Immucore

The Kairos immutability management interface

What is Immucore?

---

Immucore is the management interface to mount Kairos disks and filesystems. It is a dracut module responsible for mounting the root tree during boot time with the specific immutable setup. The immutability concept refers to read only root (/) system. To ensure the linux OS is still functional certain filesystem paths are required to be writable, in those cases an ephemeral overlay tmpfs filesystem is set in place. Ephemeral refers that changes to files or dirs in this filesystem will be lost upon reboot.

Additionally, the immutable rootfs module can also mount a custom list of device blocks with read write permissions, those are mostly devoted to store persistent data.

Immucore is mostly configured via kernel command line parameters or via the /run/cos/cos-layout.env environment file.

These are the read write paths the module mounts as part of the overlay ephemeral tmpfs: /etc, /root, /home, /opt, /srv, /usr/local and /var.

Kernel configuration parameters

The immutable rootfs can be configured with the following kernel parameters:

• cos-img/filename=<imgfile>: This is one of the main parameters, it defines the location of the image file to boot from. This defines the booting mode for Immucore, setting in motion the full workflow to end up with an immutable system.

• rd.immucore.overlay=tmpfs:<size>: This defines the size of the tmpfs used for the ephemeral overlayfs. It can be expressed in MiB or as a % of the available memory. Defaults to rd.immucore.overlay=tmpfs:20% if not present. Backwards compatible with the old rd.cos.overlay directive.

• rd.immucore.overlay=LABEL=<vol_label>: Optionally and mostly for debugging purposes the overlayfs can be mounted on top of a persistent block device. Block devices can be expressed by LABEL (LABEL=<blk_label>) or by UUID (UUID=<blk_uuid>) Backwards compatible with the old rd.cos.overlay directive.

• rd.immucore.mount=LABEL:<blk_label>:<mountpoint>: This option defines a persistent block device and its mountpoint. Block devices can also be defined by UUID (UUID=<blk_uuid>:<mountpoint>). This option can be passed multiple times. Backwards compatible with the old rd.cos.mount directive.

• rd.immucore.oemlabel=<label>: This option sets the label to search for in order to mount the OEM partition. Defaults to COS_OEM Backwards compatible with the old rd.cos.oemlabel directive.

• rd.immucore.oemtimeout=<seconds>: By default we assume the existence of a persistent block device labelled COS_OEM which is used to keep some configuration data (mostly cloud-init files). The immutable rootfs tries to mount this device at very early stages of the boot even before applying the immutable rootfs configs. It's done this way to enable the configuration of the immutable rootfs module within the cloud-init files. As the COS_OEM device might not be always present, the boot process just continues without failing after a certain timeout. This option configures such a timeout. Defaults to 5s. Backwards compatible with the old rd.cos.oemtimeout directive.

• rd.cos.debugrw/rd.immucore.debugrw: This is a boolean option, true if present, false if not. This option sets the root image to be mounted as a writable device. Note that this completely breaks the concept of an immutable root. This is helpful for debugging or testing purposes, so changes persist across reboots.

• rd.cos.disable/rd.immucore.disable: This is a boolean option, true if present, false if not. It disables the execution of any immutable rootfs module logic at boot.

• rd.immucore.debug: Enables debug logging

• rd.immucore.uki: Enables UKI booting

• rd.immucore.sysrootwait=<seconds>: Waits for the sysroot to be mounted up to before continuing with the boot process. This is useful when booting from CD/Netboot as immucore doesn't mount the /sysroot in those cases, but we want to run the initramfs stage once the system is ready. Sometimes dracut can be really slow and the default 1 minute of waiting is not enough. In those cases you can increase this value to wait more time. Defaults to 60s.

Configuration with an environment file

---

The immutable rootfs can be configured with the /run/cos/cos-layout.env environment file. It is important to note that all the immutable root configuration is applied in initrd before switching root and after rootfs cloud-init stage but before initramfs stage. So the immutable rootfs configuration via cloud-init using the /run/cos/cos-layout.env file is only effective if called in any of the rootfs.before, rootfs or rootfs.after cloud-init stages.

