attachment and all the new processes started *afterwards*. This is a very powerful capability that allows more efficient observability and tracing tooling. Once this functionality lands, the plan is to extend libbpf-bootstrap ([0]) with an USDT example. It will also become possible to start converting BCC tools that rely on USDTs to their libbpf-based counterparts ([1]). It's worth noting that preliminary version of this code was currently used and tested in production code running fleet-wide observability toolkit. Libbpf functionality is broken down into 5 mostly logically independent parts, for ease of reviewing: - patch #1 adds BPF-side implementation; - patch #2 adds user-space APIs and wires bpf_link for USDTs; - patch #3 adds the most mundate pieces: handling ELF, parsing USDT notes, dealing with memory segments, relative vs absolute addresses, etc; - patch #4 adds internal ID allocation and setting up/tearing down of BPF-side state (spec and IP-to-ID mapping); - patch #5 implements x86/x86-64-specific logic of parsing USDT argument specifications; - patch #6 adds testing of various basic aspects of handling of USDT; - patch #7 extends the set of tests with more combinations of semaphore, executable vs shared library, and PID filter options. [0] https://github.com/libbpf/libbpf-bootstrap [1] https://github.com/iovisor/bcc/tree/master/libbpf-tools v2->v3: - fix typos, leave link to systemtap doc, acks, etc (Dave); - include sys/sdt.h to avoid extra system-wide package dependencies; v1->v2: - huge high-level comment describing how all the moving parts fit together (Alan, Alexei); - switched from `__hidden __weak` to `static inline __noinline` for now, as there is a bug in BPF linker breaking final BPF object file due to invalid .BTF.ext data; I want to fix it separately at which point I'll switch back to __hidden __weak again. The fix isn't trivial, so I don't want to block on that. Same for __weak variable lookup bug that Henqi reported. - various fixes and improvements, addressing other feedback (Alan, Hengqi); Cc: Alan Maguire <alan.maguire@oracle.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Hengqi Chen <hengqi.chen@gmail.com> ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>

As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

There is possible circular locking dependency detected on event_mutex (see below logs). This is due to set fail safe mode is done at dp_panel_read_sink_caps() within event_mutex scope. To break this possible circular locking, this patch move setting fail safe mode out of event_mutex scope. [ 23.958078] ====================================================== [ 23.964430] WARNING: possible circular locking dependency detected [ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e #148 Not tainted [ 23.977219] ------------------------------------------------------ [ 23.983570] DrmThread/1574 is trying to acquire lock: [ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164 [ 23.997895] [ 23.997895] but task is already holding lock: [ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c [ 24.012495] [ 24.012495] which lock already depends on the new lock. [ 24.012495] [ 24.020886] [ 24.020886] the existing dependency chain (in reverse order) is: [ 24.028570] [ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}: [ 24.035472] __mutex_lock+0xc8/0x384 [ 24.039695] mutex_lock_nested+0x54/0x74 [ 24.044272] lock_crtcs+0x80/0x8c [ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.053413] commit_tail+0x7c/0xfc [ 24.057452] drm_atomic_helper_commit+0x158/0x15c [ 24.062826] drm_atomic_commit+0x60/0x74 [ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.072508] drm_ioctl_kernel+0xe8/0x168 [ 24.077086] drm_ioctl+0x320/0x370 [ 24.081123] drm_compat_ioctl+0x40/0xdc [ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.090895] invoke_syscall+0x80/0x114 [ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.100668] do_el0_svc_compat+0x2c/0x54 [ 24.105242] el0_svc_compat+0x4c/0xe4 [ 24.109548] el0t_32_sync_handler+0xc4/0xf4 [ 24.114381] el0t_32_sync+0x178 [ 24.118688] [ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}: [ 24.125408] __mutex_lock+0xc8/0x384 [ 24.129628] mutex_lock_nested+0x54/0x74 [ 24.134204] lock_crtcs+0x80/0x8c [ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.143345] commit_tail+0x7c/0xfc [ 24.147382] drm_atomic_helper_commit+0x158/0x15c [ 24.152755] drm_atomic_commit+0x60/0x74 [ 24.157323] drm_atomic_helper_set_config+0x68/0x90 [ 24.162869] drm_mode_setcrtc+0x394/0x648 [ 24.167535] drm_ioctl_kernel+0xe8/0x168 [ 24.172102] drm_ioctl+0x320/0x370 [ 24.176135] drm_compat_ioctl+0x40/0xdc [ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.185904] invoke_syscall+0x80/0x114 [ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.195673] do_el0_svc_compat+0x2c/0x54 [ 24.200241] el0_svc_compat+0x4c/0xe4 [ 24.204544] el0t_32_sync_handler+0xc4/0xf4 [ 24.209378] el0t_32_sync+0x174/0x178 [ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}: [ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878 [ 24.225951] ww_mutex_lock+0x60/0xd0 [ 24.230166] modeset_lock+0x190/0x19c [ 24.234467] drm_modeset_lock+0x34/0x54 [ 24.238953] drmm_mode_config_init+0x550/0x764 [ 24.244065] msm_drm_bind+0x170/0x59c [ 24.248374] try_to_bring_up_master+0x244/0x294 [ 24.253572] __component_add+0xf4/0x14c [ 24.258057] component_add+0x2c/0x38 [ 24.262273] dsi_dev_attach+0x2c/0x38 [ 24.266575] dsi_host_attach+0xc4/0x120 [ 24.271060] mipi_dsi_attach+0x34/0x48 [ 24.275456] devm_mipi_dsi_attach+0x28/0x68 [ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc [ 24.285137] auxiliary_bus_probe+0x78/0x90 [ 24.289893] really_probe+0x1e4/0x3d8 [ 24.294194] __driver_probe_device+0x14c/0x164 [ 24.299298] driver_probe_device+0x54/0xf8 [ 24.304043] __device_attach_driver+0xb4/0x118 [ 24.309145] bus_for_each_drv+0xb0/0xd4 [ 24.313628] __device_attach+0xcc/0x158 [ 24.318112] device_initial_probe+0x24/0x30 [ 24.322954] bus_probe_device+0x38/0x9c [ 24.327439] deferred_probe_work_func+0xd4/0xf0 [ 24.332628] process_one_work+0x2f0/0x498 [ 24.337289] process_scheduled_works+0x44/0x48 [ 24.342391] worker_thread+0x1e4/0x26c [ 24.346788] kthread+0xe4/0xf4 [ 24.350470] ret_from_fork+0x10/0x20 [ 24.354683] [ 24.354683] [ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}: [ 24.361489] drm_modeset_acquire_init+0xe4/0x138 [ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114 [ 24.372327] check_connector_changed+0xbc/0x198 [ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c [ 24.382804] dsi_hpd_worker+0x24/0x30 [ 24.387104] process_one_work+0x2f0/0x498 [ 24.391762] worker_thread+0x1d0/0x26c [ 24.396158] kthread+0xe4/0xf4 [ 24.399840] ret_from_fork+0x10/0x20 [ 24.404053] [ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}: [ 24.411032] __mutex_lock+0xc8/0x384 [ 24.415247] mutex_lock_nested+0x54/0x74 [ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c [ 24.425108] dp_display_process_hpd_high+0x34/0xd4 [ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c [ 24.436205] hpd_event_thread+0x2ac/0x550 [ 24.440864] kthread+0xe4/0xf4 [ 24.444544] ret_from_fork+0x10/0x20 [ 24.448757] [ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}: [ 24.455116] __lock_acquire+0xe2c/0x10d8 [ 24.459690] lock_acquire+0x1ac/0x2d0 [ 24.463988] __mutex_lock+0xc8/0x384 [ 24.468201] mutex_lock_nested+0x54/0x74 [ 24.472773] msm_dp_display_enable+0x58/0x164 [ 24.477789] dp_bridge_enable+0x24/0x30 [ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c [ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244 [ 24.494801] msm_atomic_commit_tail+0x248/0x3d0 [ 24.499992] commit_tail+0x7c/0xfc [ 24.504031] drm_atomic_helper_commit+0x158/0x15c [ 24.509404] drm_atomic_commit+0x60/0x74 [ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.519079] drm_ioctl_kernel+0xe8/0x168 [ 24.523650] drm_ioctl+0x320/0x370 [ 24.527689] drm_compat_ioctl+0x40/0xdc [ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.537463] invoke_syscall+0x80/0x114 [ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.547235] do_el0_svc_compat+0x2c/0x54 [ 24.551806] el0_svc_compat+0x4c/0xe4 [ 24.556106] el0t_32_sync_handler+0xc4/0xf4 [ 24.560948] el0t_32_sync+0x174/0x178 Changes in v2: -- add circular lockiing trace Fixes: d4aca42 ("drm/msm/dp: always add fail-safe mode into connector mode list") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/481396/ Link: https://lore.kernel.org/r/1649451894-554-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>

