Zstd negative level #7

qiangzhao · 2022-10-04T17:11:14Z

No description provided.

The firmware for the Lenovo Thinkpad X13s has been submitted, accepted and merged upstream, so update to the correct path. Signed-off-by: Steev Klimaszewski <steev@kali.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220817231236.3971-1-steev@kali.org

Move the USB-controller wakeup-source property to the dwc3 glue node to match the updated binding. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220802152642.2516-1-johan+linaro@kernel.org

Update the email address for Bjorn's maintainer entries and fill in .mailmap accordingly. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20220819142549.1605081-1-bjorn.andersson@linaro.org

On i.MX7/iMX8MM/iMX8MQ, the initialized default value of PERST bit(BIT3) of SRC_PCIEPHY_RCR is 1b'1. But i.MX8MP has one inversed default value 1b'0 of PERST bit. And the PERST bit should be kept 1b'1 after power and clocks are stable. So fix the i.MX8MP PCIe PHY PERST support here. Fixes: e08672c ("reset: imx7: Add support for i.MX8MP SoC") Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Marek Vasut <marex@denx.de> Tested-by: Richard Leitner <richard.leitner@skidata.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/1661845564-11373-5-git-send-email-hongxing.zhu@nxp.com

Originally this was used in by the switch core driver to issue a reset. But it turns out, this isn't just a switch core reset but instead it will reset almost the complete SoC. Instead of adding almost all devices of the SoC a shared reset line, issue the reset once early on startup. Keep the reset controller for backwards compatibility, but make the actual reset a noop. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Steen Hegelund <Steen.Hegelund@microchip.com> on Sparx5 Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220826115607.1148489-2-michael@walle.cc

The Quanta 0408:4034 camera implements UVC 1.5, and thus sets bInterfaceProtocol to UVC_PC_PROTOCOL_15. Commit 95f03d9 ("media: uvcvideo: Limit power line control for Quanta cameras") added a quirk for the device that incorrectly specified the UVC 1.0 protocol, rendering the quirk inoperative. Fix it. Link: https://lore.kernel.org/linux-media/20220822131754.102393-1-ribalda@chromium.org Fixes: 95f03d9 ("media: uvcvideo: Limit power line control for Quanta cameras") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Add model numbers for client and mobile parts. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220824175718.232384-1-tony.luck@intel.com

Access to registers is guarded by ingenic_tcu_{enable,disable}_regs() so the stop bit can be cleared before accessing a timer channel, but those functions did not clear the stop bit on SoCs with a global TCU clock gate. Testing on the X1000 has revealed that the stop bits must be cleared _and_ the global TCU clock must be ungated to access timer registers. This appears to be the norm on Ingenic SoCs, and is specified in the documentation for the X1000 and numerous JZ47xx SoCs. If the stop bit isn't cleared, register writes don't take effect and the system can be left in a broken state, eg. the watchdog timer may not run. The bug probably went unnoticed because stop bits are zeroed when the SoC is reset, and the kernel does not set them unless a timer gets disabled at runtime. However, it is possible that a bootloader or a previous kernel (if using kexec) leaves the stop bits set and we should not rely on them being cleared. Fixing this is easy: have ingenic_tcu_{enable,disable}_regs() always clear the stop bit, regardless of the presence of a global TCU gate. Reviewed-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Paul Cercueil <paul@crapouillou.net> Fixes: 4f89e4b ("clk: ingenic: Add driver for the TCU clocks") Cc: stable@vger.kernel.org Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220617122254.738900-1-aidanmacdonald.0x0@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>

For some Alder Lake N machine, the below unchecked MSR access error may be triggered. [ 0.088017] rcu: Hierarchical SRCU implementation. [ 0.088017] unchecked MSR access error: WRMSR to 0x38f (tried to write 0x0001000f0000003f) at rIP: 0xffffffffb5684de8 (native_write_msr+0x8/0x30) [ 0.088017] Call Trace: [ 0.088017] <TASK> [ 0.088017] __intel_pmu_enable_all.constprop.46+0x4a/0xa0 The Alder Lake N only has e-cores. The X86_FEATURE_HYBRID_CPU flag is not set. The perf cannot retrieve the correct CPU type via get_this_hybrid_cpu_type(). The model specific get_hybrid_cpu_type() is hardcode to p-core. The wrong CPU type is given to the PMU of the Alder Lake N. Since Alder Lake N isn't in fact a hybrid CPU, remove ALDERLAKE_N from the rest of {ALDER,RAPTOP}LAKE and create a non-hybrid PMU setup. The differences between Gracemont and the previous Tremont are, - Number of GP counters - Load and store latency Events - PEBS event_constraints - Instruction Latency support - Data source encoding - Memory access latency encoding Fixes: c2a960f ("perf/x86: Add new Alder Lake and Raptor Lake support") Reported-by: Jianfeng Gao <jianfeng.gao@intel.com> Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220831142702.153110-1-kan.liang@linux.intel.com

When a guest PEBS counter is cross-mapped by a host counter, software will remove the corresponding bit in the arr[global_ctrl].guest and expect hardware to perform a change of state "from enable to disable" via the msr_slot[] switch during the vmx transaction. The real world is that if user adjust the counter overflow value small enough, it still opens a tiny race window for the previously PEBS-enabled counter to write cross-mapped PEBS records into the guest's PEBS buffer, when arr[global_ctrl].guest has been prioritised (switch_msr_special stuff) to switch into the enabled state, while the arr[pebs_enable].guest has not. Close this window by clearing invalid bits in the arr[global_ctrl].guest. Fixes: 8542503 ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations") Signed-off-by: Like Xu <likexu@tencent.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220831033524.58561-1-likexu@tencent.com

Commit bcbb63b ("ARM: dts: dra7: Separate AM57 dtsi files") disabled usb4_tm for am5748 devices since USB4 IP is not present in this SoC. The commit log explained the difference between AM5 and DRA7 families: AM5 and DRA7 SoC families have different set of modules in them so the SoC sepecific dtsi files need to be separated. e.g. Some of the major differences between AM576 and DRA76 DRA76x AM576x USB3 x USB4 x ATL x VCP x MLB x ISS x PRU-ICSS1 x PRU-ICSS2 x Then commit 176f26b ("ARM: dts: Add support for dra762 abz package") removed usb4_tm part from am5748.dtsi and introcuded new ti-sysc errors in dmesg: ti-sysc 48940000.target-module: clock get error for fck: -2 ti-sysc: probe of 48940000.target-module failed with error -2 Fixes: 176f26b ("ARM: dts: Add support for dra762 abz package") Signed-off-by: Romain Naour <romain.naour@skf.com> Signed-off-by: Romain Naour <romain.naour@smile.fr> Message-Id: <20220823072742.351368-1-romain.naour@smile.fr> Reviewed-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>

perf_output_read_group may respond to IPI request of other cores and invoke __perf_install_in_context function. As a result, hwc configuration is modified. causing inconsistency and unexpected consequences. Interrupts are not disabled when perf_output_read_group reads PMU counter. In this case, IPI request may be received from other cores. As a result, PMU configuration is modified and an error occurs when reading PMU counter: CPU0 CPU1 __se_sys_perf_event_open perf_install_in_context perf_output_read_group smp_call_function_single for_each_sibling_event(sub, leader) { generic_exec_single if ((sub != event) && remote_function (sub->state == PERF_EVENT_STATE_ACTIVE)) | <enter IPI handler: __perf_install_in_context> <----RAISE IPI-----+ __perf_install_in_context ctx_resched event_sched_out armpmu_del ... hwc->idx = -1; // event->hwc.idx is set to -1 ... <exit IPI> sub->pmu->read(sub); armpmu_read armv8pmu_read_counter armv8pmu_read_hw_counter int idx = event->hw.idx; // idx = -1 u64 val = armv8pmu_read_evcntr(idx); u32 counter = ARMV8_IDX_TO_COUNTER(idx); // invalid counter = 30 read_pmevcntrn(counter) // undefined instruction Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220902082918.179248-1-yangjihong1@huawei.com

sunxi_sram_claim() checks the sram_desc->claimed flag before updating the register, with the intent that only one device can claim a region. However, this was ineffective because the flag was never set. Fixes: 4af34b5 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220815041248.53268-4-samuel@sholland.org

This driver exports a regmap tied to the platform device (as opposed to a syscon, which exports a regmap tied to the OF node). Because of this, the driver can never be unbound, as that would destroy the regmap. Use builtin_platform_driver_probe() to enforce this limitation. Fixes: 5828729 ("soc: sunxi: export a regmap for EMAC clock reg on A64") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220815041248.53268-5-samuel@sholland.org

…ksgxd Unsanitized pages trigger WARN_ON() unconditionally, which can panic the whole computer, if /proc/sys/kernel/panic_on_warn is set. In sgx_init(), if misc_register() fails or misc_register() succeeds but neither sgx_drv_init() nor sgx_vepc_init() succeeds, then ksgxd will be prematurely stopped. This may leave unsanitized pages, which will result a false warning. Refine __sgx_sanitize_pages() to return: 1. Zero when the sanitization process is complete or ksgxd has been requested to stop. 2. The number of unsanitized pages otherwise. Fixes: 51ab30e ("x86/sgx: Replace section->init_laundry_list with sgx_dirty_page_list") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-sgx/20220825051827.246698-1-jarkko@kernel.org/T/#u Link: https://lkml.kernel.org/r/20220906000221.34286-2-jarkko@kernel.org

Errors from debugfs are intended to be non-fatal, and should not prevent the driver from probing. Since debugfs file creation is treated as infallible, move it below the parts of the probe function that can fail. This prevents an error elsewhere in the probe function from causing the file to leak. Do the same for the call to of_platform_populate(). Finally, checkpatch suggests an octal literal for the file permissions. Fixes: 4af34b5 ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs") Fixes: 5828729 ("soc: sunxi: export a regmap for EMAC clock reg on A64") Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220815041248.53268-6-samuel@sholland.org

VM_FAULT_NOPAGE is expected behaviour for -EBUSY failure path, when augmenting a page, as this means that the reclaimer thread has been triggered, and the intention is just to round-trip in ring-3, and retry with a new page fault. Fixes: 5a90d2c ("x86/sgx: Support adding of pages to an initialized enclave") Signed-off-by: Haitao Huang <haitao.huang@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Vijay Dhanraj <vijay.dhanraj@intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220906000221.34286-3-jarkko@kernel.org

The labels were backward with respect to the register values. The SRAM is mapped to the CPU when the register value is 1. Fixes: 5e4fb64 ("drivers: soc: sunxi: add support for A64 and its SRAM C") Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220815041248.53268-7-samuel@sholland.org

