Firmware for stick MODKAM СС2538 (with the FLASH button and without the FLASH button)

Changelog

jh_2538_router_20200520.hex

• Fixed bug with Identify cluster;
• Allowed Bootloader. Low on PA7;
• Disabled constant light LED4;
• NWK_MAX_DEVICE_LIST = 100;

jh_2538_router_20200522.hex

• Fixed a problem with switching to bootloader mode after holding the FLASH button (PA7) for a long time.
• Added function to reset the device to factory settings by quickly pressing the RESET button 5 times. Pressing is considered fast if made before the LED1 is turned on;
• NWK_MAX_DEVICE_LIST = 40;

jh_2538_router_20210115.hex

• NWK_LINK_STATUS_PERIOD = 15 sec;
• Model Identifier - cc2538.router.v2;
• Date Code - 20210115;
• Added measurement and reporting of temperature from the internal sensor. Cluster Device Temperature Configuration (0x0002), CurrentTemperature attribute (0x0000). Reportin every 1 second;

jh_2538_router_20210310.hex

• The temperature report period changes from 1 second to 15 seconds;
• Date Code - 20210310;

Basic version

\Z-Stack 3.0.2\Projects\zstack\HomeAutomation\GenericApp\CC2538\

Indication

LED1 (blue, PB1) is used for indication.

• Blinking with a frequency of 1 Hz, glow duration 500 ms - search mode for an available network;
• Constant glow - a device on the network;
• LED goes out for 1 second. - confirmation of pressing the FLASH button;
• Blinking with a frequency of 1 Hz, the duration of the glow of 100 ms - mode Identify;
• Blinking with a frequency of 5 Hz, glow time 100 ms - to continue the reset, release FLASH (PA7);

Control

• Power on starts the process of searching / joining the network;
• Holding down the FLASH button for more than 5 seconds resets the device to factory settings and a software RESET is performed. Since a low level at FLASH (PA7) is a condition for entering Bootloader mode after RESET, a quick blinking LED1 (frequency 5Hz) indicates that the condition for reset is met, but you must release it to continue button;
• A short press on the FLASH button sends ReportAttr (cluster 0x0 Basic, attribute 0x5 modelID);

Simple Descriptor

Endpoint: 1
Profile: Home Automation (0x0104)
Application Device: Unknown (0x0100)
Input Cluster Count: 2
Input Cluster List
    Input Cluster: Basic (0x0000)
    
        Attribute: ZCL Version (0x0000)
        Data Type: 8-Bit Unsigned Integer (0x20)
        Uint8: 1 (0x01)
            
        Attribute: HW Version (0x0003)
        Data Type: 8-Bit Unsigned Integer (0x20)
        Uint8: 1 (0x01)
        
        Attribute: Manufacturer Name (0x0004)
        Data Type: Character String (0x42)
        String: jethome
    
        Attribute: Model Identifier (0x0005)
        Data Type: Character String (0x42)
        String: cc2538.router.v1    //(v2)
   
        Attribute: Date Code (0x0006)
        Data Type: Character String (0x42)
        String: 20200520 

    Input Cluster: Identify (0x0003)    
    Input Cluster: Device Temperature Configuration (0x0002) (only v2)
        Attribute: CurrentTemperature (0x0000)
        Data Type: 16-Bit Unsigned Integer (0x29)
        Uint16: temperature from internal sensor
Output Cluster Count: 1
Output Cluster List
    Output Cluster: Basic (0x0000)

z2m converter

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const e = exposes.presets;

const device = {
    zigbeeModel: ['cc2538.router.v2'],
    model: 'cc2538.router.v2',
    vendor: 'jethome',
    description: 'zigbee router cc2538 with temperature sensor',
    fromZigbee: [fz.ignore_basic_report, fz.device_temperature],
    toZigbee: [],
    exposes: [e.device_temperature(), e.linkquality()],
};

module.exports = device;