Our detector found a concurrent use-after-free bug when detaching an NCI device. The main reason for this bug is the unexpected scheduling between the used delayed mechanism (timer and workqueue). The race can be demonstrated below: Thread-1 Thread-2 | nci_dev_up() | nci_open_device() | __nci_request(nci_reset_req) | nci_send_cmd | queue_work(cmd_work) nci_unregister_device() | nci_close_device() | ... del_timer_sync(cmd_timer)[1] | ... | Worker nci_free_device() | nci_cmd_work() kfree(ndev)[3] | mod_timer(cmd_timer)[2] In short, the cleanup routine thought that the cmd_timer has already been detached by [1] but the mod_timer can re-attach the timer [2], even it is already released [3], resulting in UAF. This UAF is easy to trigger, crash trace by POC is like below [ 66.703713] ================================================================== [ 66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490 [ 66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33 [ 66.703974] [ 66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5 [ 66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work [ 66.703974] Call Trace: [ 66.703974] <TASK> [ 66.703974] dump_stack_lvl+0x57/0x7d [ 66.703974] print_report.cold+0x5e/0x5db [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] kasan_report+0xbe/0x1c0 [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] enqueue_timer+0x448/0x490 [ 66.703974] __mod_timer+0x5e6/0xb80 [ 66.703974] ? mark_held_locks+0x9e/0xe0 [ 66.703974] ? try_to_del_timer_sync+0xf0/0xf0 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [ 66.703974] ? queue_work_on+0x61/0x80 [ 66.703974] ? lockdep_hardirqs_on+0xbf/0x130 [ 66.703974] process_one_work+0x8bb/0x1510 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 66.703974] ? pwq_dec_nr_in_flight+0x230/0x230 [ 66.703974] ? rwlock_bug.part.0+0x90/0x90 [ 66.703974] ? _raw_spin_lock_irq+0x41/0x50 [ 66.703974] worker_thread+0x575/0x1190 [ 66.703974] ? process_one_work+0x1510/0x1510 [ 66.703974] kthread+0x2a0/0x340 [ 66.703974] ? kthread_complete_and_exit+0x20/0x20 [ 66.703974] ret_from_fork+0x22/0x30 [ 66.703974] </TASK> [ 66.703974] [ 66.703974] Allocated by task 267: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] __kasan_kmalloc+0x81/0xa0 [ 66.703974] nci_allocate_device+0xd3/0x390 [ 66.703974] nfcmrvl_nci_register_dev+0x183/0x2c0 [ 66.703974] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 66.703974] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 66.703974] tty_ioctl+0x764/0x1310 [ 66.703974] __x64_sys_ioctl+0x122/0x190 [ 66.703974] do_syscall_64+0x3b/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 66.703974] [ 66.703974] Freed by task 406: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] kasan_set_track+0x21/0x30 [ 66.703974] kasan_set_free_info+0x20/0x30 [ 66.703974] __kasan_slab_free+0x108/0x170 [ 66.703974] kfree+0xb0/0x330 [ 66.703974] nfcmrvl_nci_unregister_dev+0x90/0xd0 [ 66.703974] nci_uart_tty_close+0xdf/0x180 [ 66.703974] tty_ldisc_kill+0x73/0x110 [ 66.703974] tty_ldisc_hangup+0x281/0x5b0 [ 66.703974] __tty_hangup.part.0+0x431/0x890 [ 66.703974] tty_release+0x3a8/0xc80 [ 66.703974] __fput+0x1f0/0x8c0 [ 66.703974] task_work_run+0xc9/0x170 [ 66.703974] exit_to_user_mode_prepare+0x194/0x1a0 [ 66.703974] syscall_exit_to_user_mode+0x19/0x50 [ 66.703974] do_syscall_64+0x48/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae To fix the UAF, this patch adds flush_workqueue() to ensure the nci_cmd_work is finished before the following del_timer_sync. This combination will promise the timer is actually detached. Fixes: 6a2968a ("NFC: basic NCI protocol implementation") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>