Syzkaller reported BUG_ON as follows: ------------[ cut here ]------------ kernel BUG at fs/ntfs/dir.c:86! invalid opcode: 0000 [kdave#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 758 Comm: a.out Not tainted 5.19.0-next-20220808 kdave#5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:ntfs_lookup_inode_by_name+0xd11/0x2d10 Code: ff e9 b9 01 00 00 e8 1e fe d6 fe 48 8b 7d 98 49 8d 5d 07 e8 91 85 29 ff 48 c7 45 98 00 00 00 00 e9 5a fb ff ff e8 ff fd d6 fe <0f> 0b e8 f8 fd d6 fe 0f 0b e8 f1 fd d6 fe 48 8b b5 50 ff ff ff 4c RSP: 0018:ffff888079607978 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000008000 RCX: 0000000000000000 RDX: ffff88807cf10000 RSI: ffffffff82a4a081 RDI: 0000000000000003 RBP: ffff888079607a70 R08: 0000000000000001 R09: ffff88807a6d01d7 R10: ffffed100f4da03a R11: 0000000000000000 R12: ffff88800f0fb110 R13: ffff88800f0ee000 R14: ffff88800f0fb000 R15: 0000000000000001 FS: 00007f33b63c7540(0000) GS:ffff888108580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f33b635c090 CR3: 000000000f39e005 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> load_system_files+0x1f7f/0x3620 ntfs_fill_super+0xa01/0x1be0 mount_bdev+0x36a/0x440 ntfs_mount+0x3a/0x50 legacy_get_tree+0xfb/0x210 vfs_get_tree+0x8f/0x2f0 do_new_mount+0x30a/0x760 path_mount+0x4de/0x1880 __x64_sys_mount+0x2b3/0x340 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f33b62ff9ea Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffd0c471aa8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f33b62ff9ea RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffd0c471be0 RBP: 00007ffd0c471c60 R08: 00007ffd0c471ae0 R09: 00007ffd0c471c24 R10: 0000000000000000 R11: 0000000000000202 R12: 000055bac5afc160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- Fix this by adding sanity check on extended system files' directory inode to ensure that it is directory, just like ntfs_extend_init() when mounting ntfs3. Link: https://lkml.kernel.org/r/20220809064730.2316892-1-chenxiaosong2@huawei.com Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…e allocation Patrick Daly reported the following problem; NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - before offline operation [0] - ZONE_MOVABLE [1] - ZONE_NORMAL [2] - NULL For a GFP_KERNEL allocation, alloc_pages_slowpath() will save the offset of ZONE_NORMAL in ac->preferred_zoneref. If a concurrent memory_offline operation removes the last page from ZONE_MOVABLE, build_all_zonelists() & build_zonerefs_node() will update node_zonelists as shown below. Only populated zones are added. NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - after offline operation [0] - ZONE_NORMAL [1] - NULL [2] - NULL The race is simple -- page allocation could be in progress when a memory hot-remove operation triggers a zonelist rebuild that removes zones. The allocation request will still have a valid ac->preferred_zoneref that is now pointing to NULL and triggers an OOM kill. This problem probably always existed but may be slightly easier to trigger due to 6aa303d ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") which distinguishes between zones that are completely unpopulated versus zones that have valid pages not managed by the buddy allocator (e.g. reserved, memblock, ballooning etc). Memory hotplug had multiple stages with timing considerations around managed/present page updates, the zonelist rebuild and the zone span updates. As David Hildenbrand puts it memory offlining adjusts managed+present pages of the zone essentially in one go. If after the adjustments, the zone is no longer populated (present==0), we rebuild the zone lists. Once that's done, we try shrinking the zone (start+spanned pages) -- which results in zone_start_pfn == 0 if there are no more pages. That happens *after* rebuilding the zonelists via remove_pfn_range_from_zone(). The only requirement to fix the race is that a page allocation request identifies when a zonelist rebuild has happened since the allocation request started and no page has yet been allocated. Use a seqlock_t to track zonelist updates with a lockless read-side of the zonelist and protecting the rebuild and update of the counter with a spinlock. [akpm@linux-foundation.org: make zonelist_update_seq static] Link: https://lkml.kernel.org/r/20220824110900.vh674ltxmzb3proq@techsingularity.net Fixes: 6aa303d ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: Patrick Daly <quic_pdaly@quicinc.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "mm, xfs, dax: Fixes for memory_failure() handling". I failed to run the memory error injection section of the ndctl test suite on linux-next prior to the merge window and as a result some bugs were missed. While the new enabling targeted reflink enabled XFS filesystems the bugs cropped up in the surrounding cases of DAX error injection on ext4-fsdax and device-dax. One new assumption / clarification in this set is the notion that if a filesystem's ->notify_failure() handler returns -EOPNOTSUPP, then it must be the case that the fsdax usage of page->index and page->mapping are valid. I am fairly certain this is true for xfs_dax_notify_failure(), but would appreciate another set of eyes. This patch (of 4): XFS always registers dax_holder_operations regardless of whether the filesystem is capable of handling the notifications. The expectation is that if the notify_failure handler cannot run then there are no scenarios where it needs to run. In other words the expected semantic is that page->index and page->mapping are valid for memory_failure() when the conditions that cause -EOPNOTSUPP in xfs_dax_notify_failure() are present. A fallback to the generic memory_failure() path is expected so do not warn when that happens. Link: https://lkml.kernel.org/r/166153426798.2758201.15108211981034512993.stgit@dwillia2-xfh.jf.intel.com Link: https://lkml.kernel.org/r/166153427440.2758201.6709480562966161512.stgit@dwillia2-xfh.jf.intel.com Fixes: 6f643c5 ("xfs: implement ->notify_failure() for XFS") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Jane Chu <jane.chu@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The SB_BORN flag is stored in the vfs superblock, not xfs_sb. Link: https://lkml.kernel.org/r/166153428094.2758201.7936572520826540019.stgit@dwillia2-xfh.jf.intel.com Fixes: 6f643c5 ("xfs: implement ->notify_failure() for XFS") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Jane Chu <jane.chu@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Some pagemap types, like MEMORY_DEVICE_GENERIC (device-dax) do not even have pagemap ops which results in crash signatures like this: BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000205073067 P4D 8000000205073067 PUD 2062b3067 PMD 0 Oops: 0000 [kdave#1] PREEMPT SMP PTI CPU: 22 PID: 4535 Comm: device-dax Tainted: G OE N 6.0.0-rc2+ torvalds#59 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:memory_failure+0x667/0xba0 [..] Call Trace: <TASK> ? _printk+0x58/0x73 do_madvise.part.0.cold+0xaf/0xc5 Check for ops before checking if the ops have a memory_failure() handler. Link: https://lkml.kernel.org/r/166153428781.2758201.1990616683438224741.stgit@dwillia2-xfh.jf.intel.com Fixes: 33a8f7f ("pagemap,pmem: introduce ->memory_failure()") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Jane Chu <jane.chu@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

… fails In the case where a filesystem is polled to take over the memory failure and receives -EOPNOTSUPP it indicates that page->index and page->mapping are valid for reverse mapping the failure address. Introduce FSDAX_INVALID_PGOFF to distinguish when add_to_kill() is being called from mf_dax_kill_procs() by a filesytem vs the typical memory_failure() path. Otherwise, vma_pgoff_address() is called with an invalid fsdax_pgoff which then trips this failing signature: kernel BUG at mm/memory-failure.c:319! invalid opcode: 0000 [kdave#1] PREEMPT SMP PTI CPU: 13 PID: 1262 Comm: dax-pmd Tainted: G OE N 6.0.0-rc2+ torvalds#62 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:add_to_kill.cold+0x19d/0x209 [..] Call Trace: <TASK> collect_procs.part.0+0x2c4/0x460 memory_failure+0x71b/0xba0 ? _printk+0x58/0x73 do_madvise.part.0.cold+0xaf/0xc5 Link: https://lkml.kernel.org/r/166153429427.2758201.14605968329933175594.stgit@dwillia2-xfh.jf.intel.com Fixes: c36e202 ("mm: introduce mf_dax_kill_procs() for fsdax case") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Cc: Goldwyn Rodrigues <rgoldwyn@suse.de> Cc: Jane Chu <jane.chu@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Ritesh Harjani <riteshh@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Commit 4867fbb ("x86/mm: move protection_map[] inside the platform") moved accesses to protection_map[] from mem_encrypt_amd.c to pgprot.c. As a result, the accesses are now targets of KASAN (and other instrumentations), leading to the crash during the boot process. Disable the instrumentations for pgprot.c like commit 67bb8e9 ("x86/mm: Disable various instrumentations of mm/mem_encrypt.c and mm/tlb.c"). Before this patch, my AMD machine cannot boot since v6.0-rc1 with KASAN enabled, without anything printed. After the change, it successfully boots up. Fixes: 4867fbb ("x86/mm: move protection_map[] inside the platform") Link: https://lkml.kernel.org/r/20220824084726.2174758-1-naohiro.aota@wdc.com Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When clearing a PTE the TLB should be flushed whilst still holding the PTL to avoid a potential race with madvise/munmap/etc. For example consider the following sequence: CPU0 CPU1 ---- ---- migrate_vma_collect_pmd() pte_unmap_unlock() madvise(MADV_DONTNEED) -> zap_pte_range() pte_offset_map_lock() [ PTE not present, TLB not flushed ] pte_unmap_unlock() [ page is still accessible via stale TLB ] flush_tlb_range() In this case the page may still be accessed via the stale TLB entry after madvise returns. Fix this by flushing the TLB while holding the PTL. Fixes: 8c3328f ("mm/migrate: migrate_vma() unmap page from vma while collecting pages") Link: https://lkml.kernel.org/r/9f801e9d8d830408f2ca27821f606e09aa856899.1662078528.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Reported-by: Nadav Amit <nadav.amit@gmail.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: huang ying <huang.ying.caritas@gmail.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Currently we only call flush_cache_page() for the anon_exclusive case, however in both cases we clear the pte so should flush the cache. Link: https://lkml.kernel.org/r/5676f30436ab71d1a587ac73f835ed8bd2113ff5.1662078528.git-series.apopple@nvidia.com Fixes: 8c3328f ("mm/migrate: migrate_vma() unmap page from vma while collecting pages") Signed-off-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: huang ying <huang.ying.caritas@gmail.com> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

migrate_vma_setup() has a fast path in migrate_vma_collect_pmd() that installs migration entries directly if it can lock the migrating page. When removing a dirty pte the dirty bit is supposed to be carried over to the underlying page to prevent it being lost. Currently migrate_vma_*() can only be used for private anonymous mappings. That means loss of the dirty bit usually doesn't result in data loss because these pages are typically not file-backed. However pages may be backed by swap storage which can result in data loss if an attempt is made to migrate a dirty page that doesn't yet have the PageDirty flag set. In this case migration will fail due to unexpected references but the dirty pte bit will be lost. If the page is subsequently reclaimed data won't be written back to swap storage as it is considered uptodate, resulting in data loss if the page is subsequently accessed. Prevent this by copying the dirty bit to the page when removing the pte to match what try_to_migrate_one() does. Link: https://lkml.kernel.org/r/dd48e4882ce859c295c1a77612f66d198b0403f9.1662078528.git-series.apopple@nvidia.com Fixes: 8c3328f ("mm/migrate: migrate_vma() unmap page from vma while collecting pages") Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alex Sierra <alex.sierra@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: huang ying <huang.ying.caritas@gmail.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Karol Herbst <kherbst@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). Link: https://lkml.kernel.org/r/20220902191149.112434-1-sj@kernel.org Fixes: 75c1c2b ("mm/damon/dbgfs: support multiple contexts") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip torvalds#330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <chao.gao@intel.com> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Tested-by: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240830043600.127750-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn> Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

…ation When testing the XDP_REDIRECT function on the LS1028A platform, we found a very reproducible issue that the Tx frames can no longer be sent out even if XDP_REDIRECT is turned off. Specifically, if there is a lot of traffic on Rx direction, when XDP_REDIRECT is turned on, the console may display some warnings like "timeout for tx ring #6 clear", and all redirected frames will be dropped, the detailed log is as follows. root@ls1028ardb:~# ./xdp-bench redirect eno0 eno2 Redirecting from eno0 (ifindex 3; driver fsl_enetc) to eno2 (ifindex 4; driver fsl_enetc) [203.849809] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #5 clear [204.006051] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear [204.161944] fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear eno0->eno2 1420505 rx/s 1420590 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420590 drop/s 0 drv_err/s 15.71 bulk-avg eno0->eno2 1420484 rx/s 1420485 err,drop/s 0 xmit/s xmit eno0->eno2 0 xmit/s 1420485 drop/s 0 drv_err/s 15.71 bulk-avg By analyzing the XDP_REDIRECT implementation of enetc driver, the driver will reconfigure Tx and Rx BD rings when a bpf program is installed or uninstalled, but there is no mechanisms to block the redirected frames when enetc driver reconfigures rings. Similarly, XDP_TX verdicts on received frames can also lead to frames being enqueued in the Tx rings. Because XDP ignores the state set by the netif_tx_wake_queue() API, so introduce the ENETC_TX_DOWN flag to suppress transmission of XDP frames. Fixes: c33bfaf ("net: enetc: set up XDP program under enetc_reconfigure()") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The Tx BD rings are disabled first in enetc_stop() and the driver waits for them to become empty. This operation is not safe while the ring is actively transmitting frames, and will cause the ring to not be empty and hardware exception. As described in the NETC block guide, software should only disable an active Tx ring after all pending ring entries have been consumed (i.e. when PI = CI). Disabling a transmit ring that is actively processing BDs risks a HW-SW race hazard whereby a hardware resource becomes assigned to work on one or more ring entries only to have those entries be removed due to the ring becoming disabled. When testing XDP_REDIRECT feautre, although all frames were blocked from being put into Tx rings during ring reconfiguration, the similar warning log was still encountered: fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #6 clear fsl_enetc 0000:00:00.2 eno2: timeout for tx ring #7 clear The reason is that when there are still unsent frames in the Tx ring, disabling the Tx ring causes the remaining frames to be unable to be sent out. And the Tx ring cannot be restored, which means that even if the xdp program is uninstalled, the Tx frames cannot be sent out anymore. Therefore, correct the operation order in enect_start() and enect_stop(). Fixes: ff58fda ("net: enetc: prioritize ability to go down over packet processing") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20241010092056.298128-4-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Patch series "Improve the copy of task comm", v8. Using {memcpy,strncpy,strcpy,kstrdup} to copy the task comm relies on the length of task comm. Changes in the task comm could result in a destination string that is overflow. Therefore, we should explicitly ensure the destination string is always NUL-terminated, regardless of the task comm. This approach will facilitate future extensions to the task comm. As suggested by Linus [0], we can identify all relevant code with the following git grep command: git grep 'memcpy.*->comm\>' git grep 'kstrdup.*->comm\>' git grep 'strncpy.*->comm\>' git grep 'strcpy.*->comm\>' PATCH #2~#4: memcpy PATCH #5~#6: kstrdup PATCH #7: strcpy Please note that strncpy() is not included in this series as it is being tracked by another effort. [1] This patch (of 7): We want to eliminate the use of __get_task_comm() for the following reasons: - The task_lock() is unnecessary Quoted from Linus [0]: : Since user space can randomly change their names anyway, using locking : was always wrong for readers (for writers it probably does make sense : to have some lock - although practically speaking nobody cares there : either, but at least for a writer some kind of race could have : long-term mixed results Link: https://lkml.kernel.org/r/20241007144911.27693-1-laoar.shao@gmail.com Link: https://lkml.kernel.org/r/20241007144911.27693-2-laoar.shao@gmail.com Link: https://lore.kernel.org/all/CAHk-=wivfrF0_zvf+oj6==Sh=-npJooP8chLPEfaFV0oNYTTBA@mail.gmail.com [0] Link: https://lore.kernel.org/all/CAHk-=whWtUC-AjmGJveAETKOMeMFSTwKwu99v7+b6AyHMmaDFA@mail.gmail.com/ Link: https://lore.kernel.org/all/CAHk-=wjAmmHUg6vho1KjzQi2=psR30+CogFd4aXrThr2gsiS4g@mail.gmail.com/ [0] Link: KSPP#90 [1] Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Matus Jokay <matus.jokay@stuba.sk> Cc: Alejandro Colomar <alx@kernel.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: James Morris <jmorris@namei.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Ondrej Mosnacek <omosnace@redhat.com> Cc: Paul Moore <paul@paul-moore.com> Cc: Quentin Monnet <qmo@kernel.org> Cc: Simon Horman <horms@kernel.org> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

