Home

Setting TTGO T-Beam (SoftRF) <--> Oudie(IGC) as a FLARM device

Info page TTGO T-Beam :

Setting page TTGO T-Beam :

Oudie - Setting - Input

Oudie - Setting - Input - Bluetooth

Oudie - Setting - Input - Bluetooth - Message - Press "Yes"

Oudie - Setting - Input - Bluetooth - Pairing - Press "Pair"

Oudie - Setting - Input - Port Setting

1.Choose COM5 - Bluetooth

2.Set Speed to 38400 ( >19200 ) . If speed is lower than 19200 no FLARM data is available on BT !!!!

Go to Setting - Hardware

Choose a device type "Others" . If you choose different device, Oudie may "freeze" !!!

Hardware info page on Oudie after setting.

Set Serial port to correct setting on "Port Settings"

Go to Terminal

Message about GPS - press Yes

Terminal output - data from your TTGO T-Beam. If you see this, everything is OK.

!!! You have to SAVE SETTING !!! If you don't save setting, Oudie forget this setting a after short time and it didn't work !!

Now you can see near by traffic

Now you can see nearby by traffic

Now you can edit "Radar Point"

Open "Row" with identification of radar point ( ID of another TTGO T-Beam / FLARM device )

Edit data and press OK

Go to Setting - Radar

Set what you want - Radar zoom, Voice warning, etc ... You have to save setting - "Save setting" on Oudie

For information : You have to see on the first row : Sat=XX , where XX is number of GPS SAT received by Oudie ( not by TTGO T-Beam ) !!