Merge pull request tasmota#477 from ayavilevich/development

blakadder · web-flow · commit 3440f6d8ec6d · 2020-10-12T16:37:18.000+02:00
Docs for arendst/Tasmota/pull/9472
diff --git a/docs/Commands.md b/docs/Commands.md
@@ -526,7 +526,7 @@ Command|Parameters
 :---|:---
 IRsend`<x>`<a id="IRsend"></a>|`<x>` [_optional_] = number of times the IR message is sent. If not specified or `0..1`, the message is sent only once (i.e., not repeated) _(default)_<BR>`>1` = emulate a long-press on the remote control, sending the message `<x>` times, or sending a repeat message for specific protocols (like NEC)<BR><BR>`{"Protocol":"<value>","Bits":<value>,"Data":<value>,"DataLSB":<value>,"Repeat":<value>}`<BR><BR>`"Protocol"` or `"Vendor"` (select one of the following): <BR>`RC5, RC6, NEC, SONY, PANASONIC, JVC, SAMSUNG, WHYNTER, AIWA_RC_T501, LG, MITSUBISHI, DISH, SHARP, DENON, SHERWOOD, RCMM, SANYO_LC7461, RC5X, NEC (non-strict), NIKAI, MAGIQUEST, LASERTAG, CARRIER_AC, MITSUBISHI2, HITACHI_AC1, HITACHI_AC2, GICABLE, LUTRON, PIONEER, LG2, SAMSUNG36, LEGOPF, INAX, DAIKIN152`<BR><BR>`"Bits":1..64` = required number of data bits<BR>&nbsp;&nbsp;&nbsp;&nbsp;for PANASONIC protocol this parameter is the the address, not the number of bits<BR><BR>`"Data":0x1..0xFFFFFFFFFFFFFFFF` = data frame as 64 bit hexadecimal.<BR>&nbsp;&nbsp;&nbsp;&nbsp;e.g., `IRsend {"Protocol":"NEC","Bits":32,"Data":0x8166817E}`<BR>**Or**<BR>`"DataLSB":0x1..0xFFFFFFFFFFFFFFFF` = data frame as 64 bit hexadecimal with LSB (each byte with bits reversed).<BR>&nbsp;&nbsp;&nbsp;&nbsp;e.g., `IRsend {"Protocol":"NEC","Bits":32,"Data":0x8166817E}`<BR>`DataLSB` comes handy with LSB-first (Least Significant Bit First) protocols like NEC, and makes decoding/encoding easier.<BR><BR>`"Repeat":0..<x>` if `0` send the frame once, if `>0` simulates a long press; Note: `"Repeat":1` sends the message twice.<BR><BR>Alternatively, you can send IR remote control codes using [RAW command encoding](IRSend-RAW-Encoding).
 |See also<BR>[`SetOption29`](Commands#setoption29)  - Set IR received data format<BR>[`SetOption38`](Commands#setoption38)  - Set IR received protocol sensitivity<BR>[`SetOption58`](Commands#setoption58) - [IR Raw data in JSON payload](https://github.com/arendst/Tasmota/issues/2116#issuecomment-440716483)
-IRhvac<a id="IRhvac"></a>|Send HVAC IR remote control code as JSON payload<BR><BR>```IRhvac {"Vendor":"Mitsubishi_Heavy_152", "Power":"On","Mode":"Hot","FanSpeed":3,"Temp":22.5}```<BR><BR>`"Protocol"` or `"Vendor"` (select one of the following): <BR>`COOLIX, DAIKIN, KELVINATOR, MITSUBISHI_AC, GREE, ARGO, TROTEC, TOSHIBA_AC, FUJITSU_AC, MIDEA, HAIER_AC, HITACHI_AC, HAIER_AC_YRW02, WHIRLPOOL_AC, SAMSUNG_AC, ELECTRA_AC, PANASONIC_AC, DAIKIN2, VESTEL_AC, TECO, TCL112AC, MITSUBISHI_HEAVY_88, MITSUBISHI_HEAVY_152, DAIKIN216, SHARP_AC, GOODWEATHER, DAIKIN160, NEOCLIMA, DAIKIN176, DAIKIN128`<BR><BR>`"Model":` Some HVAC have variants in protocols, this field allows to specify the variant, see [detailed list](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/SupportedProtocols.md).