BUG: KASAN: slab-use-after-free in tcp_write_timer_handler+0x156/0x3e0 Read of size 1 at addr ffff888111f322cd by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.12.0-rc4-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 Call Trace: <IRQ> dump_stack_lvl+0x68/0xa0 print_address_description.constprop.0+0x2c/0x3d0 print_report+0xb4/0x270 kasan_report+0xbd/0xf0 tcp_write_timer_handler+0x156/0x3e0 tcp_write_timer+0x66/0x170 call_timer_fn+0xfb/0x1d0 __run_timers+0x3f8/0x480 run_timer_softirq+0x9b/0x100 handle_softirqs+0x153/0x390 __irq_exit_rcu+0x103/0x120 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x76/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:default_idle+0xf/0x20 Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 33 f8 25 00 fb f4 <fa> c3 cc cc cc cc 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 RSP: 0018:ffffffffa2007e28 EFLAGS: 00000242 RAX: 00000000000f3b31 RBX: 1ffffffff4400fc7 RCX: ffffffffa09c3196 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff9f00590f RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed102360835d R10: ffff88811b041aeb R11: 0000000000000001 R12: 0000000000000000 R13: ffffffffa202d7c0 R14: 0000000000000000 R15: 00000000000147d0 default_idle_call+0x6b/0xa0 cpuidle_idle_call+0x1af/0x1f0 do_idle+0xbc/0x130 cpu_startup_entry+0x33/0x40 rest_init+0x11f/0x210 start_kernel+0x39a/0x420 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x97/0xa0 common_startup_64+0x13e/0x141 </TASK> Allocated by task 595: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x87/0x90 kmem_cache_alloc_noprof+0x12b/0x3f0 copy_net_ns+0x94/0x380 create_new_namespaces+0x24c/0x500 unshare_nsproxy_namespaces+0x75/0xf0 ksys_unshare+0x24e/0x4f0 __x64_sys_unshare+0x1f/0x30 do_syscall_64+0x70/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 100: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x54/0x70 kmem_cache_free+0x156/0x5d0 cleanup_net+0x5d3/0x670 process_one_work+0x776/0xa90 worker_thread+0x2e2/0x560 kthread+0x1a8/0x1f0 ret_from_fork+0x34/0x60 ret_from_fork_asm+0x1a/0x30 Reproduction script: mkdir -p /mnt/nfsshare mkdir -p /mnt/nfs/netns_1 mkfs.ext4 /dev/sdb mount /dev/sdb /mnt/nfsshare systemctl restart nfs-server chmod 777 /mnt/nfsshare exportfs -i -o rw,no_root_squash *:/mnt/nfsshare ip netns add netns_1 ip link add name veth_1_peer type veth peer veth_1 ifconfig veth_1_peer 11.11.0.254 up ip link set veth_1 netns netns_1 ip netns exec netns_1 ifconfig veth_1 11.11.0.1 ip netns exec netns_1 /root/iptables -A OUTPUT -d 11.11.0.254 -p tcp \ --tcp-flags FIN FIN -j DROP (note: In my environment, a DESTROY_CLIENTID operation is always sent immediately, breaking the nfs tcp connection.) ip netns exec netns_1 timeout -s 9 300 mount -t nfs -o proto=tcp,vers=4.1 \ 11.11.0.254:/mnt/nfsshare /mnt/nfs/netns_1 ip netns del netns_1 The reason here is that the tcp socket in netns_1 (nfs side) has been shutdown and closed (done in xs_destroy), but the FIN message (with ack) is discarded, and the nfsd side keeps sending retransmission messages. As a result, when the tcp sock in netns_1 processes the received message, it sends the message (FIN message) in the sending queue, and the tcp timer is re-established. When the network namespace is deleted, the net structure accessed by tcp's timer handler function causes problems. To fix this problem, let's hold netns refcnt for the tcp kernel socket as done in other modules. This is an ugly hack which can easily be backported to earlier kernels. A proper fix which cleans up the interfaces will follow, but may not be so easy to backport. Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Signed-off-by: Liu Jian <liujian56@huawei.com> Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

syzkaller reported a use-after-free of UDP kernel socket in cleanup_bearer() without repro. [0][1] When bearer_disable() calls tipc_udp_disable(), cleanup of the UDP kernel socket is deferred by work calling cleanup_bearer(). tipc_net_stop() waits for such works to finish by checking tipc_net(net)->wq_count. However, the work decrements the count too early before releasing the kernel socket, unblocking cleanup_net() and resulting in use-after-free. Let's move the decrement after releasing the socket in cleanup_bearer(). [0]: ref_tracker: net notrefcnt@000000009b3d1faf has 1/1 users at sk_alloc+0x438/0x608 inet_create+0x4c8/0xcb0 __sock_create+0x350/0x6b8 sock_create_kern+0x58/0x78 udp_sock_create4+0x68/0x398 udp_sock_create+0x88/0xc8 tipc_udp_enable+0x5e8/0x848 __tipc_nl_bearer_enable+0x84c/0xed8 tipc_nl_bearer_enable+0x38/0x60 genl_family_rcv_msg_doit+0x170/0x248 genl_rcv_msg+0x400/0x5b0 netlink_rcv_skb+0x1dc/0x398 genl_rcv+0x44/0x68 netlink_unicast+0x678/0x8b0 netlink_sendmsg+0x5e4/0x898 ____sys_sendmsg+0x500/0x830 [1]: BUG: KMSAN: use-after-free in udp_hashslot include/net/udp.h:85 [inline] BUG: KMSAN: use-after-free in udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 udp_hashslot include/net/udp.h:85 [inline] udp_lib_unhash+0x3b8/0x930 net/ipv4/udp.c:1979 sk_common_release+0xaf/0x3f0 net/core/sock.c:3820 inet_release+0x1e0/0x260 net/ipv4/af_inet.c:437 inet6_release+0x6f/0xd0 net/ipv6/af_inet6.c:489 __sock_release net/socket.c:658 [inline] sock_release+0xa0/0x210 net/socket.c:686 cleanup_bearer+0x42d/0x4c0 net/tipc/udp_media.c:819 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 Uninit was created at: slab_free_hook mm/slub.c:2269 [inline] slab_free mm/slub.c:4580 [inline] kmem_cache_free+0x207/0xc40 mm/slub.c:4682 net_free net/core/net_namespace.c:454 [inline] cleanup_net+0x16f2/0x19d0 net/core/net_namespace.c:647 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xcaf/0x1c90 kernel/workqueue.c:3310 worker_thread+0xf6c/0x1510 kernel/workqueue.c:3391 kthread+0x531/0x6b0 kernel/kthread.c:389 ret_from_fork+0x60/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:244 CPU: 0 UID: 0 PID: 54 Comm: kworker/0:2 Not tainted 6.12.0-rc1-00131-gf66ebf37d69c #7 91723d6f74857f70725e1583cba3cf4adc716cfa Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Workqueue: events cleanup_bearer Fixes: 26abe14 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241127050512.28438-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Kernel will hang on destroy admin_q while we create ctrl failed, such as following calltrace: PID: 23644 TASK: ff2d52b40f439fc0 CPU: 2 COMMAND: "nvme" #0 [ff61d23de260fb78] __schedule at ffffffff8323bc15 #1 [ff61d23de260fc08] schedule at ffffffff8323c014 #2 [ff61d23de260fc28] blk_mq_freeze_queue_wait at ffffffff82a3dba1 #3 [ff61d23de260fc78] blk_freeze_queue at ffffffff82a4113a #4 [ff61d23de260fc90] blk_cleanup_queue at ffffffff82a33006 #5 [ff61d23de260fcb0] nvme_rdma_destroy_admin_queue at ffffffffc12686ce #6 [ff61d23de260fcc8] nvme_rdma_setup_ctrl at ffffffffc1268ced #7 [ff61d23de260fd28] nvme_rdma_create_ctrl at ffffffffc126919b #8 [ff61d23de260fd68] nvmf_dev_write at ffffffffc024f362 #9 [ff61d23de260fe38] vfs_write at ffffffff827d5f25 RIP: 00007fda7891d574 RSP: 00007ffe2ef06958 RFLAGS: 00000202 RAX: ffffffffffffffda RBX: 000055e8122a4d90 RCX: 00007fda7891d574 RDX: 000000000000012b RSI: 000055e8122a4d90 RDI: 0000000000000004 RBP: 00007ffe2ef079c0 R8: 000000000000012b R9: 000055e8122a4d90 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000004 R13: 000055e8122923c0 R14: 000000000000012b R15: 00007fda78a54500 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b This due to we have quiesced admi_q before cancel requests, but forgot to unquiesce before destroy it, as a result we fail to drain the pending requests, and hang on blk_mq_freeze_queue_wait() forever. Here try to reuse nvme_rdma_teardown_admin_queue() to fix this issue and simplify the code. Fixes: 958dc1d ("nvme-rdma: add clean action for failed reconnection") Reported-by: Yingfu.zhou <yingfu.zhou@shopee.com> Signed-off-by: Chunguang.xu <chunguang.xu@shopee.com> Signed-off-by: Yue.zhao <yue.zhao@shopee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>