In the environment file, a few options are available:

• VOLUMES=LABEL=<blk_label>:<mountpoint>: This variable expects a block device and its mountpoint pair space separated list. The default cOS configuration is:

  VOLUMES="LABEL=COS_OEM:/oem LABEL=COS_PERSISTENT:/usr/local"

• OVERLAY: It defines the underlying device for the overlayfs as in rd.cos.overlay= kernel parameter.

• MERGE=true: When set, it makes the VOLUMES values to be merged with any other volume that might have been defined in the kernel command line. The merging criteria is simple: any overlapping volume is overwritten, all others are appended to whatever was already defined as a kernel parameter. If not defined defaults to true.

• RW_PATHS: This is a space separated list of paths. These are the paths that will be used for the ephemeral overlayfs. These are the paths that will be mounted as overlay on top of the OVERLAY (or rd.cos.overlay) device. Default value is:

  RW_PATHS="/etc /root /home /opt /srv /usr/local /var" Note: as those paths are overlay with an ephemeral mount (tmpfs), additional data wrote on those location won't be available on subsequent boots.

• PERSISTENT_STATE_TARGET: This is the folder where the persistent state data will be stored, if any. Default value is /usr/local/.state.

• PERSISTENT_STATE_PATHS: This is a space separated list of paths. These are the paths that will become writable and store its data inside PERSISTENT_STATE_TARGET. By default, this variable is empty, which means no persistent state area is created or used.

  Note: The specified paths needs either to exist or be located in an area which is writeable ( for example, inside locations specified with RW_PATHS). The dracut module will attempt to create non-existant directories, but might fail if the mountpoint where they are located is read-only.

• PERSISTENT_STATE_BIND="true|false": When this variable is set to true the persistent state paths are bind mounted (instead of using overlayfs) after being mirrored with the original content. By default, this variable is set to false.

Note that persistent state is set up once the ephemeral paths and persistent volumes are mounted. Persistent state paths can't be an already existing mount point. If the persistent state requires any of the paths that are part of the ephemeral area by default, then RW_PATHS needs to be defined to avoid overlapping paths.

For example a common cOS configuration can be expressed as part of the cloud-init configuration as follows:

name: example
stage:
  rootfs:
    - name: "Layout configuration"
      environment_file: /run/cos/cos-layout.env
      environment:
        VOLUMES: "LABEL=COS_OEM:/oem LABEL=COS_PERSISTENT:/usr/local"
        OVERLAY: "tmpfs:25%"

You can also see the default config that we provide in https://github.com/kairos-io/kairos/blob/master/overlay/files/system/oem/11_persistency.yaml

What is the default workflow of Immucore

---

It starts pretty early in the boot process, just after systemd-udev-settle.service and before dracut-initqueue.service. To see the full bootup process from dracut you can check here.

Just after starting, Immucore mounts /proc if it's not mounted, it does so in order to read the /proc/cmdline and obtains the different stanzas in order to configure itself. After checking the cmdline, it knows in which path is being booted, either active/passive/recovery or Netboot/LiveCD/Do nothing.

Based on that it builds a DAG with the steps needed to complete and process through the DAG until its completed. It also builds a State object which has all the configs needed to mount and configure the system properly. Once the DAG has been completed (and with no errors), Immucore its finished, and it's ready for the initramfs init process to do a switch_root and pivot into the final root to boot the system.

When booting from Netboot/LiveCD/Do nothing (rd.cos.disable or rd.immucore.disable on the cmdline) the DAG is pretty simple. It proceeds to create a sentinel file under /run/cos/ with the boot mode (live_mode), so cloud configs can identify that they are booting from live media and ends.