<BR><UL><LI>`Fujitsu_AC`: `ARRAH2E|ARDB1`</LI><LI>`Panasonic_AC`: `LKE|NKE|DKE|JKE|CKP|RKR`</LI><LI>`Whirlpool_AC`: `DG11J13A|DG11J104|DG11J1-04|DG11J191`</LI></UL>`"Power"`:<UL><LI>`On, Yes, True, 1`</LI><LI>`Off, No, False, 0`</LI></UL>`"Mode"`:<UL><LI>`Off, Stop`</LI><LI>`Auto, Automatic`</LI><LI>`Cool, Cooling`</LI><LI>`Heat, Heating`</LI><LI>`Dry, Drying, Dehumidify`</LI><LI>`Fan, Fanonly, Fan_Only`</LI></UL>`"FanSpeed"`:<UL><LI>`Auto, Automatic`</LI><LI>`Min, Minimum, Lowest, 1`</LI><LI>`Low, 2`</LI><LI>`Med, Medium, Mid, 3`</LI><LI>`High, Hi, 4`</LI><LI>`Max, Maximum, Highest, 5`</LI></UL>`"SwingV"`: vertical swing of Fan<UL><LI>`Auto, Automatic, On, Swing`</LI><LI>`Off, Stop`</LI><LI>`Min, Minimum, Lowest, Bottom, Down`</LI><LI>`Low`</LI><LI>`Mid, Middle, Med, Medium, Centre, Center`</LI><LI>`High, Hi`</LI><LI>`Highest, Max, Maximum, Top, Up`</LI></UL>`"SwingH"`: horizontal swing of Fan<UL><LI>`Auto, Automatic, On, Swing`</LI><LI>`Off, Stop`</LI><LI>`LeftMax, Left Max, MaxLeft, Max Left, FarLeft, Far Left`</LI><LI>`Left`</LI><LI>`Mid, Middle, Med, Medium, Centre, Center`</LI><LI>`Right`</LI><LI>`RightMax, Right Max, MaxRight, Max Right, FarRight, Far Right`</LI><LI>`Wide`</LI></UL>`"Celsius"`: temperature is in Celsius (`"On"`) of Farenheit (`"Off"`)<BR>`"Temp"`: Temperature, can be float if supported by protocol<BR>`"Quiet"`: Quiet mode (`"On"` / `"Off"`)<BR>`"Turbo"`: Turbo mode (`"On"` / `"Off"`)<BR>`"Econo"`: Econo mode (`"On"` / `"Off"`)<BR>`"Light"`: Light (`"On"` / `"Off"`)<BR>`"Filter"`: Filter active (`"On"` / `"Off"`)<BR>`"Clean"`: Clean mode (`"On"` / `"Off"`)<BR>`"Beep"`: Beep active (`"On"` / `"Off"`)<BR>`"Sleep"`: Timer in seconds
+IRhvac<a id="IRhvac"></a>|Send HVAC IR remote control code as JSON payload<BR><BR>```IRhvac {"Vendor":"Mitsubishi_Heavy_152", "Power":"On","Mode":"Hot","FanSpeed":3,"Temp":22.5}```<BR><BR>`"Protocol"` or `"Vendor"` (select one of the following): <BR>`COOLIX, DAIKIN, KELVINATOR, MITSUBISHI_AC, GREE, ARGO, TROTEC, TOSHIBA_AC, FUJITSU_AC, MIDEA, HAIER_AC, HITACHI_AC, HAIER_AC_YRW02, WHIRLPOOL_AC, SAMSUNG_AC, ELECTRA_AC, PANASONIC_AC, DAIKIN2, VESTEL_AC, TECO, TCL112AC, MITSUBISHI_HEAVY_88, MITSUBISHI_HEAVY_152, DAIKIN216, SHARP_AC, GOODWEATHER, DAIKIN160, NEOCLIMA, DAIKIN176, DAIKIN128`<BR><BR>`"Model":` Some HVAC have variants in protocols, this field allows to specify the variant, see [detailed list](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/SupportedProtocols.md).<BR><UL><LI>`Fujitsu_AC`: `ARRAH2E|ARDB1`</LI><LI>`Panasonic_AC`: `LKE|NKE|DKE|JKE|CKP|RKR`</LI><LI>`Whirlpool_AC`: `DG11J13A|DG11J104|DG11J1-04|DG11J191`</LI></UL>`"Power"`:<UL><LI>`On, Yes, True, 1`</LI><LI>`Off, No, False, 0`</LI></UL>`"Mode"`:<UL><LI>`Off, Stop`</LI><LI>`Auto, Automatic`</LI><LI>`Cool, Cooling`</LI><LI>`Heat, Heating`</LI><LI>`Dry, Drying, Dehumidify`</LI><LI>`Fan, Fanonly, Fan_Only`</LI></UL>`"FanSpeed"`:<UL><LI>`Auto, Automatic`</LI><LI>`Min, Minimum, Lowest, 1`</LI><LI>`Low, 2`</LI><LI>`Med, Medium, Mid, 3`</LI><LI>`High, Hi, 