Hou Tao says: ==================== This patch set fixes several issues for LPM trie. These issues were found during adding new test cases or were reported by syzbot. The patch set is structured as follows: Patch #1~#2 are clean-ups for lpm_trie_update_elem(). Patch #3 handles BPF_EXIST and BPF_NOEXIST correctly for LPM trie. Patch #4 fixes the accounting of n_entries when doing in-place update. Patch #5 fixes the exact match condition in trie_get_next_key() and it may skip keys when the passed key is not found in the map. Patch #6~#7 switch from kmalloc() to bpf memory allocator for LPM trie to fix several lock order warnings reported by syzbot. It also enables raw_spinlock_t for LPM trie again. After these changes, the LPM trie will be closer to being usable in any context (though the reentrance check of trie->lock is still missing, but it is on my todo list). Patch #8: move test_lpm_map to map_tests to make it run regularly. Patch #9: add test cases for the issues fixed by patch #3~#5. Please see individual patches for more details. Comments are always welcome. Change Log: v3: * patch #2: remove the unnecessary NULL-init for im_node * patch #6: alloc the leaf node before disabling IRQ to low the possibility of -ENOMEM when leaf_size is large; Free these nodes outside the trie lock (Suggested by Alexei) * collect review and ack tags (Thanks for Toke & Daniel) v2: https://lore.kernel.org/bpf/20241127004641.1118269-1-houtao@huaweicloud.com/ * collect review tags (Thanks for Toke) * drop "Add bpf_mem_cache_is_mergeable() helper" patch * patch #3~#4: add fix tag * patch #4: rename the helper to trie_check_add_elem() and increase n_entries in it. * patch #6: use one bpf mem allocator and update commit message to clarify that using bpf mem allocator is more appropriate. * patch #7: update commit message to add the possible max running time for update operation. * patch #9: update commit message to specify the purpose of these test cases. v1: https://lore.kernel.org/bpf/20241118010808.2243555-1-houtao@huaweicloud.com/ ==================== Link: https://lore.kernel.org/all/20241206110622.1161752-1-houtao@huaweicloud.com/ Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The 5760X (P7) chip's HW GRO/LRO interface is very similar to that of the previous generation (5750X or P5). However, the aggregation ID fields in the completion structures on P7 have been redefined from 16 bits to 12 bits. The freed up 4 bits are redefined for part of the metadata such as the VLAN ID. The aggregation ID mask was not modified when adding support for P7 chips. Including the extra 4 bits for the aggregation ID can potentially cause the driver to store or fetch the packet header of GRO/LRO packets in the wrong TPA buffer. It may hit the BUG() condition in __skb_pull() because the SKB contains no valid packet header: kernel BUG at include/linux/skbuff.h:2766! Oops: invalid opcode: 0000 1 PREEMPT SMP NOPTI CPU: 4 UID: 0 PID: 0 Comm: swapper/4 Kdump: loaded Tainted: G OE 6.12.0-rc2+ #7 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. PowerEdge R760/0VRV9X, BIOS 1.0.1 12/27/2022 RIP: 0010:eth_type_trans+0xda/0x140 Code: 80 00 00 00 eb c1 8b 47 70 2b 47 74 48 8b 97 d0 00 00 00 83 f8 01 7e 1b 48 85 d2 74 06 66 83 3a ff 74 09 b8 00 04 00 00 eb a5 <0f> 0b b8 00 01 00 00 eb 9c 48 85 ff 74 eb 31 f6 b9 02 00 00 00 48 RSP: 0018:ff615003803fcc28 EFLAGS: 00010283 RAX: 00000000000022d2 RBX: 0000000000000003 RCX: ff2e8c25da334040 RDX: 0000000000000040 RSI: ff2e8c25c1ce8000 RDI: ff2e8c25869f9000 RBP: ff2e8c258c31c000 R08: ff2e8c25da334000 R09: 0000000000000001 R10: ff2e8c25da3342c0 R11: ff2e8c25c1ce89c0 R12: ff2e8c258e0990b0 R13: ff2e8c25bb120000 R14: ff2e8c25c1ce89c0 R15: ff2e8c25869f9000 FS: 0000000000000000(0000) GS:ff2e8c34be300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f05317e4c8 CR3: 000000108bac6006 CR4: 0000000000773ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? eth_type_trans+0xda/0x140 ? do_error_trap+0x65/0x80 ? eth_type_trans+0xda/0x140 ? exc_invalid_op+0x4e/0x70 ? eth_type_trans+0xda/0x140 ? asm_exc_invalid_op+0x16/0x20 ? eth_type_trans+0xda/0x140 bnxt_tpa_end+0x10b/0x6b0 [bnxt_en] ? bnxt_tpa_start+0x195/0x320 [bnxt_en] bnxt_rx_pkt+0x902/0xd90 [bnxt_en] ? __bnxt_tx_int.constprop.0+0x89/0x300 [bnxt_en] ? kmem_cache_free+0x343/0x440 ? __bnxt_tx_int.constprop.0+0x24f/0x300 [bnxt_en] __bnxt_poll_work+0x193/0x370 [bnxt_en] bnxt_poll_p5+0x9a/0x300 [bnxt_en] ? try_to_wake_up+0x209/0x670 __napi_poll+0x29/0x1b0 Fix it by redefining the aggregation ID mask for P5_PLUS chips to be 12 bits. This will work because the maximum aggregation ID is less than 4096 on all P5_PLUS chips. Fixes: 13d2d3d ("bnxt_en: Add new P7 hardware interface definitions") Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241209015448.1937766-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Its used from trace__run(), for the 'perf trace' live mode, i.e. its strace-like, non-perf.data file processing mode, the most common one. The trace__run() function will set trace->host using machine__new_host() that is supposed to give a machine instance representing the running machine, and since we'll use perf_env__arch_strerrno() to get the right errno -> string table, we need to use machine->env, so initialize it in machine__new_host(). Before the patch: (gdb) run trace --errno-summary -a sleep 1 <SNIP> Summary of events: gvfs-afc-volume (3187), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ pselect6 1 0 0.000 0.000 0.000 0.000 0.00% GUsbEventThread (3519), 2 events, 0.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 1 0 0.000 0.000 0.000 0.000 0.00% <SNIP> Program received signal SIGSEGV, Segmentation fault. 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 478 if (env->arch_strerrno == NULL) (gdb) bt #0 0x00000000005caba0 in perf_env__arch_strerrno (env=0x0, err=110) at util/env.c:478 #1 0x00000000004b75d2 in thread__dump_stats (ttrace=0x14f58f0, trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4673 #2 0x00000000004b78bf in trace__fprintf_thread (fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>, thread=0x10fa0b0, trace=0x7fffffffa5b0) at builtin-trace.c:4708 #3 0x00000000004b7ad9 in trace__fprintf_thread_summary (trace=0x7fffffffa5b0, fp=0x7ffff6ff74e0 <_IO_2_1_stderr_>) at builtin-trace.c:4747 #4 0x00000000004b656e in trace__run (trace=0x7fffffffa5b0, argc=2, argv=0x7fffffffde60) at builtin-trace.c:4456 #5 0x00000000004ba43e in cmd_trace (argc=2, argv=0x7fffffffde60) at builtin-trace.c:5487 #6 0x00000000004c0414 in run_builtin (p=0xec3068 <commands+648>, argc=5, argv=0x7fffffffde60) at perf.c:351 #7 0x00000000004c06bb in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:404 #8 0x00000000004c0814 in run_argv (argcp=0x7fffffffdc4c, argv=0x7fffffffdc40) at perf.c:448 #9 0x00000000004c0b5d in main (argc=5, argv=0x7fffffffde60) at perf.c:560 (gdb) After: root@number:~# perf trace -a --errno-summary sleep 1 <SNIP> pw-data-loop (2685), 1410 events, 16.0% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ epoll_wait 188 0 983.428 0.000 5.231 15.595 8.68% ioctl 94 0 0.811 0.004 0.009 0.016 2.82% read 188 0 0.322 0.001 0.002 0.006 5.15% write 141 0 0.280 0.001 0.002 0.018 8.39% timerfd_settime 94 0 0.138 0.001 0.001 0.007 6.47% gnome-control-c (179406), 1848 events, 20.9% syscall calls errors total min avg max stddev (msec) (msec) (msec) (msec) (%) --------------- -------- ------ -------- --------- --------- --------- ------ poll 222 0 959.577 0.000 4.322 21.414 11.40% recvmsg 150 0 0.539 0.001 0.004 0.013 5.12% write 300 0 0.442 0.001 0.001 0.007 3.29% read 150 0 0.183 0.001 0.001 0.009 5.53% getpid 102 0 0.101 0.000 0.001 0.008 7.82% root@number:~# Fixes: 54373b5 ("perf env: Introduce perf_env__arch_strerrno()") Reported-by: Veronika Molnarova <vmolnaro@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Veronika Molnarova <vmolnaro@redhat.com> Acked-by: Michael Petlan <mpetlan@redhat.com> Tested-by: Michael Petlan <mpetlan@redhat.com> Link: https://lore.kernel.org/r/Z0XffUgNSv_9OjOi@x1 Signed-off-by: Namhyung Kim <namhyung@kernel.org>

