Skip to content

Latest commit

 

History

History
266 lines (198 loc) · 6.57 KB

part-7-manual-steps.md

File metadata and controls

266 lines (198 loc) · 6.57 KB
Raw

Manual Beginning to End for Part-7

In order to begin the manual steps for this part, FIRST follow the steps from part-6b's README.md to completion. This includes running the post-apply.sh script after running a terraform apply. This will get the NON-service-mesh consul cluster, server, and clients all up and running.

Note: If you're looking part-6 manual instructions, those are just the README on the part-6-manual branch.

1 - Update the Consul Server

  1. SSH into your Bastion server
ssh -A ubuntu@<bastion_ip>
  1. SSH into your Consul Server
ssh ubuntu@<consul_server_private_ip>
  1. Open up the /etc/consul.d/consul.hcl and add the following to the bottom of the file:
# Below is what's required for service mesh
ports {
  grpc = 8502
}

connect {
  enabled = true
}

# these are the default settings used for the proxies
# the equivalent for services is `service-defaults` in the `kind` argument
config_entries {
  bootstrap = [
    {
      kind = "proxy-defaults"
      name = "global"
      config {
        protocol                   = "http"
      }
    }
  ]
}
  1. Restart consul on the server:
sudo systemctl restart consul

2 - Update the Consul API

  1. SSH into your Bastion server
ssh -A ubuntu@<bastion_ip>
  1. SSH into your Consul API Client
ssh ubuntu@<consul_api_client_private_ip>
  1. Install func-e:
curl https://func-e.io/install.sh | bash -s -- -b /usr/local/bin

# install a consul supported version of envoy
func-e use 1.18.4

# make the bin available
cp /root/.func-e/versions/1.18.4/bin/envoy /usr/local/bin/
  1. Open the /etc/consul.d/consul.hcl file and add the following to the end:
ports {
  grpc = 8502
}
  • yes, that's really all you need to add
  1. Open the /etc/consul.d/api.hcl file and add the following under the check block:
# this should be nested in the "service" block under the "check" block
connect {
  sidecar_service {
    port = 20000
    check {
      name     = "Connect Envoy Sidecar"
      tcp      = "127.0.0.1:20000"
      interval = "10s"
    }
  }
}
  1. Create a new file at /etc/systemd/system/consul-envoy.service and input the following:
[Unit]
Description=Consul Envoy
After=syslog.target network.target

# Put api service token here for the -token option!
[Service]
ExecStart=/usr/bin/consul connect envoy -sidecar-for=api -token=api_service_token
ExecStop=/bin/sleep 5
Restart=always

[Install]
WantedBy=multi-user.target
  • be sure to replace api_service_token with your client_api_service_token from tokens.txt!
  1. Restart consul and api and start consul-envoy:
sudo systemctl daemon-reload
sudo systemctl restart consul
sudo systemctl restart api
sudo systemctl start consul-envoy
  • in the event that consul-envoy fails, restart it with systemctl restart consul-envoy.

3 - Update the Consul Web

  1. SSH into your Bastion server
ssh -A ubuntu@<bastion_ip>
  1. SSH into your Consul Web Client
ssh ubuntu@<consul_web_client_private_ip>
  1. Install func-e:
curl https://func-e.io/install.sh | bash -s -- -b /usr/local/bin

# install a consul supported version of envoy
func-e use 1.18.4

# make the bin available
cp /root/.func-e/versions/1.18.4/bin/envoy /usr/local/bin/
  1. Open the /etc/consul.d/consul.hcl file and add the following to the end:
ports {
  grpc = 8502
}
  1. Open the /etc/consul.d/web.hcl file and add the following under the check block:
connect {
  sidecar_service {
    port = 20000
    check {
      name     = "Connect Envoy Sidecar"
      tcp      = "127.0.0.1:20000"
      interval = "10s"
    }
    proxy {
      upstreams {
        destination_name   = "api"
        local_bind_address = "127.0.0.1"
        local_bind_port    = 9091
      }
    }
  }
}
  1. Open the /etc/systemd/system/web.service file and modify the UPSTREAM_URIS as follows:
[Unit]
Description=WEB
After=syslog.target network.target

[Service]
Environment="MESSAGE=Hello from Web"
Environment="NAME=web"
Environment="UPSTREAM_URIS=http://127.0.0.1:9091"
ExecStart=/usr/local/bin/fake-service
ExecStop=/bin/sleep 5
Restart=always

[Install]
WantedBy=multi-user.target
  • the difference is the http://127.0.0.1:9091 value
  1. Create a new file at /etc/systemd/system/consul-envoy.service and input the following:
[Unit]
Description=Consul Envoy
After=syslog.target network.target

# Put web service token here for the -token option!
[Service]
ExecStart=/usr/bin/consul connect envoy -sidecar-for=web -token=web_service_token
ExecStop=/bin/sleep 5
Restart=always

[Install]
WantedBy=multi-user.target
  • be sure to replace web_service_token with your client_web_service_token from tokens.txt!
  1. Restart consul and web and start consul-envoy:
sudo systemctl daemon-reload
sudo systemctl restart consul
sudo systemctl restart web
sudo systemctl start consul-envoy
  • in the event that consul-envoy fails, restart it with systemctl restart consul-envoy.

4 - Setup Consul Intention

THis is to allow traffic between api and web via service mesh.

Head to the Consul UI via your consul_server output from Terraform (the application load balancer DNS for the server).

  1. Login with your root token (the consul_token output, you can find it in your state file)

  2. Head to Intentions.

  3. Click Create.

  4. For Source, select web.

  5. For Destination, select api.

  6. For source connection to destination, select Allow.

  7. Click Save.

5 - Check Everything

  1. To verify everything is working, check out your Consul UI...

    • All services in the Services tab should be green.
    • All nodes in the Nodes tab should be green.

  2. To verify the web service is up and running, head to the DNS printed in the terraform output as web_server

    • It shouldn't have any errors