Skip to content

Latest commit

 

History

History
67 lines (52 loc) · 2.75 KB

README.md

File metadata and controls

67 lines (52 loc) · 2.75 KB
Raw

UniFi Protect ARM64

Run UniFi Protect in Docker on ARM64 hardware.

Usage

Run the container as a daemon:

docker run -d --name unifi-protect  \
    --privileged \
    --tmpfs /run \
    --tmpfs /run/lock \
    --tmpfs /tmp \
    -v /sys/fs/cgroup:/sys/fs/cgroup:ro \
    -v /storage/srv:/srv \
    -v /storage/data:/data \
    -v /storage/persistent:/persistent \
    --network host \
    -e STORAGE_DISK=/dev/sda1 \
    markdegroot/unifi-protect-arm64

Now you can access UniFi Protect at https://localhost/.

Storage

UniFi Protect needs a lot of storage to record video. Protect will fail to start if there is not at least 100GB disk space available, so make sure to store your Docker volumes on a disk with some space (/storage in the above run command).

Optional: Update the env variable STORAGE_DISK to your disk to see disk usage inside UniFi Protect.

Stuck at "Device Updating"

If you are stuck at a popup saying "Device Updating" with a blue loading bar after the initial setup, just run systemctl restart unifi-core inside the container or restart the entire container. This happens only the first time after the initial setup.

Build your own image

To build your own image download and extract the UNVR firmware and place the needed files in put-deb-files-here and put-version-file-here.

Build the image using:

docker build -t markdegroot/unifi-protect-arm64 .

Issues with remote access

There is a known issue that remote access to your UNVR (via the Ubnt cloud) will not work with the console unless the primary network interface is named enp0s2. To achieve this, on your host machine create the file /etc/systemd/network/98-enp0s2.link with the content below, replacing xx:xx:xx:xx:xx:xx with your actual MAC address.

[Match]
MACAddress=xx:xx:xx:xx:xx:xx

[Link]
Name=enp0s2

Make sure to update your network settings to reflect the new interface name. To apply the settings, run sudo update-initramfs -u and reboot your host machine.

Thanks: https://github.com/snowsnoot/unifi-unvr-arm64#issues-with-remote-access

Issues running Systemd inside Docker

If you're getting the following error (or any systemd error):

Failed to create /init.scope control group: Read-only file system
Failed to allocate manager object: Read-only file system
[!!!!!!] Failed to allocate manager object.
Exiting PID 1...

Boot the system with kernel parameter systemd.unified_cgroup_hierarchy=0

See: moby/moby#42275

Disclaimer

This Docker image is not associated with UniFi in any way. We do not distribute any third party software and only use packages that are freely available on the internet.