…le_direct_reclaim() The task sometimes continues looping in throttle_direct_reclaim() because allow_direct_reclaim(pgdat) keeps returning false. #0 [ffff80002cb6f8d0] __switch_to at ffff8000080095ac #1 [ffff80002cb6f900] __schedule at ffff800008abbd1c #2 [ffff80002cb6f990] schedule at ffff800008abc50c #3 [ffff80002cb6f9b0] throttle_direct_reclaim at ffff800008273550 #4 [ffff80002cb6fa20] try_to_free_pages at ffff800008277b68 #5 [ffff80002cb6fae0] __alloc_pages_nodemask at ffff8000082c4660 #6 [ffff80002cb6fc50] alloc_pages_vma at ffff8000082e4a98 #7 [ffff80002cb6fca0] do_anonymous_page at ffff80000829f5a8 #8 [ffff80002cb6fce0] __handle_mm_fault at ffff8000082a5974 #9 [ffff80002cb6fd90] handle_mm_fault at ffff8000082a5bd4 At this point, the pgdat contains the following two zones: NODE: 4 ZONE: 0 ADDR: ffff00817fffe540 NAME: "DMA32" SIZE: 20480 MIN/LOW/HIGH: 11/28/45 VM_STAT: NR_FREE_PAGES: 359 NR_ZONE_INACTIVE_ANON: 18813 NR_ZONE_ACTIVE_ANON: 0 NR_ZONE_INACTIVE_FILE: 50 NR_ZONE_ACTIVE_FILE: 0 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 NODE: 4 ZONE: 1 ADDR: ffff00817fffec00 NAME: "Normal" SIZE: 8454144 PRESENT: 98304 MIN/LOW/HIGH: 68/166/264 VM_STAT: NR_FREE_PAGES: 146 NR_ZONE_INACTIVE_ANON: 94668 NR_ZONE_ACTIVE_ANON: 3 NR_ZONE_INACTIVE_FILE: 735 NR_ZONE_ACTIVE_FILE: 78 NR_ZONE_UNEVICTABLE: 0 NR_ZONE_WRITE_PENDING: 0 NR_MLOCK: 0 NR_BOUNCE: 0 NR_ZSPAGES: 0 NR_FREE_CMA_PAGES: 0 In allow_direct_reclaim(), while processing ZONE_DMA32, the sum of inactive/active file-backed pages calculated in zone_reclaimable_pages() based on the result of zone_page_state_snapshot() is zero. Additionally, since this system lacks swap, the calculation of inactive/ active anonymous pages is skipped. crash> p nr_swap_pages nr_swap_pages = $1937 = { counter = 0 } As a result, ZONE_DMA32 is deemed unreclaimable and skipped, moving on to the processing of the next zone, ZONE_NORMAL, despite ZONE_DMA32 having free pages significantly exceeding the high watermark. The problem is that the pgdat->kswapd_failures hasn't been incremented. crash> px ((struct pglist_data *) 0xffff00817fffe540)->kswapd_failures $1935 = 0x0 This is because the node deemed balanced. The node balancing logic in balance_pgdat() evaluates all zones collectively. If one or more zones (e.g., ZONE_DMA32) have enough free pages to meet their watermarks, the entire node is deemed balanced. This causes balance_pgdat() to exit early before incrementing the kswapd_failures, as it considers the overall memory state acceptable, even though some zones (like ZONE_NORMAL) remain under significant pressure. The patch ensures that zone_reclaimable_pages() includes free pages (NR_FREE_PAGES) in its calculation when no other reclaimable pages are available (e.g., file-backed or anonymous pages). This change prevents zones like ZONE_DMA32, which have sufficient free pages, from being mistakenly deemed unreclaimable. By doing so, the patch ensures proper node balancing, avoids masking pressure on other zones like ZONE_NORMAL, and prevents infinite loops in throttle_direct_reclaim() caused by allow_direct_reclaim(pgdat) repeatedly returning false. The kernel hangs due to a task stuck in throttle_direct_reclaim(), caused by a node being incorrectly deemed balanced despite pressure in certain zones, such as ZONE_NORMAL. This issue arises from zone_reclaimable_pages() returning 0 for zones without reclaimable file- backed or anonymous pages, causing zones like ZONE_DMA32 with sufficient free pages to be skipped. The lack of swap or reclaimable pages results in ZONE_DMA32 being ignored during reclaim, masking pressure in other zones. Consequently, pgdat->kswapd_failures remains 0 in balance_pgdat(), preventing fallback mechanisms in allow_direct_reclaim() from being triggered, leading to an infinite loop in throttle_direct_reclaim(). This patch modifies zone_reclaimable_pages() to account for free pages (NR_FREE_PAGES) when no other reclaimable pages exist. This ensures zones with sufficient free pages are not skipped, enabling proper balancing and reclaim behavior. [akpm@linux-foundation.org: coding-style cleanups] Link: https://lkml.kernel.org/r/20241130164346.436469-1-snishika@redhat.com Link: https://lkml.kernel.org/r/20241130161236.433747-2-snishika@redhat.com Fixes: 5a1c84b ("mm: remove reclaim and compaction retry approximations") Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The folio refcount may be increased unexpectly through try_get_folio() by caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount to check whether a pmd page table is shared. The check is incorrect if the refcount is increased by the above caller, and this can cause the page table leaked: BUG: Bad page state in process sh pfn:109324 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324 flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff) page_type: f2(table) raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000 raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000 page dumped because: nonzero mapcount ... CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7 Tainted: [B]=BAD_PAGE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 dump_stack+0x18/0x28 bad_page+0x8c/0x130 free_page_is_bad_report+0xa4/0xb0 free_unref_page+0x3cc/0x620 __folio_put+0xf4/0x158 split_huge_pages_all+0x1e0/0x3e8 split_huge_pages_write+0x25c/0x2d8 full_proxy_write+0x64/0xd8 vfs_write+0xcc/0x280 ksys_write+0x70/0x110 __arm64_sys_write+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0x128 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x190/0x198 The issue may be triggered by damon, offline_page, page_idle, etc, which will increase the refcount of page table. 1. The page table itself will be discarded after reporting the "nonzero mapcount". 2. The HugeTLB page mapped by the page table miss freeing since we treat the page table as shared and a shared page table will not be unmapped. Fix it by introducing independent PMD page table shared count. As described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390 gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv pmds, so we can reuse the field as pt_share_count. Link: https://lkml.kernel.org/r/20241216071147.3984217-1-liushixin2@huawei.com Fixes: 39dde65 ("[PATCH] shared page table for hugetlb page") Signed-off-by: Liu Shixin <liushixin2@huawei.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Ken Chen <kenneth.w.chen@intel.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nanyong Sun <sunnanyong@huawei.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When COWing a relocation tree path, at relocation.c:replace_path(), we can trigger a lockdep splat while we are in the btrfs_search_slot() call against the relocation root. This happens in that callchain at ctree.c:read_block_for_search() when we happen to find a child extent buffer already loaded through the fs tree with a lockdep class set to the fs tree. So when we attempt to lock that extent buffer through a relocation tree we have to reset the lockdep class to the class for a relocation tree, since a relocation tree has extent buffers that used to belong to a fs tree and may currently be already loaded (we swap extent buffers between the two trees at the end of replace_path()). However we are missing calls to btrfs_maybe_reset_lockdep_class() to reset the lockdep class at ctree.c:read_block_for_search() before we read lock an extent buffer, just like we did for btrfs_search_slot() in commit b40130b ("btrfs: fix lockdep splat with reloc root extent buffers"). So add the missing btrfs_maybe_reset_lockdep_class() calls before the attempts to read lock an extent buffer at ctree.c:read_block_for_search(). The lockdep splat was reported by syzbot and it looks like this: ====================================================== WARNING: possible circular locking dependency detected 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Not tainted ------------------------------------------------------ syz.0.0/5335 is trying to acquire lock: ffff8880545dbc38 (btrfs-tree-01){++++}-{4:4}, at: btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 but task is already holding lock: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-treloc-02/1){+.+.}-{4:4}: reacquire_held_locks+0x3eb/0x690 kernel/locking/lockdep.c:5374 __lock_release kernel/locking/lockdep.c:5563 [inline] lock_release+0x396/0xa30 kernel/locking/lockdep.c:5870 up_write+0x79/0x590 kernel/locking/rwsem.c:1629 btrfs_force_cow_block+0x14b3/0x1fd0 fs/btrfs/ctree.c:660 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 (btrfs-tree-01/1){+.+.}-{4:4}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_write_nested+0xa2/0x220 kernel/locking/rwsem.c:1693 btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 btrfs_init_new_buffer fs/btrfs/extent-tree.c:5052 [inline] btrfs_alloc_tree_block+0x41c/0x1440 fs/btrfs/extent-tree.c:5132 btrfs_force_cow_block+0x526/0x1fd0 fs/btrfs/ctree.c:573 btrfs_cow_block+0x371/0x830 fs/btrfs/ctree.c:755 btrfs_search_slot+0xc01/0x3180 fs/btrfs/ctree.c:2153 btrfs_insert_empty_items+0x9c/0x1a0 fs/btrfs/ctree.c:4351 btrfs_insert_empty_item fs/btrfs/ctree.h:688 [inline] btrfs_insert_inode_ref+0x2bb/0xf80 fs/btrfs/inode-item.c:330 btrfs_rename_exchange fs/btrfs/inode.c:7990 [inline] btrfs_rename2+0xcb7/0x2b90 fs/btrfs/inode.c:8374 vfs_rename+0xbdb/0xf00 fs/namei.c:5067 do_renameat2+0xd94/0x13f0 fs/namei.c:5224 __do_sys_renameat2 fs/namei.c:5258 [inline] __se_sys_renameat2 fs/namei.c:5255 [inline] __x64_sys_renameat2+0xce/0xe0 fs/namei.c:5255 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (btrfs-tree-01){++++}-{4:4}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: btrfs-tree-01 --> btrfs-tree-01/1 --> btrfs-treloc-02/1 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-treloc-02/1); lock(btrfs-tree-01/1); lock(btrfs-treloc-02/1); rlock(btrfs-tree-01); *** DEADLOCK *** 8 locks held by syz.0.0/5335: #0: ffff88801e3ae420 (sb_writers#13){.+.+}-{0:0}, at: mnt_want_write_file+0x5e/0x200 fs/namespace.c:559 #1: ffff888052c760d0 (&fs_info->reclaim_bgs_lock){+.+.}-{4:4}, at: __btrfs_balance+0x4c2/0x26b0 fs/btrfs/volumes.c:4183 #2: ffff888052c74850 (&fs_info->cleaner_mutex){+.+.}-{4:4}, at: btrfs_relocate_block_group+0x775/0xd90 fs/btrfs/relocation.c:4086 #3: ffff88801e3ae610 (sb_internal#2){.+.+}-{0:0}, at: merge_reloc_root+0xf11/0x1ad0 fs/btrfs/relocation.c:1659 #4: ffff888052c76470 (btrfs_trans_num_writers){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #5: ffff888052c76498 (btrfs_trans_num_extwriters){++++}-{0:0}, at: join_transaction+0x405/0xda0 fs/btrfs/transaction.c:288 #6: ffff8880545db878 (btrfs-tree-01/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 #7: ffff8880545dba58 (btrfs-treloc-02/1){+.+.}-{4:4}, at: btrfs_tree_lock_nested+0x2f/0x250 fs/btrfs/locking.c:189 stack backtrace: CPU: 0 UID: 0 PID: 5335 Comm: syz.0.0 Not tainted 6.13.0-rc5-syzkaller-00163-gab75170520d4 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 down_read_nested+0xb5/0xa50 kernel/locking/rwsem.c:1649 btrfs_tree_read_lock_nested+0x2f/0x250 fs/btrfs/locking.c:146 btrfs_tree_read_lock fs/btrfs/locking.h:188 [inline] read_block_for_search+0x718/0xbb0 fs/btrfs/ctree.c:1610 btrfs_search_slot+0x1274/0x3180 fs/btrfs/ctree.c:2237 replace_path+0x1243/0x2740 fs/btrfs/relocation.c:1224 merge_reloc_root+0xc46/0x1ad0 fs/btrfs/relocation.c:1692 merge_reloc_roots+0x3b3/0x980 fs/btrfs/relocation.c:1942 relocate_block_group+0xb0a/0xd40 fs/btrfs/relocation.c:3754 btrfs_relocate_block_group+0x77d/0xd90 fs/btrfs/relocation.c:4087 btrfs_relocate_chunk+0x12c/0x3b0 fs/btrfs/volumes.c:3494 __btrfs_balance+0x1b0f/0x26b0 fs/btrfs/volumes.c:4278 btrfs_balance+0xbdc/0x10c0 fs/btrfs/volumes.c:4655 btrfs_ioctl_balance+0x493/0x7c0 fs/btrfs/ioctl.c:3670 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f1ac6985d29 Code: ff ff c3 (...) RSP: 002b:00007f1ac63fe038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f1ac6b76160 RCX: 00007f1ac6985d29 RDX: 0000000020000180 RSI: 00000000c4009420 RDI: 0000000000000007 RBP: 00007f1ac6a01b08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000001 R14: 00007f1ac6b76160 R15: 00007fffda145a88 </TASK> Reported-by: syzbot+63913e558c084f7f8fdc@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/677b3014.050a0220.3b53b0.0064.GAE@google.com/ Fixes: 9978599 ("btrfs: reduce lock contention when eb cache miss for btree search") Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

Commit 82c1f13 ("selftests/bpf: Add more stats into veristat") introduced new stats, added by default in the CSV output, that were not added to parse_stat_value, used in parse_stats_csv which is used in comparison mode. Thus it broke comparison mode altogether making it fail with "Unrecognized stat #7" and EINVAL. One quirk is that PROG_TYPE and ATTACH_TYPE have been transformed to strings using libbpf_bpf_prog_type_str and libbpf_bpf_attach_type_str respectively. Since we might not want to compare those string values, we just skip the parsing in this patch. We might want to translate it back to the enum value or compare the string value directly. Fixes: 82c1f13 ("selftests/bpf: Add more stats into veristat") Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com> Tested-by: Mykyta Yatsenko<yatsenko@meta.com> Link: https://lore.kernel.org/r/20241220152218.28405-1-mahe.tardy@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

When kernel is built without debuginfo, running 'perf record' with --off-cpu results in segfault as below: ./perf record --off-cpu -e dummy sleep 1 libbpf: kernel BTF is missing at '/sys/kernel/btf/vmlinux', was CONFIG_DEBUG_INFO_BTF enabled? libbpf: failed to find '.BTF' ELF section in /lib/modules/6.13.0-rc3+/build/vmlinux libbpf: failed to find valid kernel BTF Segmentation fault (core dumped) The backtrace pointed to: #0 0x00000000100fb17c in btf.type_cnt () #1 0x00000000100fc1a8 in btf_find_by_name_kind () #2 0x00000000100fc38c in btf.find_by_name_kind () #3 0x00000000102ee3ac in off_cpu_prepare () #4 0x000000001002f78c in cmd_record () #5 0x00000000100aee78 in run_builtin () #6 0x00000000100af3e4 in handle_internal_command () #7 0x000000001001004c in main () Code sequence is: static void check_sched_switch_args(void) { struct btf *btf = btf__load_vmlinux_btf(); const struct btf_type *t1, *t2, *t3; u32 type_id; type_id = btf__find_by_name_kind(btf, "btf_trace_sched_switch", BTF_KIND_TYPEDEF); btf__load_vmlinux_btf() fails when CONFIG_DEBUG_INFO_BTF is not enabled. Here bpf__find_by_name_kind() calls btf__type_cnt() with NULL btf value and results in segfault. To fix this, add a check to see if btf is not NULL before invoking bpf__find_by_name_kind(). Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Disha Goel <disgoel@linux.vnet.ibm.com> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://lore.kernel.org/r/20241223135813.8175-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

libtraceevent parses and returns an array of argument fields, sometimes larger than RAW_SYSCALL_ARGS_NUM (6) because it includes "__syscall_nr", idx will traverse to index 6 (7th element) whereas sc->fmt->arg holds 6 elements max, creating an out-of-bounds access. This runtime error is found by UBsan. The error message: $ sudo UBSAN_OPTIONS=print_stacktrace=1 ./perf trace -a --max-events=1 builtin-trace.c:1966:35: runtime error: index 6 out of bounds for type 'syscall_arg_fmt [6]' #0 0x5c04956be5fe in syscall__alloc_arg_fmts /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:1966 #1 0x5c04956c0510 in trace__read_syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2110 #2 0x5c04956c372b in trace__syscall_info /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:2436 #3 0x5c04956d2f39 in trace__init_syscalls_bpf_prog_array_maps /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:3897 #4 0x5c04956d6d25 in trace__run /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:4335 #5 0x5c04956e112e in cmd_trace /home/howard/hw/linux-perf/tools/perf/builtin-trace.c:5502 #6 0x5c04956eda7d in run_builtin /home/howard/hw/linux-perf/tools/perf/perf.c:351 #7 0x5c04956ee0a8 in handle_internal_command /home/howard/hw/linux-perf/tools/perf/perf.c:404 #8 0x5c04956ee37f in run_argv /home/howard/hw/linux-perf/tools/perf/perf.c:448 #9 0x5c04956ee8e9 in main /home/howard/hw/linux-perf/tools/perf/perf.c:556 #10 0x79eb3622a3b7 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 torvalds#11 0x79eb3622a47a in __libc_start_main_impl ../csu/libc-start.c:360 torvalds#12 0x5c04955422d4 in _start (/home/howard/hw/linux-perf/tools/perf/perf+0x4e02d4) (BuildId: 5b6cab2d59e96a4341741765ad6914a4d784dbc6) 0.000 ( 0.014 ms): Chrome_ChildIO/117244 write(fd: 238, buf: !, count: 1) = 1 Fixes: 5e58fcf ("perf trace: Allow allocating sc->arg_fmt even without the syscall tracepoint") Signed-off-by: Howard Chu <howardchu95@gmail.com> Link: https://lore.kernel.org/r/20250122025519.361873-1-howardchu95@gmail.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Fix the suspend/resume path by ensuring the rtnl lock is held where required. Calls to ravb_open, ravb_close and wol operations must be performed under the rtnl lock to prevent conflicts with ongoing ndo operations. Without this fix, the following warning is triggered: [ 39.032969] ============================= [ 39.032983] WARNING: suspicious RCU usage [ 39.033019] ----------------------------- [ 39.033033] drivers/net/phy/phy_device.c:2004 suspicious rcu_dereference_protected() usage! ... [ 39.033597] stack backtrace: [ 39.033613] CPU: 0 UID: 0 PID: 174 Comm: python3 Not tainted 6.13.0-rc7-next-20250116-arm64-renesas-00002-g35245dfdc62c #7 [ 39.033623] Hardware name: Renesas SMARC EVK version 2 based on r9a08g045s33 (DT) [ 39.033628] Call trace: [ 39.033633] show_stack+0x14/0x1c (C) [ 39.033652] dump_stack_lvl+0xb4/0xc4 [ 39.033664] dump_stack+0x14/0x1c [ 39.033671] lockdep_rcu_suspicious+0x16c/0x22c [ 39.033682] phy_detach+0x160/0x190 [ 39.033694] phy_disconnect+0x40/0x54 [ 39.033703] ravb_close+0x6c/0x1cc [ 39.033714] ravb_suspend+0x48/0x120 [ 39.033721] dpm_run_callback+0x4c/0x14c [ 39.033731] device_suspend+0x11c/0x4dc [ 39.033740] dpm_suspend+0xdc/0x214 [ 39.033748] dpm_suspend_start+0x48/0x60 [ 39.033758] suspend_devices_and_enter+0x124/0x574 [ 39.033769] pm_suspend+0x1ac/0x274 [ 39.033778] state_store+0x88/0x124 [ 39.033788] kobj_attr_store+0x14/0x24 [ 39.033798] sysfs_kf_write+0x48/0x6c [ 39.033808] kernfs_fop_write_iter+0x118/0x1a8 [ 39.033817] vfs_write+0x27c/0x378 [ 39.033825] ksys_write+0x64/0xf4 [ 39.033833] __arm64_sys_write+0x18/0x20 [ 39.033841] invoke_syscall+0x44/0x104 [ 39.033852] el0_svc_common.constprop.0+0xb4/0xd4 [ 39.033862] do_el0_svc+0x18/0x20 [ 39.033870] el0_svc+0x3c/0xf0 [ 39.033880] el0t_64_sync_handler+0xc0/0xc4 [ 39.033888] el0t_64_sync+0x154/0x158 [ 39.041274] ravb 11c30000.ethernet eth0: Link is Down Reported-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Closes: https://lore.kernel.org/netdev/4c6419d8-c06b-495c-b987-d66c2e1ff848@tuxon.dev/ Fixes: 0184165 ("ravb: add sleep PM suspend/resume support") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