When booting from active/passive/recovery the DAG gets a bit more complicated. You can see the default DAG for an active/passive/recovery system by running Immucore with --dry-run.

1.
 <init> (background: false) (weak: false)
2.
 <mount-state> (background: false) (weak: false)
 <mount-base-overlay> (background: false) (weak: false)
 <mount-tmpfs> (background: false) (weak: false)
 <create-sentinel> (background: false) (weak: false)
3.
 <discover-state> (background: false) (weak: false)
4.
 <mount-root> (background: false) (weak: false)
5.
 <mount-oem> (background: false) (weak: false)
6.
 <rootfs-hook> (background: false) (weak: false)
7.
 <load-config> (background: false) (weak: false)
8.
 <custom-mount> (background: false) (weak: false)
 <overlay-mount> (background: false) (weak: false)
9.
 <mount-bind> (background: false) (weak: false)
10.
 <write-fstab> (background: false) (weak: true)

As shown in the DAG, the steps are in order and that shows their dependencies, i.e. mount-root depends on discover-state and that is why it's just below it. It won't run until the previous step has completed without errors. There is also the weak value which indicates that this step has weak dependencies. It will run even if its dependencies failed, instead of refusing to run.

Steps explained

• mount-state: Will mount the COS_STATE partition under /run/initramfs/cos-state
• mount-tmpfs: Will mount /tmp
• create-sentinel: Will create the sentinel file identifying the boot mode (active_mode, passive_mode, recovery_mode or live_mode) under /run/cos/
• mount-base-overlay: Will mount the base overlay under /run/overlay
• discover-state: Will find the correct image under /run/initramfs/cos-state and mount it as a loop device
• mount-root: Will mount the /dev/disk/by-label/$LABEL device under the sysroot (Usually /sysroot). This label is set in grub depending on the selected entry, as part of the cmdline (i.e. root=LABEL=COS_ACTIVE)
• mount-oem: Will try to mount the oem label device under /sysroot/oem. This label is set in grub by default (rd.cos.oemlabel=COS_OEM) but also on the default cos-layout.env file with Kairos. This partition is not mandatory so It's allowed to fail
• rootfs-hook: Runs the cloud config stage rootfs. Notice that this runs very early in the process so things like binds or RW paths are not yet mounted
• load-config: This parses the /run/cos/cos-layout.env file (usually generated by the rootfs stage) and loads all the configurations
• overlay-mount: This mounts the paths set in the config (RW_PATHS) under the /run/overlay dir, so they are RW
• custom-mount: This mounts the paths set in the config (VOLUMES) or in cmdline rd.cos.mount= in the given path (LABEL=COS_PERSISTENT:/usr/local)
• mount-bind: This mounts the paths set in the config (PERSISTENT_STATE_PATHS and CUSTOM_BIND_MOUNTS) as bind mounts under the PERSISTENT_STATE_TARGET which defaults to /usr/local/.state
• write-fstab: Writes the final fstab with all the mounts into /sysroot/fstab
• initramfs-hook: Runs the cloud config stage initramfs. Note that this is run under a chroot into what will be the final system (/sysroot).
• wait-for-sysroot: Waits for the /sysroot and /sysroot/system dirs to be available, which means that they are mounted. Useful when booting from CD/Netboot as immucore doesn't mount the /sysroot in those cases, but we want to run the initramfs stage once the system is ready.

UKI mode (Experimental)

---

Currently, there is experimental support to boot in UKI mode without doing a final switch_root into /sysroot This means that the initramfs is not really an initramfs. Nevertheless, the final system and contains all the needed parts to boot. This, mixed with a UKI binary in which we dump everything into the final binary, means that you can have a single EFI file with your full system.

This is currently activated by setting the rd.immucore.uki on the cmdline.

---

Documentation	Contribute
📚 Getting started with Kairos 💡 Examples 🎥 Video 👐Engage with the Community	🙌 CONTRIBUTING.md 🙋 GOVERNANCE 👷Code of conduct