…e name Add prefix "lc#n" to thermal zones associated with the thermal objects found on line cards. For example thermal zone for module #9 located at line card #7 will have type: mlxsw-lc7-module9. And thermal zone for gearbox #3 located at line card #5 will have type: mlxsw-lc5-gearbox3. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Preparations for line cards support Currently, mlxsw registers thermal zones as well as hwmon entries for objects such as transceiver modules and gearboxes. In upcoming modular systems, these objects are no longer found on the main board (i.e., slot 0), but on plug-able line cards. This patchset prepares mlxsw for such systems in terms of hwmon, thermal and cable access support. Patches #1-#3 gradually prepare mlxsw for transceiver modules access support for line cards by splitting some of the internal structures and some APIs. Patches #4-#5 gradually prepare mlxsw for hwmon support for line cards by splitting some of the internal structures and augmenting them with a slot index. Patches #6-#7 do the same for thermal zones. Patch #8 selects cooling device for binding to a thermal zone by exact name match to prevent binding to non-relevant devices. Patch #9 replaces internal define for thermal zone name length with a common define. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…de-initialization Add callback functions for line card thermal area initialization and de-initialization. Each line card is associated with the relevant thermal area, which may contain thermal zones for cages and gearboxes found on this line card. The line card thermal initialization / de-initialization APIs are to be called when line card is set to active / inactive state by got_active() / got_inactive() callbacks from line card state machine. For example thermal zone for module #9 located at line card #7 will have type: mlxsw-lc7-module9. And thermal zone for gearbox #2 located at line card #5 will have type: mlxsw-lc5-gearbox2. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…-initialization Add callback functions for line card 'hwmon' initialization and de-initialization. Each line card is associated with the relevant 'hwmon' device, which may contain thermal attributes for the cages and gearboxes found on this line card. The line card 'hwmon' initialization / de-initialization APIs are to be called when line card is set to active / inactive state by got_active() / got_inactive() callbacks from line card state machine. For example cage temperature for module #9 located at line card #7 will be exposed by utility 'sensors' like: linecard#07 front panel 009: +32.0C (crit = +70.0C, emerg = +80.0C) And temperature for gearbox #3 located at line card #5 will be exposed like: linecard#05 gearbox 003: +41.0C (highest = +41.0C) Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says: ==================== mlxsw: Line cards status tracking When a line card is provisioned, netdevs corresponding to the ports found on the line card are registered. User space can then perform various logical configurations (e.g., splitting, setting MTU) on these netdevs. However, since the line card is not present / powered on (i.e., it is not in 'active' state), user space cannot access the various components found on the line card. For example, user space cannot read the temperature of gearboxes or transceiver modules found on the line card via hwmon / thermal. Similarly, it cannot dump the EEPROM contents of these transceiver modules. The above is only possible when the line card becomes active. This patchset solves the problem by tracking the status of each line card and invoking callbacks from interested parties when a line card becomes active / inactive. Patchset overview: Patch #1 adds the infrastructure in the line cards core that allows users to registers a set of callbacks that are invoked when a line card becomes active / inactive. To avoid races, if a line card is already active during registration, the got_active() callback is invoked. Patches #2-#3 are preparations. Patch #4 changes the port module core to register a set of callbacks with the line cards core. See detailed description with examples in the commit message. Patches #5-#6 do the same with regards to thermal / hwmon support, so that user space will be able to monitor the temperature of various components on the line card when it becomes active. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As reported by Alan, the CFI (Call Frame Information) in the VDSO time routines is incorrect since commit ce7d805 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation."). DWARF has a concept called the CFA (Canonical Frame Address), which on powerpc is calculated as an offset from the stack pointer (r1). That means when the stack pointer is changed there must be a corresponding CFI directive to update the calculation of the CFA. The current code is missing those directives for the changes to r1, which prevents gdb from being able to generate a backtrace from inside VDSO functions, eg: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x00007fffffffd960 in ?? () #3 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 Backtrace stopped: frame did not save the PC Alan helpfully describes some rules for correctly maintaining the CFI information: 1) Every adjustment to the current frame address reg (ie. r1) must be described, and exactly at the instruction where r1 changes. Why? Because stack unwinding might want to access previous frames. 2) If a function changes LR or any non-volatile register, the save location for those regs must be given. The CFI can be at any instruction after the saves up to the point that the reg is changed. (Exception: LR save should be described before a bl. not after) 3) If asychronous unwind info is needed then restores of LR and non-volatile regs must also be described. The CFI can be at any instruction after the reg is restored up to the point where the save location is (potentially) trashed. Fix the inability to backtrace by adding CFI directives describing the changes to r1, ie. satisfying rule 1. Also change the information for LR to point to the copy saved on the stack, not the value in r0 that will be overwritten by the function call. Finally, add CFI directives describing the save/restore of r2. With the fix gdb can correctly back trace and navigate up and down the stack: Breakpoint 1, 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) bt #0 0x00007ffff7f804dc in __kernel_clock_gettime () #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 #2 0x0000000100015b60 in gettime () #3 0x000000010000c8bc in print_long_format () #4 0x000000010000d180 in print_current_files () #5 0x00000001000054ac in main () (gdb) up #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #2 0x0000000100015b60 in gettime () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #4 0x000000010000d180 in print_current_files () (gdb) #5 0x00000001000054ac in main () (gdb) Initial frame selected; you cannot go up. (gdb) down #4 0x000000010000d180 in print_current_files () (gdb) #3 0x000000010000c8bc in print_long_format () (gdb) #2 0x0000000100015b60 in gettime () (gdb) #1 0x00007ffff7d8872c in clock_gettime@@GLIBC_2.17 () from /lib64/libc.so.6 (gdb) #0 0x00007ffff7f804dc in __kernel_clock_gettime () (gdb) Fixes: ce7d805 ("powerpc/vdso: Prepare for switching VDSO to generic C implementation.") Cc: stable@vger.kernel.org # v5.11+ Reported-by: Alan Modra <amodra@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Link: https://lore.kernel.org/r/20220502125010.1319370-1-mpe@ellerman.id.au