This fixes the following hard lockup in isolate_lru_folios() during memory reclaim. If the LRU mostly contains ineligible folios this may trigger watchdog. watchdog: Watchdog detected hard LOCKUP on cpu 173 RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0 Call Trace: _raw_spin_lock_irqsave+0x31/0x40 folio_lruvec_lock_irqsave+0x5f/0x90 folio_batch_move_lru+0x91/0x150 lru_add_drain_per_cpu+0x1c/0x40 process_one_work+0x17d/0x350 worker_thread+0x27b/0x3a0 kthread+0xe8/0x120 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1b/0x30 lruvec->lru_lock owner： PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0" #0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555 #1 [fffffe0000945e68] nmi_handle at ffffffffa563b171 #2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920 #3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4 #4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde [exception RIP: isolate_lru_folios+403] RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002 RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88 RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048 RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001 R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008 R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 <NMI exception stack> #5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 #6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788 #7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0 #8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354 #9 [ffffc90006fb7ef8] kthread at ffffffffa5748238 crash> Scenario: User processe are requesting a large amount of memory and keep page active. Then a module continuously requests memory from ZONE_DMA32 area. Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached. However pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. Reproduce: Terminal 1: Construct to continuously increase pages active(anon). mkdir /tmp/memory mount -t tmpfs -o size=1024000M tmpfs /tmp/memory dd if=/dev/zero of=/tmp/memory/block bs=4M tail /tmp/memory/block Terminal 2: vmstat -a 1 active will increase. procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ... r b swpd free inact active si so bi bo 1 0 0 1445623076 45898836 83646008 0 0 0 1 0 0 1445623076 43450228 86094616 0 0 0 1 0 0 1445623076 41003480 88541364 0 0 0 1 0 0 1445623076 38557088 90987756 0 0 0 1 0 0 1445623076 36109688 93435156 0 0 0 1 0 0 1445619552 33663256 95881632 0 0 0 1 0 0 1445619804 31217140 98327792 0 0 0 1 0 0 1445619804 28769988 100774944 0 0 0 1 0 0 1445619804 26322348 103222584 0 0 0 1 0 0 1445619804 23875592 105669340 0 0 0 cat /proc/meminfo | head Active(anon) increase. MemTotal: 1579941036 kB MemFree: 1445618500 kB MemAvailable: 1453013224 kB Buffers: 6516 kB Cached: 128653956 kB SwapCached: 0 kB Active: 118110812 kB Inactive: 11436620 kB Active(anon): 115345744 kB Inactive(anon): 945292 kB When the Active(anon) is 115345744 kB, insmod module triggers the ZONE_DMA32 watermark. perf record -e vmscan:mm_vmscan_lru_isolate -aR perf script isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2 nr_skipped=2 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844 nr_skipped=28835844 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29 nr_skipped=29 nr_taken=0 lru=active_anon isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0 nr_skipped=0 nr_taken=0 lru=active_anon See nr_scanned=28835844. 28835844 * 4k = 115343376KB approximately equal to 115345744 kB. If increase Active(anon) to 1000G then insmod module triggers the ZONE_DMA32 watermark. hard lockup will occur. In my device nr_scanned = 0000000003e3e937 when hard lockup. Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB. [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53 ffffc90006fb7c30: 0000000000000020 0000000000000000 ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000 ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8 ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48 ffffc90006fb7c70: 0000000000000000 0000000000000000 ffffc90006fb7c80: 0000000000000000 0000000000000000 ffffc90006fb7c90: 0000000000000000 0000000000000000 ffffc90006fb7ca0: 0000000000000000 0000000003e3e937 ffffc90006fb7cb0: 0000000000000000 0000000000000000 ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000 About the Fixes: Why did it take eight years to be discovered? The problem requires the following conditions to occur: 1. The device memory should be large enough. 2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area. 3. The memory in ZONE_DMA32 needs to reach the watermark. If the memory is not large enough, or if the usage design of ZONE_DMA32 area memory is reasonable, this problem is difficult to detect. notes: The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL, but other suitable scenarios may also trigger the problem. Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn Fixes: b2e1875 ("mm, vmscan: begin reclaiming pages on a per-node basis") Signed-off-by: liuye <liuye@kylinos.cn> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

devm_platform_profile_register() expects a pointer to the private driver data but instead an address of the pointer variable is passed due to a typo. This leads to the crashes later: BUG: unable to handle page fault for address: 00000000fe0d0044 PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 UID: 0 PID: 1284 Comm: tuned Tainted: G W 6.13.0+ #7 Tainted: [W]=WARN Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 RIP: 0010:__mutex_lock.constprop.0+0x6bf/0x7f0 Call Trace: <TASK> dytc_profile_set+0x4a/0x140 [ideapad_laptop] _store_and_notify+0x13/0x40 [platform_profile] class_for_each_device+0x145/0x180 platform_profile_store+0xc0/0x130 [platform_profile] kernfs_fop_write_iter+0x13e/0x1f0 vfs_write+0x290/0x450 ksys_write+0x6c/0xe0 do_syscall_64+0x82/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Found by Linux Verification Center (linuxtesting.org). Fixes: 249c576 ("ACPI: platform_profile: Let drivers set drvdata to the class device") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250127210202.568691-1-pchelkin@ispras.ru Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

We have several places across the kernel where we want to access another task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making a call to syscall_get_arguments(). This works for register arguments right away by accessing the task's `regs' member of `struct pt_regs', however for stack arguments seen with 32-bit/o32 kernels things are more complicated. Technically they ought to be obtained from the user stack with calls to an access_remote_vm(), but we have an easier way available already. So as to be able to access syscall stack arguments as regular function arguments following the MIPS calling convention we copy them over from the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in handle_sys(), to the current stack frame's outgoing argument space at the top of the stack, which is where the handler called expects to see its incoming arguments. This area is also pointed at by the `pt_regs' pointer obtained by task_pt_regs(). Make the o32 stack argument space a proper member of `struct pt_regs' then, by renaming the existing member from `pad0' to `args' and using generated offsets to access the space. No functional change though. With the change in place the o32 kernel stack frame layout at the entry to a syscall handler invoked by handle_sys() is therefore as follows: $sp + 68 -> | ... | <- pt_regs.regs[9] +---------------------+ $sp + 64 -> | $t0 | <- pt_regs.regs[8] +---------------------+ $sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7] +---------------------+ $sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6] +---------------------+ $sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5] +---------------------+ $sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4] +---------------------+ $sp + 44 -> | $v1 | <- pt_regs.regs[3] +---------------------+ $sp + 40 -> | $v0 | <- pt_regs.regs[2] +---------------------+ $sp + 36 -> | $at | <- pt_regs.regs[1] +---------------------+ $sp + 32 -> | $zero | <- pt_regs.regs[0] +---------------------+ $sp + 28 -> | stack argument #8 | <- pt_regs.args[7] +---------------------+ $sp + 24 -> | stack argument #7 | <- pt_regs.args[6] +---------------------+ $sp + 20 -> | stack argument #6 | <- pt_regs.args[5] +---------------------+ $sp + 16 -> | stack argument #5 | <- pt_regs.args[4] +---------------------+ $sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3] +---------------------+ $sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2] +---------------------+ $sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1] +---------------------+ $sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0] +---------------------+ holding user data received and with the first 4 frame slots reserved by the psABI for the compiler to spill the incoming arguments from $a0-$a3 registers (which it sometimes does according to its needs) and the next 4 frame slots designated by the psABI for any stack function arguments that follow. This data is also available for other tasks to peek/poke at as reqired and where permitted. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

This makes ptrace/get_syscall_info selftest pass on mips o32 and mips64 o32 by fixing the following two test assertions: 1. get_syscall_info test assertion on mips o32: # get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432) # get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch 2. get_syscall_info test assertion on mips64 o32: # get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753) # get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch The first assertion happens due to mips_get_syscall_arg() trying to access another task's context but failing to do it properly because get_user() it calls just peeks at the current task's context. It usually does not crash because the default user stack always gets assigned the same VMA, but it is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack was switched (via setcontext(3) or however) or a non-default process's thread peeked at, and in any case irrelevant data is obtained just as observed with the test case. mips_get_syscall_arg() ought to be using access_remote_vm() instead to retrieve the other task's stack contents, but given that the data has been already obtained and saved in `struct pt_regs' it would be an overkill. The first assertion is fixed for mips o32 by using struct pt_regs.args instead of get_user() to obtain syscall arguments. This approach works due to this piece in arch/mips/kernel/scall32-o32.S: /* * Ok, copy the args from the luser stack to the kernel stack. */ .set push .set noreorder .set nomacro load_a4: user_lw(t5, 16(t0)) # argument #5 from usp load_a5: user_lw(t6, 20(t0)) # argument #6 from usp load_a6: user_lw(t7, 24(t0)) # argument #7 from usp load_a7: user_lw(t8, 28(t0)) # argument #8 from usp loads_done: sw t5, PT_ARG4(sp) # argument #5 to ksp sw t6, PT_ARG5(sp) # argument #6 to ksp sw t7, PT_ARG6(sp) # argument #7 to ksp sw t8, PT_ARG7(sp) # argument #8 to ksp .set pop .section __ex_table,"a" PTR_WD load_a4, bad_stack_a4 PTR_WD load_a5, bad_stack_a5 PTR_WD load_a6, bad_stack_a6 PTR_WD load_a7, bad_stack_a7 .previous arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that allows fixing the issue by obtaining syscall arguments from struct pt_regs.regs[4..11] instead of the erroneous use of get_user(). The second assertion is fixed by truncating 64-bit values to 32-bit syscall arguments. Fixes: c0ff3c5 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by: Dmitry V. Levin <ldv@strace.io> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