4`</LI><LI>`Max, Maximum, Highest, 5`</LI></UL>`"SwingV"`: vertical swing of Fan<UL><LI>`Auto, Automatic, On, Swing`</LI><LI>`Off, Stop`</LI><LI>`Min, Minimum, Lowest, Bottom, Down`</LI><LI>`Low`</LI><LI>`Mid, Middle, Med, Medium, Centre, Center`</LI><LI>`High, Hi`</LI><LI>`Highest, Max, Maximum, Top, Up`</LI></UL>`"SwingH"`: horizontal swing of Fan<UL><LI>`Auto, Automatic, On, Swing`</LI><LI>`Off, Stop`</LI><LI>`LeftMax, Left Max, MaxLeft, Max Left, FarLeft, Far Left`</LI><LI>`Left`</LI><LI>`Mid, Middle, Med, Medium, Centre, Center`</LI><LI>`Right`</LI><LI>`RightMax, Right Max, MaxRight, Max Right, FarRight, Far Right`</LI><LI>`Wide`</LI></UL>`"Celsius"`: temperature is in Celsius (`"On"`) of Farenheit (`"Off"`)<BR>`"Temp"`: Temperature, can be float if supported by protocol<BR>`"Quiet"`: Quiet mode (`"On"` / `"Off"`)<BR>`"Turbo"`: Turbo mode (`"On"` / `"Off"`)<BR>`"Econo"`: Econo mode (`"On"` / `"Off"`)<BR>`"Light"`: Light (`"On"` / `"Off"`)<BR>`"Filter"`: Filter active (`"On"` / `"Off"`)<BR>`"Clean"`: Clean mode (`"On"` / `"Off"`)<BR>`"Beep"`: Beep active (`"On"` / `"Off"`)<BR>`"Sleep"`: Timer in seconds<BR>`"StateMode"`:<UL><LI>`SendOnly` (default)</LI><LI>`StoreOnly`</LI><LI>`SendStore`</LI></UL>
 |See also<BR>[`SetOption29`](#setoption29)  - Set IR received data format<BR>[`SetOption38`](#setoption38)  - Set IR received protocol sensitivity<BR>[`SetOption58`](#setoption58) - [IR Raw data in JSON payload](https://github.com/arendst/Tasmota/issues/2116#issuecomment-440716483)
     
 
diff --git a/docs/Tasmota-IR.md b/docs/Tasmota-IR.md
@@ -30,7 +30,18 @@ IRsend`<x>`<a id="IRsend"></a>|`<x>` [_optional_] = number of times the IR messa
 
 Command|Parameters
 :---|:---
-IRhvac<a id="IRhvac"></a>|Send HVAC IR remote control code as JSON payload<BR><BR>```IRhvac {"Vendor":"Mitsubishi_Heavy_152", "Power":"On","Mode":"Hot","FanSpeed":3,"Temp":22.5}```<BR><BR>`"Protocol"` or `"Vendor"` (select one of the following): <BR>`COOLIX, DAIKIN, KELVINATOR, MITSUBISHI_AC, GREE, ARGO, TROTEC, TOSHIBA_AC, FUJITSU_AC, MIDEA, HAIER_AC, HITACHI_AC, HAIER_AC_YRW02, WHIRLPOOL_AC, SAMSUNG_AC, ELECTRA_AC, PANASONIC_AC, DAIKIN2, VESTEL_AC, TECO, TCL112AC, MITSUBISHI_HEAVY_88, MITSUBISHI_HEAVY_152, DAIKIN216, SHARP_AC, GOODWEATHER, DAIKIN160, NEOCLIMA, DAIKIN176, DAIKIN128`<BR><BR>`"Model":` Some HVAC have variants in protocols, this field allows to specify the variant, see [detailed list](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/SupportedProtocols.md).<BR><UL><LI>`Fujitsu_AC`: `ARRAH2E|ARDB1`</LI><LI>`Panasonic_AC`: `LKE|NKE|DKE|JKE|CKP|RKR`</LI><LI>`Whirlpool_AC`: `DG11J13A|DG11J104|DG11J1-04|DG11J191`</LI></UL>`"Power"`:<UL><LI>`On, Yes, True, 1`</LI><LI>`Off, No, False, 0`</LI></UL>`"Mode"`:<UL><LI>`Off, Stop`</LI><LI>`Auto, Automatic`</LI><LI>`Cool, Cooling`</LI><LI>`Heat, Heating`</LI><LI>`Dry, Drying, Dehumidify`</LI><LI>`Fan, Fanonly, Fan_Only`</LI></UL>`"FanSpeed"`:<UL><LI>`Auto, Automatic`</LI><LI>`Min, Minimum, Lowest, 1`</LI><LI>`Low, 2`</LI><LI>`Med, Medium, Mid, 3`</LI><LI>`High, Hi, 4`</LI><LI>`Max, Maximum, Highest, 