This is a first development distribution to the suite DensToolKit. If you like it, please consider it citing us in your work: Comput. Phys. Commun. (2015), http://dx.doi.org/10.1016/j.cpc.2015.07.005.
You can get DensToolKit's source code as follows. In your bash terminal type:
$cd /local/path/to/dtk
$git clone https://github.com/jmsolano/denstoolkit.git
After this, git will transfer the source files to /local/path/to/dtk/denstoolkit
Optionally, you may want to first run
$/local/path/to/dtk/src/checkdependencies
This will check that auxiliary programs (to plot the data computed by DensToolKit) are installed in your system. You can skip this step if you are only interested in obtaining the numerical data. You may process the data later with your preferred plotting program.
For building the binaries, type:
$cd denstoolkit/src
$make
$sudo make install
This should compile and install the binaries into /usr/local/bin
If you want to test the correct compilation of the program, type:
$make runtest
The above command will use the binaries present
in /local/path/to/dtk/denstoolkit/bin, therefore, the
tests can be made without running "sudo make install".
If you only need to get the latest version of DensToolKi, and you are not using
personal modifications to the source, in the local main directory (using the
above example should be /local/path/to/dtk/denstoolkit):
$git pull
$make distclean
$make
$sudo make install
This should update your binaries in the local installation directory.
DensToolKit contains paralellized implementation of almost all basic functions. For using the parallel version, you must edit the Makefile by changing the line
SETDTKNPROC=1
To use N processors, the above line should look like this:
SETDTKNPROC=N
In the current version, it is not advised to use more than 4 processors. There will be no speed improvement using more processors. Also, less than 3 makes no difference in the processing times.
#DensToolKit manual
The manual, wherein some formal theory is developed, and also where more information about how to use the programs of the suite can be viewed, is /local/path/to/dtk/denstoolkit/tex/dtkmanual/dtk-manual.pdf
#DensToolKitViewer As of version 1.2.0, we provide an experimental graphical viewer. It is based on Qt, OpenGL, and GLUT. This program is under construction and is expected to change somewhat frequently in the near future. Unfortunately, this program requires a bit of extra-effort to compile it in Linux. For further instructions, please visit https://github.com/jmsolano/denstoolkit/tree/master/src/dtkview. For MacOSX, we are temporarily distributing through JMSA's personal website:
#Developer instructions
Please, notice that the described in the "Git instructions" section will provide read-only access to the repository. If you would like to become a source code contributor of this project, then you would need a different approach. In essence you need to create your own github account, and then you fork this project (using the Fork button on the right upper corner of the github webpage). Your changes should be commited and pushed to your own repository.
After this, a pull request should be made. We will then review your contribution, and consider it for inclusion in the official distribution. All contributions are welcome!
#Contributions and List of Contributors
We welcome all contributions to this project. If you would like to contribute to it, please tell us by creating a new issue (visit https://github.com/jmsolano/denstoolkit/issues and create a new issue).
For a complete list of contributors, please visit:
https://github.com/jmsolano/denstoolkit/blob/master/src/CONTRIBUTORS