Fixes the following: [ 17.607394] kernel BUG at fs/bcachefs/reflink.c:261! [ 17.608316] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 17.608485] CPU: 0 UID: 0 PID: 564 Comm: bch-rebalance/3 Tainted: G OE 6.14.0-rc6-arch1-gfcb0bd9609d2 #7 0efd7a8f4a00afeb2c5fb6e7ecb1aec8ddcbb1e1 [ 17.608616] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE [ 17.608736] Hardware name: Micro-Star International Co., Ltd. MS-7D75/MAG B650 TOMAHAWK WIFI (MS-7D75), BIOS 1.74 08/01/2023 [ 17.608855] RIP: 0010:bch2_lookup_indirect_extent+0x252/0x290 [bcachefs] [ 17.609006] Code: 00 00 00 00 e8 7f 51 f5 ff 89 c3 85 c0 74 52 48 8b 7d b0 4c 89 ee e8 4d 4b f4 ff 48 63 d3 48 89 d0 31 d2 e9 2e ff ff ff 0f 0b <0f> 0b 48 8b 7d b0 4c 89 ee 48 89 55 a8 e8 2c 4b f4 ff 4c 8b 55 a8 [ 17.609136] RSP: 0018:ffffa3714455f850 EFLAGS: 00010246 [ 17.609261] RAX: 0000000000000080 RBX: ffff895891098790 RCX: 0000000000000000 [ 17.609387] RDX: 0000000000000080 RSI: ffffa3714455fa90 RDI: ffff895889550000 [ 17.609511] RBP: ffffa3714455f8c0 R08: ffff895891098790 R09: 0000000000000001 [ 17.609637] R10: ffffa3714455f8d8 R11: ffffa3714455f950 R12: ffffa3714455fa58 [ 17.609763] R13: ffff895891098790 R14: ffffa3714455fa58 R15: ffff895889550000 [ 17.609888] FS: 0000000000000000(0000) GS:ffff896757c00000(0000) knlGS:0000000000000000 [ 17.610015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.610143] CR2: 0000716b8cda2750 CR3: 0000000914e22000 CR4: 0000000000f50ef0 [ 17.610272] PKRU: 55555554 [ 17.610403] Call Trace: [ 17.610535] <TASK> [ 17.610662] ? __die_body.cold+0x19/0x27 [ 17.610791] ? die+0x2e/0x50 [ 17.610918] ? do_trap+0xca/0x110 [ 17.611049] ? do_error_trap+0x6a/0x90 [ 17.611178] ? bch2_lookup_indirect_extent+0x252/0x290 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.611331] ? exc_invalid_op+0x50/0x70 [ 17.611468] ? bch2_lookup_indirect_extent+0x252/0x290 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.611620] ? asm_exc_invalid_op+0x1a/0x20 [ 17.611757] ? bch2_lookup_indirect_extent+0x252/0x290 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.611911] ? bch2_move_data_btree+0x58a/0x6c0 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.612084] bch2_move_data_btree+0x58a/0x6c0 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.612256] ? __pfx_rebalance_pred+0x10/0x10 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.612431] ? bch2_move_extent+0x3d7/0x6e0 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.612607] ? __bch2_move_data+0xea/0x200 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.612782] __bch2_move_data+0xea/0x200 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.612959] ? __pfx_rebalance_pred+0x10/0x10 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.613149] do_rebalance+0x517/0x8d0 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.613342] ? local_clock_noinstr+0xd/0xd0 [ 17.613518] ? local_clock+0x15/0x30 [ 17.613693] ? __bch2_trans_get+0x152/0x300 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.613890] ? __pfx_bch2_rebalance_thread+0x10/0x10 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] [ 17.614090] bch2_rebalance_thread+0x66/0xb0 [bcachefs c42b95c23facdfe11d39755520127cd771dddec2] The offset_into_extent bit was copied from the read path, but it's unnecessary here, where we always want to read and move the entire indirect extent, and it causes the assertion pop - because we're using a non-extents iterator, which always points to the end of the reflink pointer. Reported-by: Maël Kerbiriou <mael.kerbiriou@free.fr> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

perf test 11 hwmon fails on s390 with this error # ./perf test -Fv 11 --- start --- ---- end ---- 11.1: Basic parsing test : Ok --- start --- Testing 'temp_test_hwmon_event1' Using CPUID IBM,3931,704,A01,3.7,002f temp_test_hwmon_event1 -> hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/ FAILED tests/hwmon_pmu.c:189 Unexpected config for 'temp_test_hwmon_event1', 292470092988416 != 655361 ---- end ---- 11.2: Parsing without PMU name : FAILED! --- start --- Testing 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/' FAILED tests/hwmon_pmu.c:189 Unexpected config for 'hwmon_a_test_hwmon_pmu/temp_test_hwmon_event1/', 292470092988416 != 655361 ---- end ---- 11.3: Parsing with PMU name : FAILED! # The root cause is in member test_event::config which is initialized to 0xA0001 or 655361. During event parsing a long list event parsing functions are called and end up with this gdb call stack: #0 hwmon_pmu__config_term (hwm=0x168dfd0, attr=0x3ffffff5ee8, term=0x168db60, err=0x3ffffff81c8) at util/hwmon_pmu.c:623 #1 hwmon_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, err=0x3ffffff81c8) at util/hwmon_pmu.c:662 #2 0x00000000012f870c in perf_pmu__config_terms (pmu=0x168dfd0, attr=0x3ffffff5ee8, terms=0x3ffffff5ea8, zero=false, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1519 #3 0x00000000012f88a4 in perf_pmu__config (pmu=0x168dfd0, attr=0x3ffffff5ee8, head_terms=0x3ffffff5ea8, apply_hardcoded=false, err=0x3ffffff81c8) at util/pmu.c:1545 #4 0x00000000012680c4 in parse_events_add_pmu (parse_state=0x3ffffff7fb8, list=0x168dc00, pmu=0x168dfd0, const_parsed_terms=0x3ffffff6090, auto_merge_stats=true, alternate_hw_config=10) at util/parse-events.c:1508 #5 0x00000000012684c6 in parse_events_multi_pmu_add (parse_state=0x3ffffff7fb8, event_name=0x168ec10 "temp_test_hwmon_event1", hw_config=10, const_parsed_terms=0x0, listp=0x3ffffff6230, loc_=0x3ffffff70e0) at util/parse-events.c:1592 #6 0x00000000012f0e4e in parse_events_parse (_parse_state=0x3ffffff7fb8, scanner=0x16878c0) at util/parse-events.y:293 #7 0x00000000012695a0 in parse_events__scanner (str=0x3ffffff81d8 "temp_test_hwmon_event1", input=0x0, parse_state=0x3ffffff7fb8) at util/parse-events.c:1867 #8 0x000000000126a1e8 in __parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", pmu_filter=0x0, err=0x3ffffff81c8, fake_pmu=false, warn_if_reordered=true, fake_tp=false) at util/parse-events.c:2136 #9 0x00000000011e36aa in parse_events (evlist=0x168b580, str=0x3ffffff81d8 "temp_test_hwmon_event1", err=0x3ffffff81c8) at /root/linux/tools/perf/util/parse-events.h:41 #10 0x00000000011e3e64 in do_test (i=0, with_pmu=false, with_alias=false) at tests/hwmon_pmu.c:164 torvalds#11 0x00000000011e422c in test__hwmon_pmu (with_pmu=false) at tests/hwmon_pmu.c:219 torvalds#12 0x00000000011e431c in test__hwmon_pmu_without_pmu (test=0x1610368 <suite.hwmon_pmu>, subtest=1) at tests/hwmon_pmu.c:23 where the attr::config is set to value 292470092988416 or 0x10a0000000000 in line 625 of file ./util/hwmon_pmu.c: attr->config = key.type_and_num; However member key::type_and_num is defined as union and bit field: union hwmon_pmu_event_key { long type_and_num; struct { int num :16; enum hwmon_type type :8; }; }; s390 is big endian and Intel is little endian architecture. The events for the hwmon dummy pmu have num = 1 or num = 2 and type is set to HWMON_TYPE_TEMP (which is 10). On s390 this assignes member key::type_and_num the value of 0x10a0000000000 (which is 292470092988416) as shown in above trace output. Fix this and export the structure/union hwmon_pmu_event_key so the test shares the same implementation as the event parsing functions for union and bit fields. This should avoid endianess issues on all platforms. Output after: # ./perf test -F 11 11.1: Basic parsing test : Ok 11.2: Parsing without PMU name : Ok 11.3: Parsing with PMU name : Ok # Fixes: 531ee0f ("perf test: Add hwmon "PMU" test") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250131112400.568975-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Ian told me that there are many memory leaks in the hierarchy mode. I can easily reproduce it with the follwing command. $ make DEBUG=1 EXTRA_CFLAGS=-fsanitize=leak $ perf record --latency -g -- ./perf test -w thloop $ perf report -H --stdio ... Indirect leak of 168 byte(s) in 21 object(s) allocated from: #0 0x7f3414c16c65 in malloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:75 #1 0x55ed3602346e in map__get util/map.h:189 #2 0x55ed36024cc4 in hist_entry__init util/hist.c:476 #3 0x55ed36025208 in hist_entry__new util/hist.c:588 #4 0x55ed36027c05 in hierarchy_insert_entry util/hist.c:1587 #5 0x55ed36027e2e in hists__hierarchy_insert_entry util/hist.c:1638 #6 0x55ed36027fa4 in hists__collapse_insert_entry util/hist.c:1685 #7 0x55ed360283e8 in hists__collapse_resort util/hist.c:1776 #8 0x55ed35de0323 in report__collapse_hists /home/namhyung/project/linux/tools/perf/builtin-report.c:735 #9 0x55ed35de15b4 in __cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1119 #10 0x55ed35de43dc in cmd_report /home/namhyung/project/linux/tools/perf/builtin-report.c:1867 torvalds#11 0x55ed35e66767 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:351 torvalds#12 0x55ed35e66a0e in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:404 torvalds#13 0x55ed35e66b67 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:448 torvalds#14 0x55ed35e66eb0 in main /home/namhyung/project/linux/tools/perf/perf.c:556 torvalds#15 0x7f340ac33d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 ... $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 93 I found that hist_entry__delete() missed to release child entries in the hierarchy tree (hroot_{in,out}). It needs to iterate the child entries and call hist_entry__delete() recursively. After this change: $ perf report -H --stdio 2>&1 | grep -c '^Indirect leak' 0 Reported-by: Ian Rogers <irogers@google.com> Tested-by Thomas Falcon <thomas.falcon@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250307061250.320849-2-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

The env.pmu_mapping can be leaked when it reads data from a pipe on AMD. For a pipe data, it reads the header data including pmu_mapping from PERF_RECORD_HEADER_FEATURE runtime. But it's already set in: perf_session__new() __perf_session__new() evlist__init_trace_event_sample_raw() evlist__has_amd_ibs() perf_env__nr_pmu_mappings() Then it'll overwrite that when it processes the HEADER_FEATURE record. Here's a report from address sanitizer. Direct leak of 2689 byte(s) in 1 object(s) allocated from: #0 0x7fed8f814596 in realloc ../../../../src/libsanitizer/lsan/lsan_interceptors.cpp:98 #1 0x5595a7d416b1 in strbuf_grow util/strbuf.c:64 #2 0x5595a7d414ef in strbuf_init util/strbuf.c:25 #3 0x5595a7d0f4b7 in perf_env__read_pmu_mappings util/env.c:362 #4 0x5595a7d12ab7 in perf_env__nr_pmu_mappings util/env.c:517 #5 0x5595a7d89d2f in evlist__has_amd_ibs util/amd-sample-raw.c:315 #6 0x5595a7d87fb2 in evlist__init_trace_event_sample_raw util/sample-raw.c:23 #7 0x5595a7d7f893 in __perf_session__new util/session.c:179 #8 0x5595a7b79572 in perf_session__new util/session.h:115 #9 0x5595a7b7e9dc in cmd_report builtin-report.c:1603 #10 0x5595a7c019eb in run_builtin perf.c:351 torvalds#11 0x5595a7c01c92 in handle_internal_command perf.c:404 torvalds#12 0x5595a7c01deb in run_argv perf.c:448 torvalds#13 0x5595a7c02134 in main perf.c:556 torvalds#14 0x7fed85833d67 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58 Let's free the existing pmu_mapping data if any. Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20250311000416.817631-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Currently, when no active threads are running, a root user using nfsdctl command can try to remove a particular listener from the list of previously added ones, then start the server by increasing the number of threads, it leads to the following problem: [ 158.835354] refcount_t: addition on 0; use-after-free. [ 158.835603] WARNING: CPU: 2 PID: 9145 at lib/refcount.c:25 refcount_warn_saturate+0x160/0x1a0 [ 158.836017] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd auth_rpcgss nfs_acl lockd grace overlay isofs uinput snd_seq_dummy snd_hrtimer nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 rfkill ip_set nf_tables qrtr sunrpc vfat fat uvcvideo videobuf2_vmalloc videobuf2_memops uvc videobuf2_v4l2 videodev videobuf2_common snd_hda_codec_generic mc e1000e snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore sg loop dm_multipath dm_mod nfnetlink vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs libcrc32c crct10dif_ce ghash_ce vmwgfx sha2_ce sha256_arm64 sr_mod sha1_ce cdrom nvme drm_client_lib drm_ttm_helper ttm nvme_core drm_kms_helper nvme_auth drm fuse [ 158.840093] CPU: 2 UID: 0 PID: 9145 Comm: nfsd Kdump: loaded Tainted: G B W 6.13.0-rc6+ #7 [ 158.840624] Tainted: [B]=BAD_PAGE, [W]=WARN [ 158.840802] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024 [ 158.841220] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 158.841563] pc : refcount_warn_saturate+0x160/0x1a0 [ 158.841780] lr : refcount_warn_saturate+0x160/0x1a0 [ 158.842000] sp : ffff800089be7d80 [ 158.842147] x29: ffff800089be7d80 x28: ffff00008e68c148 x27: ffff00008e68c148 [ 158.842492] x26: ffff0002e3b5c000 x25: ffff600011cd1829 x24: ffff00008653c010 [ 158.842832] x23: ffff00008653c000 x22: 1fffe00011cd1829 x21: ffff00008653c028 [ 158.843175] x20: 0000000000000002 x19: ffff00008653c010 x18: 0000000000000000 [ 158.843505] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 158.843836] x14: 0000000000000000 x13: 0000000000000001 x12: ffff600050a26493 [ 158.844143] x11: 1fffe00050a26492 x10: ffff600050a26492 x9 : dfff800000000000 [ 158.844475] x8 : 00009fffaf5d9b6e x7 : ffff000285132493 x6 : 0000000000000001 [ 158.844823] x5 : ffff000285132490 x4 : ffff600050a26493 x3 : ffff8000805e72bc [ 158.845174] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000098588000 [ 158.845528] Call trace: [ 158.845658] refcount_warn_saturate+0x160/0x1a0 (P) [ 158.845894] svc_recv+0x58c/0x680 [sunrpc] [ 158.846183] nfsd+0x1fc/0x348 [nfsd] [ 158.846390] kthread+0x274/0x2f8 [ 158.846546] ret_from_fork+0x10/0x20 [ 158.846714] ---[ end trace 0000000000000000 ]--- nfsd_nl_listener_set_doit() would manipulate the list of transports of server's sv_permsocks and close the specified listener but the other list of transports (server's sp_xprts list) would not be changed leading to the problem above. Instead, determined if the nfsdctl is trying to remove a listener, in which case, delete all the existing listener transports and re-create all-but-the-removed ones. Fixes: 16a4711 ("NFSD: add listener-{set,get} netlink command") Signed-off-by: Olga Kornievskaia <okorniev@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

