This document describes the devlink features implemented by the mlxsw
device driver.
| Name | Mode |
fw_load_policy |
driverinit |
The mlxsw driver also implements the following driver-specific
parameters.
| Name | Type | Mode | Description |
acl_region_rehash_interval |
u32 | runtime | Sets an interval for periodic ACL region rehashes. The value is
specified in milliseconds, with a minimum of 3000. The value of
0 disables periodic work entirely. The first rehash will be run
immediately after the value is set. |
The mlxsw driver supports reloading via DEVLINK_CMD_RELOAD
The mlxsw driver reports the following versions
| Name | Type | Description |
hw.revision |
fixed | The hardware revision for this board |
fw.psid |
fixed | Firmware PSID |
fw.version |
running | Three digit firmware version |
The mlxsw driver reports the following versions for line card auxiliary device
| Name | Type | Description |
hw.revision |
fixed | The hardware revision for this line card |
ini.version |
running | Version of line card INI loaded |
fw.psid |
fixed | Line card device PSID |
fw.version |
running | Three digit firmware version of line card device |
mlxsw| Name | Type | Description |
irif_disabled |
drop |
Traps packets that the device decided to drop because they need to be routed from a disabled router interface (RIF). This can happen during RIF dismantle, when the RIF is first disabled before being removed completely |
erif_disabled |
drop |
Traps packets that the device decided to drop because they need to be routed through a disabled router interface (RIF). This can happen during RIF dismantle, when the RIF is first disabled before being removed completely |