UPDATE: I Passed my CCNA on 17th July 2020.
.........
FOR DEATILED EXPLANATION : https://youtu.be/TsSCHq3rN0M and https://www.linkedin.com/in/imsiddhantin/
I'm currently preparing for my CCNA 200-301 Exam. During the preparation, I build some labs on various topics of Networking with the help of Cisco Packet Tracer. I hope, these labs will help you too during your preparations.
LAB 1:
In this VLAN LAB, 2 VLANs are created. Black & Blue. S3 & S4 are connected with Trunk Links. PC0 - PC2 & PC1 - PC3 can communicate across the switches.
LAB2:
Static Routes has been setup between Router1 & Router 0. To Communicate between VLAN 10 & VLAN 20, ROAS(Router on a Stick) is implemented.
LAB 3:
Router 0,1,2 & 3 are connected with RIP (Routing Information Protocol) All three networks 172.18.1.0, 10.2.1.0, 192.168.10.0 can communicate with each other using RIP
LAB 4:
IPV6 addresses are used (2001:0db8:0:0::/64) Range Static Routes are added via Router 15's G0/1/0 interface. Floating Route on Router 15 added via interface G0/0
LAB 5:
OSPF is implemented between all five routers in this LAB. Routers are having Router ID (1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4 and 5.5.5.5)
LAB 6:
HSRP(Hot Standby Routing Protocol) is implemented between Router0 & Router1. A virtual Router with IP Address of 10.1.1.4 /24 is also been setup. Router1 is Active and Router0 is on Standby to take over in case of any failures.
LAB 7:
A simple TACACS+ implementation has been done. Router is acting as a TACACS Client while server is providing authentication Services.
LAB 8:
In this implementation of WPA2 PSK, I have created a simple Wireless LAN where AP0, AP1 & AP2 are connected from Backbone Network (Switch 0). Each Access Point is running WIFI on different Channels to remove Overlapping. Each AP is also configured with different Security Settings.
LAB 9:
In this lab, I demonstrated the use of access control lists and how can they allow and deny certain types of traffic. Extended Access Lists are deployed.
LAB 10:
GRE Tunnel0 established between Router0 and Router1.