…ge_order() Patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT", v3. Let's add an "easy" way to decide -- without false positives, without page-mapcounts and without page table/rmap scanning -- whether a large folio is "certainly mapped exclusively" into a single MM, or whether it "maybe mapped shared" into multiple MMs. Use that information to implement Copy-on-Write reuse, to convert folio_likely_mapped_shared() to folio_maybe_mapped_share(), and to introduce a kernel config option that lets us not use+maintain per-page mapcounts in large folios anymore. The bigger picture was presented at LSF/MM [1]. This series is effectively a follow-up on my early work [2], which implemented a more precise, but also more complicated, way to identify whether a large folio is "mapped shared" into multiple MMs or "mapped exclusively" into a single MM. 1 Patch Organization ==================== Patch #1 -> #6: make more room in order-1 folios, so we have two "unsigned long" available for our purposes Patch #7 -> torvalds#11: preparations Patch torvalds#12: MM owner tracking for large folios Patch torvalds#13: COW reuse for PTE-mapped anon THP Patch torvalds#14: folio_maybe_mapped_shared() Patch torvalds#15 -> torvalds#20: introduce and implement CONFIG_NO_PAGE_MAPCOUNT 2 MM owner tracking =================== We assign each MM a unique ID ("MM ID"), to be able to squeeze more information in our folios. On 32bit we use 15-bit IDs, on 64bit we use 31-bit IDs. For each large folios, we now store two MM-ID+mapcount ("slot") combinations: * mm0_id + mm0_mapcount * mm1_id + mm1_mapcount On 32bit, we use a 16-bit per-MM mapcount, on 64bit an ordinary 32bit mapcount. This way, we require 2x "unsigned long" on 32bit and 64bit for both slots. Paired with the large mapcount, we can reliably identify whether one of these MMs is the current owner (-> owns all mappings) or even holds all folio references (-> owns all mappings, and all references are from mappings). As long as only two MMs map folio pages at a time, we can reliably and precisely identify whether a large folio is "mapped shared" or "mapped exclusively". Any additional MM that starts mapping the folio while there are no free slots becomes an "untracked MM". If one such "untracked MM" is the last one mapping a folio exclusively, we will not detect the folio as "mapped exclusively" but instead as "maybe mapped shared". (exception: only a single mapping remains) So that's where the approach gets imprecise. For now, we use a bit-spinlock to sync the large mapcount + slots, and make sure we do keep the machinery fast, to not degrade (un)map performance drastically: for example, we make sure to only use a single atomic (when grabbing the bit-spinlock), like we would already perform when updating the large mapcount. 3 CONFIG_NO_PAGE_MAPCOUNT ========================= patch torvalds#15 -> torvalds#20 spell out and document what exactly is affected when not maintaining the per-page mapcounts in large folios anymore. Most importantly, as we cannot maintain folio->_nr_pages_mapped anymore when (un)mapping pages, we'll account a complete folio as mapped if a single page is mapped. In addition, we'll not detect partially mapped anonymous folios as such in all cases yet. Likely less relevant changes include that we might now under-estimate the USS (Unique Set Size) of a process, but never over-estimate it. The goal is to make CONFIG_NO_PAGE_MAPCOUNT the default at some point, to then slowly make it the only option, as we learn about real-life impacts and possible ways to mitigate them. 4 Performance ============= Detailed performance numbers were included in v1 [3], and not that much changed between v1 and v2. I did plenty of measurements on different systems in the meantime, that all revealed slightly different results. The pte-mapped-folio micro-benchmarks [4] are fairly sensitive to code layout changes on some systems. Especially the fork() benchmark started being more-shaky-than-before on recent kernels for some reason. In summary, with my micro-benchmarks: * Small folios are not impacted. * CoW performance seems to be mostly unchanged across all folios sizes. * CoW reuse performance of large folios now matches CoW reuse performance of small folios, because we now actually implement the CoW reuse optimization. On an Intel Xeon Silver 4210R I measured a ~65% reduction in runtime, on an arm64 system I measured ~54% reduction. * munmap() performance improves with CONFIG_NO_PAGE_MAPCOUNT. I saw double-digit % reduction (up to ~30% on an Intel Xeon Silver 4210R and up to ~70% on an AmpereOne A192-32X) with larger folios. The larger the folios, the larger the performance improvement. * munmao() performance very slightly (couple percent) degrades without CONFIG_NO_PAGE_MAPCOUNT for smaller folios. For larger folios, there seems to be no change at all. * fork() performance improves with CONFIG_NO_PAGE_MAPCOUNT. I saw double-digit % reduction (up to ~20% on an Intel Xeon Silver 4210R and up to ~10% on an AmpereOne A192-32X) with larger folios. The larger the folios, the larger the performance improvement. * While fork() performance without CONFIG_NO_PAGE_MAPCOUNT seems to be almost unchanged on some systems, I saw some degradation for smaller folios on the AmpereOne A192-32X. I did not investigate the details yet, but I suspect code layout changes or suboptimal code placement / inlining. I'm not to worried about the fork() micro-benchmarks for smaller folios given how shaky the results are lately and by how much we improved fork() performance recently. I also ran case-anon-cow-rand and case-anon-cow-seq part of vm-scalability, to assess the scalability and the impact of the bit-spinlock. My measurements on a two 2-socket 10-core Intel Xeon Silver 4210R CPU revealed no significant changes. Similarly, running these benchmarks with 2 MiB THPs enabled on the AmpereOne A192-32X with 192 cores, I got < 1% difference with < 1% stdev, which is nice. So far, I did not get my hands on a similarly large system with multiple sockets. I found no other fitting scalability benchmarks that seem to really hammer on concurrent mapping/unmapping of large folio pages like case-anon-cow-seq does. 5 Concerns ========== 5.1 Bit spinlock ---------------- I'm not quite happy about the bit-spinlock, but so far it does not seem to affect scalability in my measurements. If it ever becomes a problem we could either investigate improving the locking, or simply stopping the MM tracking once there are "too many mappings" and simply assume that the folio is "mapped shared" until it was freed. This would be similar (but slightly different) to the "0,1,2,stopped" counting idea Willy had at some point. Adding that logic to "stop tracking" adds more code to the hot path, so I avoided that for now. 5.2 folio_maybe_mapped_shared() ------------------------------- I documented the change from folio_likely_mapped_shared() to folio_maybe_mapped_shared() quite extensively. If we run into surprises, I have some ideas on how to resolve them. For now, I think we should be fine. 5.3 Added code to map/unmap hot path ------------------------------------ So far, it looks like the added code on the rmap hot path does not really seem to matter much in the bigger picture. I'd like to further reduce it (and possibly improve fork() performance further), but I don't easily see how right now. Well, and I am out of puff 🙂 Having that said, alternatives I considered (e.g., per-MM per-folio mapcount) would add a lot more overhead to these hot paths. 6 Future Work ============= 6.1 Large mapcount ------------------ It would be very handy if the large mapcount would count how often folio pages are actually mapped into page tables: a PMD on x86-64 would count 512 times. Calculating the average per-page mapcount will be easy, and remapping (PMD->PTE) folios would get even faster. That would also remove the need for the entire mapcount (except for PMD-sized folios for memory statistics reasons ...), and allow for mapping folios larger than PMDs (e.g., 4 MiB) easily. We likely would also have to take the same number of folio references to make our folio_mapcount() == folio_ref_count() work, and we'd want to be able to avoid mapcount+refcount overflows: this could already become an issue with pte-mapped PUD-sized folios (fsdax). One approach we discussed in the THP cabal meeting is (1) extending the mapcount for large folios to 64bit (at least on 64bit systems) and (2) keeping the refcount at 32bit, but (3) having exactly one reference if the the mapcount != 0. It should be doable, but there are some corner cases to consider on the unmap path; it is something that I will be looking into next. 6.2 hugetlb ----------- I'd love to make use of the same tracking also for hugetlb. The real problem is PMD table sharing: getting a page mapped by MM X and unmapped by MM Y will not work. With mshare, that problem should not exist (all mapping/unmapping will be routed through the mshare MM). [1] https://lwn.net/Articles/974223/ [2] https://lore.kernel.org/linux-mm/a9922f58-8129-4f15-b160-e0ace581bcbe@redhat.com/T/ [3] https://lkml.kernel.org/r/20240829165627.2256514-1-david@redhat.com [4] https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/pte-mapped-folio-benchmarks.c This patch (of 20): Let's factor it out into a simple helper function. This helper will also come in handy when working with code where we know that our folio is large. Maybe in the future we'll have the order readily available for small and large folios; in that case, folio_large_order() would simply translate to folio_order(). Link: https://lkml.kernel.org/r/20250303163014.1128035-1-david@redhat.com Link: https://lkml.kernel.org/r/20250303163014.1128035-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lance Yang <ioworker0@gmail.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andy Lutomirks^H^Hski <luto@kernel.org> Cc: Borislav Betkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michal Koutn <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: tejun heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When a bio with REQ_PREFLUSH is submitted to dm, __send_empty_flush() generates a flush_bio with REQ_OP_WRITE | REQ_PREFLUSH | REQ_SYNC, which causes the flush_bio to be throttled by wbt_wait(). An example from v5.4, similar problem also exists in upstream: crash> bt 2091206 PID: 2091206 TASK: ffff2050df92a300 CPU: 109 COMMAND: "kworker/u260:0" #0 [ffff800084a2f7f0] __switch_to at ffff80004008aeb8 #1 [ffff800084a2f820] __schedule at ffff800040bfa0c4 #2 [ffff800084a2f880] schedule at ffff800040bfa4b4 #3 [ffff800084a2f8a0] io_schedule at ffff800040bfa9c4 #4 [ffff800084a2f8c0] rq_qos_wait at ffff8000405925bc #5 [ffff800084a2f940] wbt_wait at ffff8000405bb3a0 #6 [ffff800084a2f9a0] __rq_qos_throttle at ffff800040592254 #7 [ffff800084a2f9c0] blk_mq_make_request at ffff80004057cf38 #8 [ffff800084a2fa60] generic_make_request at ffff800040570138 #9 [ffff800084a2fae0] submit_bio at ffff8000405703b4 #10 [ffff800084a2fb50] xlog_write_iclog at ffff800001280834 [xfs] torvalds#11 [ffff800084a2fbb0] xlog_sync at ffff800001280c3c [xfs] torvalds#12 [ffff800084a2fbf0] xlog_state_release_iclog at ffff800001280df4 [xfs] torvalds#13 [ffff800084a2fc10] xlog_write at ffff80000128203c [xfs] torvalds#14 [ffff800084a2fcd0] xlog_cil_push at ffff8000012846dc [xfs] torvalds#15 [ffff800084a2fda0] xlog_cil_push_work at ffff800001284a2c [xfs] torvalds#16 [ffff800084a2fdb0] process_one_work at ffff800040111d08 torvalds#17 [ffff800084a2fe00] worker_thread at ffff8000401121cc torvalds#18 [ffff800084a2fe70] kthread at ffff800040118de4 After commit 2def284 ("xfs: don't allow log IO to be throttled"), the metadata submitted by xlog_write_iclog() should not be throttled. But due to the existence of the dm layer, throttling flush_bio indirectly causes the metadata bio to be throttled. Fix this by conditionally adding REQ_IDLE to flush_bio.bi_opf, which makes wbt_should_throttle() return false to avoid wbt_wait(). Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com> Reviewed-by: Tianxiang Peng <txpeng@tencent.com> Reviewed-by: Hao Peng <flyingpeng@tencent.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>

0x011011110 and others added 30 commits August 29, 2022 18:14

x86/cpu: Add CPU model numbers for Meteor Lake

5515d21

Add model numbers for client and mobile parts. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220824175718.232384-1-tony.luck@intel.com

Merge branch 'am5748-fix' into fixes

2a906db

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Zstd negative level #7

Zstd negative level #7

qiangzhao commented Oct 4, 2022

Zstd negative level #7

Zstd negative level #7

Conversation

qiangzhao commented Oct 4, 2022