Do not allow to write timestamps on RX rings if PF is being configured. When PF is being configured RX rings can be freed or rebuilt. If at the same time timestamps are updated, the kernel will crash by dereferencing null RX ring pointer. PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51" #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e [exception RIP: ice_ptp_update_cached_phctime+91] RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246 RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648 R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice] #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f Fixes: 77a7811 ("ice: enable receive hardware timestamping") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Michal Schmidt <mschmidt@redhat.com> Tested-by: Dave Cain <dcain@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

…uctions Add several ./test_progs tests: - arena_atomics/load_acquire - arena_atomics/store_release - verifier_load_acquire/* - verifier_store_release/* - verifier_precision/bpf_load_acquire - verifier_precision/bpf_store_release The last two tests are added to check if backtrack_insn() handles the new instructions correctly. Additionally, the last test also makes sure that the verifier "remembers" the value (in src_reg) we store-release into e.g. a stack slot. For example, if we take a look at the test program: #0: r1 = 8; /* store_release((u64 *)(r10 - 8), r1); */ #1: .8byte %[store_release]; #2: r1 = *(u64 *)(r10 - 8); #3: r2 = r10; #4: r2 += r1; #5: r0 = 0; #6: exit; At #1, if the verifier doesn't remember that we wrote 8 to the stack, then later at #4 we would be adding an unbounded scalar value to the stack pointer, which would cause the program to be rejected: VERIFIER LOG: ============= ... math between fp pointer and register with unbounded min value is not allowed For easier CI integration, instead of using built-ins like __atomic_{load,store}_n() which depend on the new __BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft load-acquire/store-release instructions using __imm_insn(), as suggested by Eduard. All new tests depend on: (1) Clang major version >= 18, and (2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or v4), and (3) JIT supports load-acquire/store-release (currently only arm64) In .../progs/arena_atomics.c: /* 8-byte-aligned */ __u8 __arena_global load_acquire8_value = 0x12; /* 1-byte hole */ __u16 __arena_global load_acquire16_value = 0x1234; That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to crash: fatal error: error in backend: unable to write nop sequence of 1 bytes To work around such llvm-17 CI job failures, conditionally define __arena_global variables as 64-bit if __clang_major__ < 18, to make sure .addr_space.1 has no holes. Ideally we should avoid compiling this file using clang-17 at all (arena tests depend on __BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but that is a separate topic. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Peilin Ye <yepeilin@google.com>

…uctions Add several ./test_progs tests: - arena_atomics/load_acquire - arena_atomics/store_release - verifier_load_acquire/* - verifier_store_release/* - verifier_precision/bpf_load_acquire - verifier_precision/bpf_store_release The last two tests are added to check if backtrack_insn() handles the new instructions correctly. Additionally, the last test also makes sure that the verifier "remembers" the value (in src_reg) we store-release into e.g. a stack slot. For example, if we take a look at the test program: #0: r1 = 8; /* store_release((u64 *)(r10 - 8), r1); */ #1: .8byte %[store_release]; #2: r1 = *(u64 *)(r10 - 8); #3: r2 = r10; #4: r2 += r1; #5: r0 = 0; #6: exit; At #1, if the verifier doesn't remember that we wrote 8 to the stack, then later at #4 we would be adding an unbounded scalar value to the stack pointer, which would cause the program to be rejected: VERIFIER LOG: ============= ... math between fp pointer and register with unbounded min value is not allowed For easier CI integration, instead of using built-ins like __atomic_{load,store}_n() which depend on the new __BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft load-acquire/store-release instructions using __imm_insn(), as suggested by Eduard. All new tests depend on: (1) Clang major version >= 18, and (2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or v4), and (3) JIT supports load-acquire/store-release (currently arm64 and x86-64) In .../progs/arena_atomics.c: /* 8-byte-aligned */ __u8 __arena_global load_acquire8_value = 0x12; /* 1-byte hole */ __u16 __arena_global load_acquire16_value = 0x1234; That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to crash: fatal error: error in backend: unable to write nop sequence of 1 bytes To work around such llvm-17 CI job failures, conditionally define __arena_global variables as 64-bit if __clang_major__ < 18, to make sure .addr_space.1 has no holes. Ideally we should avoid compiling this file using clang-17 at all (arena tests depend on __BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but that is a separate topic. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Peilin Ye <yepeilin@google.com>