5`</LI></UL>`"SwingV"`: vertical swing of Fan<UL><LI>`Auto, Automatic, On, Swing`</LI><LI>`Off, Stop`</LI><LI>`Min, Minimum, Lowest, Bottom, Down`</LI><LI>`Low`</LI><LI>`Mid, Middle, Med, Medium, Centre, Center`</LI><LI>`High, Hi`</LI><LI>`Highest, Max, Maximum, Top, Up`</LI></UL>`"SwingH"`: horizontal swing of Fan<UL><LI>`Auto, Automatic, On, Swing`</LI><LI>`Off, Stop`</LI><LI>`LeftMax, Left Max, MaxLeft, Max Left, FarLeft, Far Left`</LI><LI>`Left`</LI><LI>`Mid, Middle, Med, Medium, Centre, Center`</LI><LI>`Right`</LI><LI>`RightMax, Right Max, MaxRight, Max Right, FarRight, Far Right`</LI><LI>`Wide`</LI></UL>`"Celsius"`: temperature is in Celsius (`"On"`) of Farenheit (`"Off"`)<BR>`"Temp"`: Temperature, can be float if supported by protocol<BR>`"Quiet"`: Quiet mode (`"On"` / `"Off"`)<BR>`"Turbo"`: Turbo mode (`"On"` / `"Off"`)<BR>`"Econo"`: Econo mode (`"On"` / `"Off"`)<BR>`"Light"`: Light (`"On"` / `"Off"`)<BR>`"Filter"`: Filter active (`"On"` / `"Off"`)<BR>`"Clean"`: Clean mode (`"On"` / `"Off"`)<BR>`"Beep"`: Beep active (`"On"` / `"Off"`)<BR>`"Sleep"`: Timer in seconds
+IRhvac<a id="IRhvac"></a>|Send HVAC IR remote control code as JSON payload<BR><BR>```IRhvac {"Vendor":"Mitsubishi_Heavy_152", "
+  ":"On","Mode":"Hot","FanSpeed":3,"Temp":22.5}```<BR><BR>`"Protocol"` or `"Vendor"` (select one of the following): <BR>`COOLIX, DAIKIN, KELVINATOR, MITSUBISHI_AC, GREE, ARGO, TROTEC, TOSHIBA_AC, FUJITSU_AC, MIDEA, HAIER_AC, HITACHI_AC, HAIER_AC_YRW02, WHIRLPOOL_AC, SAMSUNG_AC, ELECTRA_AC, PANASONIC_AC, DAIKIN2, VESTEL_AC, TECO, TCL112AC, MITSUBISHI_HEAVY_88, MITSUBISHI_HEAVY_152, DAIKIN216, SHARP_AC, GOODWEATHER, DAIKIN160, NEOCLIMA, DAIKIN176, DAIKIN128`<BR><BR>`"Model":` Some HVAC have variants in protocols, this field allows to specify the variant, see [detailed list](https://github.com/crankyoldgit/IRremoteESP8266/blob/master/SupportedProtocols.md).<BR><UL><LI>`Fujitsu_AC`: `ARRAH2E|ARDB1`</LI><LI>`Panasonic_AC`: `LKE|NKE|DKE|JKE|CKP|RKR`</LI><LI>`Whirlpool_AC`: `DG11J13A|DG11J104|DG11J1-04|DG11J191`</LI></UL>`"Power"`:<UL><LI>`On, Yes, True, 1`</LI><LI>`Off, No, False, 0`</LI></UL>`"Mode"`:<UL><LI>`Off, Stop`</LI><LI>`Auto, Automatic`</LI><LI>`Cool, Cooling`</LI><LI>`Heat, Heating`</LI><LI>`Dry, Drying, Dehumidify`</LI><LI>`Fan, Fanonly, Fan_Only`</LI></UL>`"FanSpeed"`:<UL><LI>`Auto, Automatic`</LI><LI>`Min, Minimum, Lowest, 1`</LI><LI>`Low, 2`</LI><LI>`Med, Medium, Mid, 3`</LI><LI>`High, Hi, 4`</LI><LI>`Max, Maximum, Highest, 5`</LI></UL>`"SwingV"`: vertical swing of Fan<UL><LI>`Auto, Automatic, On, Swing`</LI><LI>`Off, Stop`</LI><LI>`Min, Minimum, Lowest, Bottom, Down`</LI><LI>`Low`</LI><LI>`Mid, Middle, Med, Medium, Centre, Center`</LI><LI>`High, Hi`</LI><LI>`Highest, Max, Maximum, Top, Up`</LI></UL>`"SwingH"`: horizontal swing of Fan<UL><LI>`Auto, Automatic, On, Swing`</LI><LI>`Off, Stop`</LI><LI>`LeftMax, Left Max, MaxLeft, Max Left, FarLeft, Far Left`</LI><LI>`Left`</LI><LI>`Mid, Middle, Med, Medium, Centre, Center`</LI><LI>`Right`</LI><LI>`RightMax, Right Max, MaxRight, Max Right, FarRight, Far