…uctions Add several ./test_progs tests: - arena_atomics/load_acquire - arena_atomics/store_release - verifier_load_acquire/* - verifier_store_release/* - verifier_precision/bpf_load_acquire - verifier_precision/bpf_store_release The last two tests are added to check if backtrack_insn() handles the new instructions correctly. Additionally, the last test also makes sure that the verifier "remembers" the value (in src_reg) we store-release into e.g. a stack slot. For example, if we take a look at the test program: #0: r1 = 8; /* store_release((u64 *)(r10 - 8), r1); */ #1: .8byte %[store_release]; #2: r1 = *(u64 *)(r10 - 8); #3: r2 = r10; #4: r2 += r1; #5: r0 = 0; #6: exit; At #1, if the verifier doesn't remember that we wrote 8 to the stack, then later at #4 we would be adding an unbounded scalar value to the stack pointer, which would cause the program to be rejected: VERIFIER LOG: ============= ... math between fp pointer and register with unbounded min value is not allowed For easier CI integration, instead of using built-ins like __atomic_{load,store}_n() which depend on the new __BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft load-acquire/store-release instructions using __imm_insn(), as suggested by Eduard. All new tests depend on: (1) Clang major version >= 18, and (2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or v4), and (3) JIT supports load-acquire/store-release (currently arm64 and x86-64) In .../progs/arena_atomics.c: /* 8-byte-aligned */ __u8 __arena_global load_acquire8_value = 0x12; /* 1-byte hole */ __u16 __arena_global load_acquire16_value = 0x1234; That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to crash: fatal error: error in backend: unable to write nop sequence of 1 bytes To work around such llvm-17 CI job failures, conditionally define __arena_global variables as 64-bit if __clang_major__ < 18, to make sure .addr_space.1 has no holes. Ideally we should avoid compiling this file using clang-17 at all (arena tests depend on __BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but that is a separate topic. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Peilin Ye <yepeilin@google.com> Link: https://lore.kernel.org/r/1b46c6feaf0f1b6984d9ec80e500cc7383e9da1a.1741049567.git.yepeilin@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Chia-Yu Chang says: ==================== AccECN protocol preparation patch series Please find the v7 v7 (03-Mar-2025) - Move 2 new patches added in v6 to the next AccECN patch series v6 (27-Dec-2024) - Avoid removing removing the potential CA_ACK_WIN_UPDATE in ack_ev_flags of patch #1 (Eric Dumazet <edumazet@google.com>) - Add reviewed-by tag in patches #2, #3, #4, #5, #6, #7, #8, #12, #14 - Foloiwng 2 new pathces are added after patch #9 (Patch that adds SKB_GSO_TCP_ACCECN) * New patch #10 to replace exisiting SKB_GSO_TCP_ECN with SKB_GSO_TCP_ACCECN in the driver to avoid CWR flag corruption * New patch #11 adds AccECN for virtio by adding new negotiation flag (VIRTIO_NET_F_HOST/GUEST_ACCECN) in feature handshake and translating Accurate ECN GSO flag between virtio_net_hdr (VIRTIO_NET_HDR_GSO_ACCECN) and skb header (SKB_GSO_TCP_ACCECN) - Add detailed changelog and comments in #13 (Eric Dumazet <edumazet@google.com>) - Move patch #14 to the next AccECN patch series (Eric Dumazet <edumazet@google.com>) v5 (5-Nov-2024) - Add helper function "tcp_flags_ntohs" to preserve last 2 bytes of TCP flags of patch #4 (Paolo Abeni <pabeni@redhat.com>) - Fix reverse X-max tree order of patches #4, #11 (Paolo Abeni <pabeni@redhat.com>) - Rename variable "delta" as "timestamp_delta" of patch #2 fo clariety - Remove patch #14 in this series (Paolo Abeni <pabeni@redhat.com>, Joel Granados <joel.granados@kernel.org>) v4 (21-Oct-2024) - Fix line length warning of patches #2, #4, #8, #10, #11, #14 - Fix spaces preferred around '|' (ctx:VxV) warning of patch #7 - Add missing CC'ed of patches #4, #12, #14 v3 (19-Oct-2024) - Fix build error in v2 v2 (18-Oct-2024) - Fix warning caused by NETIF_F_GSO_ACCECN_BIT in patch #9 (Jakub Kicinski <kuba@kernel.org>) The full patch series can be found in https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

With the device instance lock, there is now a possibility of a deadlock: [ 1.211455] ============================================ [ 1.211571] WARNING: possible recursive locking detected [ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted [ 1.211823] -------------------------------------------- [ 1.211936] ip/184 is trying to acquire lock: [ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0 [ 1.212207] [ 1.212207] but task is already holding lock: [ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.212487] [ 1.212487] other info that might help us debug this: [ 1.212626] Possible unsafe locking scenario: [ 1.212626] [ 1.212751] CPU0 [ 1.212815] ---- [ 1.212871] lock(&dev->lock); [ 1.212944] lock(&dev->lock); [ 1.213016] [ 1.213016] *** DEADLOCK *** [ 1.213016] [ 1.213143] May be due to missing lock nesting notation [ 1.213143] [ 1.213294] 3 locks held by ip/184: [ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0 [ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0 [ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0 [ 1.213895] [ 1.213895] stack backtrace: [ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 [ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 1.213994] Call Trace: [ 1.213995] <TASK> [ 1.213996] dump_stack_lvl+0x8e/0xd0 [ 1.214000] print_deadlock_bug+0x28b/0x2a0 [ 1.214020] lock_acquire+0xea/0x2a0 [ 1.214027] __mutex_lock+0xbf/0xd40 [ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI [ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev [ 1.214042] __dev_open+0x145/0x270 [ 1.214046] __dev_change_flags+0xb0/0x1e0 [ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev [ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info [ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0 [ 1.214058] notifier_call_chain+0x78/0x120 [ 1.214062] netif_open+0x6d/0x90 [ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0 [ 1.214066] bond_enslave+0x64c/0x1230 [ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0 [ 1.214077] do_setlink+0x516/0x13b0 [ 1.214094] rtnl_newlink+0xaba/0xb80 [ 1.214132] rtnetlink_rcv_msg+0x440/0x490 [ 1.214144] netlink_rcv_skb+0xeb/0x120 [ 1.214150] netlink_unicast+0x1f9/0x320 [ 1.214153] netlink_sendmsg+0x346/0x3f0 [ 1.214157] __sock_sendmsg+0x86/0xb0 [ 1.214160] ____sys_sendmsg+0x1c8/0x220 [ 1.214164] ___sys_sendmsg+0x28f/0x2d0 [ 1.214179] __x64_sys_sendmsg+0xef/0x140 [ 1.214184] do_syscall_64+0xec/0x1d0 [ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 1.214191] RIP: 0033:0x7f2d1b4a7e56 Device setup: netdevsim0 (down) ^ ^ bond netdevsim1.100@netdevsim1 allmulticast=on (down) When we enslave the lower device (netdevsim0) which has a vlan, we propagate vlan's allmuti/promisc flags during ndo_open. This causes (re)locking on of the real_dev. Propagate allmulti/promisc on flags change, not on the open. There is a slight semantics change that vlans that are down now propagate the flags, but this seems unlikely to result in the real issues. Reproducer: echo 0 1 > /sys/bus/netdevsim/new_device dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*) dev=$(echo $dev_path | rev | cut -d/ -f1 | rev) ip link set dev $dev name netdevsim0 ip link set dev netdevsim0 up ip link add link netdevsim0 name netdevsim0.100 type vlan id 100 ip link set dev netdevsim0.100 allmulticast on down ip link add name bond1 type bond mode 802.3ad ip link set dev netdevsim0 down ip link set dev netdevsim0 master bond1 ip link set dev bond1 up ip link show Reported-by: syzbot+b0c03d76056ef6cd12a6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/Z9CfXjLMKn6VLG5d@mini-arch/T/#m15ba130f53227c883e79fb969687d69d670337a0 Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250313100657.2287455-1-sdf@fomichev.me Signed-off-by: Paolo Abeni <pabeni@redhat.com>