Right`</LI><LI>`Wide`</LI></UL>`"Celsius"`: temperature is in Celsius (`"On"`) of Farenheit (`"Off"`)<BR>`"Temp"`: Temperature, can be float if supported by protocol<BR>`"Quiet"`: Quiet mode (`"On"` / `"Off"`)<BR>`"Turbo"`: Turbo mode (`"On"` / `"Off"`)<BR>`"Econo"`: Econo mode (`"On"` / `"Off"`)<BR>`"Light"`: Light (`"On"` / `"Off"`)<BR>`"Filter"`: Filter active (`"On"` / `"Off"`)<BR>`"Clean"`: Clean mode (`"On"` / `"Off"`)<BR>`"Beep"`: Beep active (`"On"` / `"Off"`)<BR>`"Sleep"`: Timer in seconds<BR>`"StateMode"`:<UL><LI>`SendOnly` (default)</LI><LI>`StoreOnly`</LI><LI>`SendStore`</LI></UL>
+
+### Controling ACs with toggle fields
+
+Some ACs such as Airwell, Whirlpool and others use a differential IR protocol for some properites. If "power" is a toggle property, then value of '1' in the protocol will mean "turn off" if the AC is currently "on" and it will mean "turn on" if the AC is currently "off". This could also be the case for other properties such as "light", "swing", etc. Since Tasmota and IRRemote8266 send and receive absolute states (i.e. the HVAC JSON object has a field called 'Power' not 'PowerToggle'), some functionaly was added to keep track of the predicted  state of the AC. This way, if the predicted state is in-sync with the actual state, the device can transmit a correct IR packet to transition the AC from the previous state to the desired state. This logic is controlled by the `StateMode` HVAC property. If your AC IR protocol sends absolute values you can ignore this property. If your AC has a differential protocol Tasmota will be able to control the AC assuming the Tasmota IR device has at most one differential AC in IR range. If you would like to also control your AC with the physical remote your Tamsota IR device will need to have an IR receiver so that it can sync with the actual state.
+
+If at some point the state in Tasmota and the actual state get out of sync, you can specify `StateMode=StoreOnly` to update Tasmota with the actual state. This will update state but not send an IR command.
+
+Normally when receiving an IR command via the IR reciever the command will be processed and the state will be updated. As a result it is not needed to store state when sending as it will cause duplication and the toggle will happen twice. The most common operation mode, and default, therefore is `StateMode=SendOnly`.
+
+If your Tasmota device does not have an IR receiver you can still control a differential AC with it by specifying `StateMode=SendStore` but you will not be able to use a physical remote without loosing sync between the actual and predicted states.
 
 ## Receiving IR Commands
 If you have an IR receiver, a message will be logged each time an IR message is seen. IR driver will try to decode the message against all supported protocols. If unrecognized, the `"Protocol":"UNKNOWN"` will be shown. In this case, the `"Data"` field contains a hash of the received message. The hash can't be used to send the a message, but the same hash will be produced by the same message.  