perf test 11 hwmon fails on s390 with this error # ./perf test -Fv 11 --- start --- ---- end ---- 11.1: Basic parsing test : Ok --- start --- Testing 'temp_test_hwmon_event1' Using CPUID IBM,3931,704,A01,3.7,002f temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/ FAILED tests/hwmon_pmu.c:189 Unexpected config for 'temp_test_hwmon_event1', 292470092988416 != 655361 ---- end ---- 11.2: Parsing without PMU name : FAILED! --- start --- Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/' FAILED tests/hwmon_pmu.c:189 Unexpected config for 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/', 292470092988416 != 655361 ---- end ---- 11.3: Parsing with PMU name : FAILED! # The root cause is in member test_event::config which is initialized to 0xA0001 or 655361. During event parsing a long list event parsing functions are called and end up with this gdb call stack: #0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8, term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623 #1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662 #2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519 #3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8, head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1545 #4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8, list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090, auto_merge_stats=true, alternate_hw_config=10) at util/parse-events.c:1508 #5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8, event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10, const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0) at util/parse-events.c:1592 #6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8, scanner=0x16878c0) at util/parse-events.y:293 #7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8 "temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8) at util/parse-events.c:1867 #8 0x000000000126a1e8 in __parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0, err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true, fake_tp=false) at util/parse-events.c:2136 #9 0x00000000011e36aa in parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8) at /root/linux/tools/perf/util/parse-events.h:41 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false) at tests/hwmon_pmu.c:164 #11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false) at tests/hwmon_pmu.c:219 #12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368 <suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23 where the attr::config is set to value 292470092988416 or 0x10a0000000000 in line 625 of file ./util/hwmon_pmu.c: attr->config = key.type_and_num; However member key::type_and_num is defined as union and bit field: union hwmon_pmu_event_key { long type_and_num; struct { int num :16; enum hwmon_type type :8; }; }; s390 is big endian and Intel is little endian architecture. The events for the hwmon dummy pmu have num = 1 or num = 2 and type is set to HWMON_TYPE_TEMP (which is 10). On s390 this assignes member key::type_and_num the value of 0x10a0000000000 (which is 292470092988416) as shown in above trace output. Fix this and export the structure/union hwmon_pmu_event_key so the test shares the same implementation as the event parsing functions for union and bit fields. This should avoid endianess issues on all platforms. Output after: # ./perf test -F 11 11.1: Basic parsing test : Ok 11.2: Parsing without PMU name : Ok 11.3: Parsing with PMU name : Ok # Fixes: 531ee0f ("perf test: Add hwmon "PMU" test") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Ian told me that there are many memory leaks in the hierarchy mode. I can easily reproduce it with the follwing command. $ make DEBUG=1 EXTRA_CFLAGS=-fsanitize=leak $ perf record --latency -g -- ./perf test -w thloop $ perf report -H --stdio ... Indirect leak of 168 byte(s) in 21 object(s) allocated from: #0 0x7f3414c16c65 in malloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:75 #1 0x55ed3602346e in map__get util/map.h:189 #2 0x55ed36024cc4 in hist_entry__init util/hist.c:476 #3 0x55ed36025208 in hist_entry__new util/hist.c:588 #4 0x55ed36027c05 in hierarchy_insert_entry util/hist.c:1587 #5 0x55ed36027e2e in hists__hierarchy_insert_entry util/hist.c:1638 #6 0x55ed36027fa4 in hists__collapse_insert_entry util/hist.c:1685 #7 0x55ed360283e8 in hists__collapse_resort util/hist.c:1776 #8 0x55ed35de0323 in report__collapse_hists /home/namhyung/project/linux/tools/perf/builtin-report.c:735 #9 0x55ed35de15b4 in __cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1119 #10 0x55ed35de43dc in cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1867 #11 0x55ed35e66767 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:351 #12 0x55ed35e66a0e in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:404 #13 0x55ed35e66b67 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:448 #14 0x55ed35e66eb0 in main /home/namhyung/project/linux/tools/perf/perf.c:556 #15 0x7f340ac33d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 ... $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 93 I found that hist_entry__delete() missed to release child entries in the hierarchy tree (hroot_{in,out}). It needs to iterate the child entries and call hist_entry__delete() recursively. After this change: $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 0 Reported-by: Ian Rogers <irogers@google.com> Tested-by Thomas Falcon <thomas.falcon@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250307061250.320849-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The env.pmu_mapping can be leaked when it reads data from a pipe on AMD. For a pipe data, it reads the header data including pmu_mapping from PERF_RECORD_HEADER_FEATURE runtime. But it's already set in: perf_session__new() __perf_session__new() evlist__init_trace_event_sample_raw() evlist__has_amd_ibs() perf_env__nr_pmu_mappings() Then it'll overwrite that when it processes the HEADER_FEATURE record. Here's a report from address sanitizer. Direct leak of 2689 byte(s) in 1 object(s) allocated from: #0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98 #1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64 #2 0x5595a7d414ef in strbuf_init util/strbuf.c:25 #3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362 #4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517 #5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315 #6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23 #7 0x5595a7d7f893 in __perf_session__new util/session.c:179 #8 0x5595a7b79572 in perf_session__new util/session.h:115 #9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603 #10 0x5595a7c019eb in run_builtin perf.c:351 #11 0x5595a7c01c92 in handle_internal_command perf.c:404 #12 0x5595a7c01deb in run_argv perf.c:448 #13 0x5595a7c02134 in main perf.c:556 #14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Let's free the existing pmu_mapping data if any. Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] #11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] #12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] #13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] #14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] #15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] #16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 #17 [ffff800084a2fe00] worker_thread at ffff8000401121cc #18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

As reported by CVE-2025-29481 [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory. Consider the situation below where: - prog_start = sec_start + symbol_offset <-- size_t overflow here - prog_end = prog_start + prog_size prog_start sec_start prog_end sec_end | | | | v v v v .....................|################################|............ The CVE report in [1] also provides a corrupted BPF ELF which can be used as a reproducer: $ readelf -S crash Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040 0000000000000068 0000000000000000 AX 0 0 8 $ readelf -s crash Symbol table '.symtab' contains 8 entries: Num: Value Size Type Bind Vis Ndx Name ... 6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated. This is also reported by AddressSanitizer: ================================================================= ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490 READ of size 104 at 0x7c7302fe0000 thread T0 #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76) #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856 #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928 #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930 #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067 #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090 #6 0x000000400c16 in main /poc/poc.c:8 #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4) #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667) #9 0x000000400b34 in _start (/poc/poc+0x400b34) 0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8) allocated by thread T0 here: #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b) #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600) #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018) #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740 The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check `while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was removed by commit 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions"). Put the above condition back to bpf_object__init_prog to make sure that the program start is also within the bounds of the section to avoid the potential buffer overflow. [1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Reported-by: lmarch2 <2524158037@qq.com> Cc: stable@vger.kernel.org Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions") Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Link: https://www.cve.org/CVERecord?id=CVE-2025-29481 Signed-off-by: Viktor Malik <vmalik@redhat.com> Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>

As shown in [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory. Consider the situation below where: - prog_start = sec_start + symbol_offset <-- size_t overflow here - prog_end = prog_start + prog_size prog_start sec_start prog_end sec_end | | | | v v v v .....................|################################|............ The report in [1] also provides a corrupted BPF ELF which can be used as a reproducer: $ readelf -S crash Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040 0000000000000068 0000000000000000 AX 0 0 8 $ readelf -s crash Symbol table '.symtab' contains 8 entries: Num: Value Size Type Bind Vis Ndx Name ... 6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated. This is also reported by AddressSanitizer: ================================================================= ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490 READ of size 104 at 0x7c7302fe0000 thread T0 #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76) #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856 #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928 #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930 #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067 #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090 #6 0x000000400c16 in main /poc/poc.c:8 #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4) #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667) #9 0x000000400b34 in _start (/poc/poc+0x400b34) 0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8) allocated by thread T0 here: #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b) #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600) #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018) #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740 The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check `while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was removed by commit 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions"). Add a check for detecting the overflow of `sec_off + prog_sz` to bpf_object__init_prog to fix this issue. [1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Reported-by: lmarch2 <2524158037@qq.com> Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions") Signed-off-by: Viktor Malik <vmalik@redhat.com> Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>

As shown in [1], it is possible to corrupt a BPF ELF file such that arbitrary BPF instructions are loaded by libbpf. This can be done by setting a symbol (BPF program) section offset to a large (unsigned) number such that <section start + symbol offset> overflows and points before the section data in the memory. Consider the situation below where: - prog_start = sec_start + symbol_offset <-- size_t overflow here - prog_end = prog_start + prog_size prog_start sec_start prog_end sec_end | | | | v v v v .....................|################################|............ The report in [1] also provides a corrupted BPF ELF which can be used as a reproducer: $ readelf -S crash Section Headers: [Nr] Name Type Address Offset Size EntSize Flags Link Info Align ... [ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040 0000000000000068 0000000000000000 AX 0 0 8 $ readelf -s crash Symbol table '.symtab' contains 8 entries: Num: Value Size Type Bind Vis Ndx Name ... 6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will point before the actual memory where section 2 is allocated. This is also reported by AddressSanitizer: ================================================================= ==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490 READ of size 104 at 0x7c7302fe0000 thread T0 #0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76) #1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856 #2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928 #3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930 #4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067 #5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090 #6 0x000000400c16 in main /poc/poc.c:8 #7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4) #8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667) #9 0x000000400b34 in _start (/poc/poc+0x400b34) 0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8) allocated by thread T0 here: #0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b) #1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600) #2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018) #3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740 The problem here is that currently, libbpf only checks that the program end is within the section bounds. There used to be a check `while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was removed by commit 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions"). Add a check for detecting the overflow of `sec_off + prog_sz` to bpf_object__init_prog to fix this issue. [1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Fixes: 6245947 ("libbpf: Allow gaps in BPF program sections to support overriden weak functions") Reported-by: lmarch2 <2524158037@qq.com> Signed-off-by: Viktor Malik <vmalik@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com

Ido Schimmel says: ==================== vxlan: Convert FDB table to rhashtable The VXLAN driver currently stores FDB entries in a hash table with a fixed number of buckets (256), resulting in reduced performance as the number of entries grows. This patchset solves the issue by converting the driver to use rhashtable which maintains a more or less constant performance regardless of the number of entries. Measured transmitted packets per second using a single pktgen thread with varying number of entries when the transmitted packet always hits the default entry (worst case): Number of entries | Improvement ------------------|------------ 1k | +1.12% 4k | +9.22% 16k | +55% 64k | +585% 256k | +2460% The first patches are preparations for the conversion in the last patch. Specifically, the series is structured as follows: Patch #1 adds RCU read-side critical sections in the Tx path when accessing FDB entries. Targeting at net-next as I am not aware of any issues due to this omission despite the code being structured that way for a long time. Without it, traces will be generated when converting FDB lookup to rhashtable_lookup(). Patch #2-#5 simplify the creation of the default FDB entry (all-zeroes). Current code assumes that insertion into the hash table cannot fail, which will no longer be true with rhashtable. Patches #6-#10 add FDB entries to a linked list for entry traversal instead of traversing over them using the fixed size hash table which is removed in the last patch. Patches #11-#12 add wrappers for FDB lookup that make it clear when each should be used along with lockdep annotations. Needed as a preparation for rhashtable_lookup() that must be called from an RCU read-side critical section. Patch #13 treats dst cache initialization errors as non-fatal. See more info in the commit message. The current code happens to work because insertion into the fixed size hash table is slow enough for the per-CPU allocator to be able to create new chunks of per-CPU memory. Patch #14 adds an FDB key structure that includes the MAC address and source VNI. To be used as rhashtable key. Patch #15 does the conversion to rhashtable. ==================== Link: https://patch.msgid.link/20250415121143.345227-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

kernel-patches-bot added bpf-next new V1 labels Feb 15, 2022

adding ci files

a8692fb

kernel-patches-bot force-pushed the series/613583=>bpf-next branch from 8dcc628 to a8692fb Compare February 15, 2022 18:09

kernel-patches-bot added accepted and removed new labels Feb 15, 2022

kernel-patches-bot closed this Feb 15, 2022

kernel-patches-bot deleted the series/613583=>bpf-next branch February 15, 2022 18:14

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

selftests/bpf: fix GCC11 compiler warnings in -O2 mode #5

selftests/bpf: fix GCC11 compiler warnings in -O2 mode #5

kernel-patches-bot commented Feb 15, 2022

kernel-patches-bot commented Feb 15, 2022

kernel-patches-bot commented Feb 15, 2022

kernel-patches-bot commented Feb 15, 2022

selftests/bpf: fix GCC11 compiler warnings in -O2 mode #5

selftests/bpf: fix GCC11 compiler warnings in -O2 mode #5

Conversation

kernel-patches-bot commented Feb 15, 2022

kernel-patches-bot commented Feb 15, 2022

kernel-patches-bot commented Feb 15, 2022

kernel-patches-bot commented Feb 15, 2022